Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Strap mounting hardware, etc.  (Read 1267 times)

0 Members and 1 Guest are viewing this topic.

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Strap mounting hardware, etc.
« on: May 17, 2025, 10:00:39 PM »

Hi all, first post, 30+ year player

I have a Hohner 114 (4-stop), that I've always played using only the thumb strap.  I've developed arthritis in my right hand and would like to install a single shoulder strap to relieve some of the related stress on my hand. I can't imagine what has contributed to this issue.. .

Searches, online, for images of the mounting hardware locations, has not turned up much.   And I've spent some time searching through old posts in this forum, but not having much luck there either. And watching videos doesn't reveal a whole lot.  It seems that backside of these instruments isn't as interesting as the keyboard side.

I've learned that there are several different kinds of mounting fixtures; "D" rings, "D-shaped" wire, stamped metal, etc.  The top edge (where the stops are) doesn't leave much room for any kind of hardware, so I think I need to locate the mounting hardware on the edge of the frame closest to my body (as opposed to the top and bottom of the frame).  I've only had the bellows frames off once, years ago, some I'm somewhat concerned about the strength of the frame material and what's behind the prospective mounting location.

It would be much easier to explain if I could post images, but I'm not having much luck in that department either. I'm an experienced website user and generally have no problems figuring out how to post images, but nothing I try seems to work (and I searched through the "Support" forum as well).   FYI: I was trying to post a jpg that is less than 300Kb. .. .

Anyway.... if any of you other 1-row players could post a shot or two of how your straps are connected to the instrument, I'd certainly appreciate seeing them.

If all my questions have been previously addressed (and it's hard to believe they have not), can you drop on a link.

Thanks.
Logged
"It's what you learn, after you know it all, that counts." John Wooden

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Strap mounting hardware, etc.
« Reply #1 on: May 17, 2025, 10:30:04 PM »

I have the best ones as fitted to all my one-rows. They are same as the ones used by Cajun makers.
Single hole fixing, very strong. They will fit on the top of a Hohner HA114 no problemo.
£8 per pair including UK postage.
« Last Edit: May 17, 2025, 10:31:42 PM by rees »
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Strap mounting hardware, etc.
« Reply #2 on: May 17, 2025, 11:10:27 PM »

I’ve been wondering the same… Is there any reason to prefer the D ring type over something more static like this? https://ogaccordions.com/product/pair-of-strap-brackets-for-melodeon-or-accordion-economy/
I have D rings on my HA112C but I find them rattling etc mildly annoying (just enough to make me want to try the other kind)
Logged
Dancing about architecture since 1997

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Strap mounting hardware, etc.
« Reply #3 on: May 17, 2025, 11:43:30 PM »

I’ve been wondering the same… Is there any reason to prefer the D ring type over something more static like this? https://ogaccordions.com/product/pair-of-strap-brackets-for-melodeon-or-accordion-economy/
I have D rings on my HA112C but I find them rattling etc mildly annoying (just enough to make me want to try the other kind)

Those are a bit wide for a 114 body so have to be mounted well on the skew-whiff (to coin a phrase from my old mother).
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Strap mounting hardware, etc.
« Reply #4 on: May 18, 2025, 07:48:42 AM »

I got a couple of those one-screw fittings from Rees and found them to solve the problem very nicely.
Logged
We're all doomed ...

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Strap mounting hardware, etc.
« Reply #5 on: May 18, 2025, 11:29:49 AM »

I’ve been wondering the same… Is there any reason to prefer the D ring type over something more static like this? https://ogaccordions.com/product/pair-of-strap-brackets-for-melodeon-or-accordion-economy/
I have D rings on my HA112C but I find them rattling etc mildly annoying (just enough to make me want to try the other kind)

Those are a bit wide for a 114 body so have to be mounted well on the skew-whiff (to coin a phrase from my old mother).

Ah, yes, they look somehow smaller in the picture!.. At 40mm long they wouldn’t sit at a very agreeable angle on the HA114 case…
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Strap mounting hardware, etc.
« Reply #6 on: May 18, 2025, 12:06:34 PM »

I have the best ones as fitted to all my one-rows. They are same as the ones used by Cajun makers.
Single hole fixing, very strong. They will fit on the top of a Hohner HA114 no problemo.
£8 per pair including UK postage.

Did you drill through the metal corners on the box on the right? I have a Welty one row with metal sheet over the corners, covering where ideally the strap brackets would be… Either way I think I’ll take 2 pairs myself (I’ll PM)!..
Logged
Dancing about architecture since 1997

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Strap mounting hardware, etc.
« Reply #7 on: May 18, 2025, 12:14:35 PM »

Yes, drill through the metal corners.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Strap mounting hardware, etc.
« Reply #8 on: May 18, 2025, 03:54:13 PM »

Around here they are sold as accessories by saddle makers. Quite strong.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: Strap mounting hardware, etc.
« Reply #9 on: May 18, 2025, 07:12:49 PM »

Thanks everyone.  It looks like the "D" ring is the hot set-up.

 I suppose there is an optimum angle with regard to the strap (most likely driven by the body metrics of each player). I don't think I'd like that mount to remain loose (so as to "find it's own center").  Do you all tighten the screw(s) down, or leave the brackets loose enough to swivel?

And wonder, of wonders, my photo DID post... it did not appear right after I posted, but 24 hours later, voilà.

Quote
round here they are sold as accessories by saddle makers.

Quite attractive, as well.
Logged
"It's what you learn, after you know it all, that counts." John Wooden

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: Strap mounting hardware, etc.
« Reply #10 on: May 18, 2025, 07:16:41 PM »

Next up....  STRAPS.

Width?
Length?
Vendors?
Logged
"It's what you learn, after you know it all, that counts." John Wooden

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Strap mounting hardware, etc.
« Reply #11 on: May 18, 2025, 07:29:14 PM »


 I suppose there is an optimum angle with regard to the strap (most likely driven by the body metrics of each player). I don't think I'd like that mount to remain loose (so as to "find it's own center").  Do you all tighten the screw(s) down, or leave the brackets loose enough to swivel?


Initially tighten the screws down then back off half a turn, play the instrument and note the D ring's happy place.
Retighten screws.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: Strap mounting hardware, etc.
« Reply #12 on: May 18, 2025, 07:52:22 PM »

I found this D-ring & Clip at a leather supply outfit.  I'm unclear on the dimensions so I sent this image along for clarification.

I need to know how the 'clip' is fabricated; "A" (which would mount flat), or "B"... not so flat.

Logged
"It's what you learn, after you know it all, that counts." John Wooden

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Strap mounting hardware, etc.
« Reply #13 on: May 18, 2025, 07:59:52 PM »

The answer is A flat.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Strap mounting hardware, etc.
« Reply #14 on: May 19, 2025, 04:20:29 AM »

Quote
The answer is A flat.

This is key information !   (:)
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal