Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bellows Strap now too Short  (Read 1322 times)

0 Members and 1 Guest are viewing this topic.

David Robinson

  • Member
  • *
  • Offline Offline
  • Posts: 33
Bellows Strap now too Short
« on: May 15, 2025, 09:48:13 PM »

I recently replaced the worn bellows tape on the bottom of my Pokerwork with the modern, thicker type of tape.  Not surprisingly, this prevents the bellows closing quite so far at the bottom and means the bottom bellows strap doesn't reach by about 6mm.

The strap has metal ferrules reinforcing the holes so I can't easily alter the holes in it and I'm reluctant to re-position the fixing screw as it would then be rather near the edge and might split the wood.

I don't normally use the straps but I will be out and about more with the melodeon from now on and would like to be able to use the bellows straps if needed.

Re-taping bellows is commonplace, so how have others dealt with this - is there a preferred method for overcoming the problem?
Logged
Pokerwork DG, Castagnari Studio GC

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Bellows Strap now too Short
« Reply #1 on: May 16, 2025, 07:45:44 AM »

On a Pokerwork the normal route is to replace the bellows straps, which aren't particularly expensive. And or they are easy to make.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Bellows Strap now too Short
« Reply #2 on: May 16, 2025, 09:20:34 AM »

But surely a new strap from Hohner would be the same length, actually marginally shorter given that the old one would be stretched a little!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Bellows Strap now too Short
« Reply #3 on: May 16, 2025, 10:04:25 AM »

My method, after myriad retapings, I just removed the original fixing screw, filled the hole with cocktail stick/gle, drilled a new hole at the correct distance.

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: Bellows Strap now too Short
« Reply #4 on: May 16, 2025, 10:40:40 AM »

I recently replaced the worn bellows tape on the bottom of my Pokerwork with the modern, thicker type of tape.  Not surprisingly, this prevents the bellows closing quite so far at the bottom and means the bottom bellows strap doesn't reach by about 6mm.

The strap has metal ferrules reinforcing the holes so I can't easily alter the holes in it and I'm reluctant to re-position the fixing screw as it would then be rather near the edge and might split the wood.

I don't normally use the straps but I will be out and about more with the melodeon from now on and would like to be able to use the bellows straps if needed.

Re-taping bellows is commonplace, so how have others dealt with this - is there a preferred method for overcoming the problem?

OG accordions do nice ones with a hole in one end and other end you make your own hole. Look nice. Well made, unlike the new ones from hohner, which alas look the part but seem to be made of very poor quality leather (unless theyve upped their game since i ordered some a few years ago)
Logged

David VanVranken

  • Member
  • *
  • Offline Offline
  • Posts: 4
Re: Bellows Strap now too Short
« Reply #5 on: June 04, 2025, 04:48:46 AM »

I recently replaced the worn bellows tape on the bottom of my Pokerwork with the modern, thicker type of tape.  Not surprisingly, this prevents the bellows closing quite so far at the bottom and means the bottom bellows strap doesn't reach by about 6mm.

The strap has metal ferrules reinforcing the holes so I can't easily alter the holes in it and I'm reluctant to re-position the fixing screw as it would then be rather near the edge and might split the wood.

I don't normally use the straps but I will be out and about more with the melodeon from now on and would like to be able to use the bellows straps if needed.

Re-taping bellows is commonplace, so how have others dealt with this - is there a preferred method for overcoming the problem?

I'd gladly buy a new set of bellows straps, if I could find them. Hohner just says "out of stock" and wants you to call to get on a list. Nobody else has the one with the grommet and ferrules instead of the snap system used on newer ones.

If someone knows of, or has some, please let me (and the other David) know.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Bellows Strap now too Short
« Reply #6 on: June 04, 2025, 09:09:20 AM »

If I refurb a Hohner I normally fit new bellows straps, obtained from Carini. These have an eyelet in one end and I punch a hole in the other where required. On PWs and Ericas etc the screw has washers under and on top. They don't usually have a second eyelet. I really don't like making new holes in the casing so always fit new straps.
So here's the point: they are really easy to make with a few leather working tools. Get appropriate leather strapping from eBay and a rotary hole punch. Also some eyelets and punch kit (eBay again). A very sharp knife (scalpel though the surgical one I have is supernaturally sharp and I'm a bit scared of it) or Stanley with new blade. I also have an edge beveler to tidy up the edge and a curved end cutter, ditto, but you don't really need those parts. Then just cut the straps and put an eyelet in one end (tidy up the edges), punch hole in other end in the right place and voila, new straps. It's actually quite easy once you’ve experimented for a while. The trickiest bit is selecting the right thickness of leather.
« Last Edit: June 04, 2025, 09:13:50 AM by Rog »
Logged

xgx

  • Bagpipes & Musette Boxes... and Banjos, luv 'em!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1157
Re: Bellows Strap now too Short
« Reply #7 on: June 04, 2025, 09:23:12 AM »

I make my own, leather straps and press studs from eBay.  Press studs both ends, looks neater ;)
Logged
Graham

Socio-Demographic:   Graduate, Coffin Dodger
 Location: N Cambs/S Lincs - UK

David Robinson

  • Member
  • *
  • Offline Offline
  • Posts: 33
Re: Bellows Strap now too Short
« Reply #8 on: June 04, 2025, 10:44:26 AM »

I bought a pair of straps from OG Accordions - https://ogaccordions.com/product/bellows-straps/. Bit of a problem with quality, one was distinctly 'wonky' but Marcus is replacing it and following up with the supplier. I only needed the one at present.

I found it fairly easy to fit, but I have tools and am fairly 'handy'. It needed a hole punched in the right place (takes a bit of careful judgement to get the right tension) and trimming to length. I may fit a 3mm eyelet to the hole later (as was on the original) to avoid the hole stretching.

I'm pleased with the end result as below.

.
Logged
Pokerwork DG, Castagnari Studio GC
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal