Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Bellows Loosener  (Read 9992 times)

0 Members and 1 Guest are viewing this topic.

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Bellows Loosener
« Reply #20 on: February 09, 2009, 04:29:59 PM »

If it's longevity and exposure to the elements that is a concern with vinyl or other polymers, just look at paper and card stock. 

My concern would be my own exposure to vinyls - and longevity! My other half is currently researching the effects of "endocrine-disturbing" chemicals. Trust me, you don't want to be breathing in some of the stuff that PVC releases into the atmosphere. (Don't buy PVC shower curtains...)  Paper, cloth and cardboard seem just fine to me, thank you.

Robin Harrison

  • Good talker
  • **
  • Offline Offline
  • Posts: 94
Re: Bellows Loosener
« Reply #21 on: February 14, 2009, 03:15:32 PM »

Quote
Has anybody tried hanging a box with stiff bellows up by the bass strap so the bellows are fully extended by the weight of the treble end, Ive a feeling that this may help loosen them but have never tried it.
         Yes...............on some stiff Castagnari bellows. I hung them in a closet for 3 months and also did the stretching exercise too. It helped substantially. They were, of course , good quality bellows. Whether it would work on cheaper one, I don't know.
                Robin
Logged

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Bellows Loosener
« Reply #22 on: February 14, 2009, 07:26:57 PM »

It worked on my Scarlatti finally, when I had the courage to leave it hung for a couple of days.. Thanks all!  :D
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

HallelujahAl

  • Guest
Re: Bellows Loosener
« Reply #23 on: February 22, 2009, 12:13:43 PM »

I put a similar post up a few weeks ago concerning my chinese made melodeon. Lots of advice to hang it etc came back.
I tried hanging it with weights for a few days - not very effective.
So last week I went on holiday in Scotland and took a remote cottage in the shadow of Ben Lawers -played the damn thing for at least two hours every day. I now have muscles like Charles Atlas, and the bellows are still too stiff.

Corollary to the tale however: As soon as I got home yesterday I went straight back to my lovely old Hohner Erica - now I find that I can hardly play the thing 'cos I'm heaving a very soft set of perfectly played in bellows around.  It's going to take time to re-adjust.  So be careful - cheap chinese bellows can seriously mess you up. I've now also gone up a shirt size!

AL
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Bellows Loosener
« Reply #24 on: February 22, 2009, 05:25:44 PM »

I think one of the issues with cheap Chinese boxes is that the reeds are usually unresponsive and need a lot of air to produce a sound, which adds to the difficulty of handling a stiff bellows. I ordered a set of italian reeds that I will fit to the Ariette and these should turn it into a half-decent box.

I too find it a big switch when going back to play on "good" bellows, but not on a negative way. The Chinese box is good for the warm-up part!
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

HallelujahAl

  • Guest
Re: Bellows Loosener
« Reply #25 on: February 23, 2009, 08:02:19 PM »

Quote
I ordered a set of italian reeds that I will fit to the Ariette and these should turn it into a half-decent box.

Now strangely enough that's what I've been thinking about. Not that I actually KNOW how to fit a set of reeds (which probably puts me roughly in the same league as the factory that made this thing in the first place) - but how would I go about working out what to do - what reeds to order etc? And would it be worth it?

AL
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Bellows Loosener
« Reply #26 on: February 23, 2009, 08:20:42 PM »

It will be the second reed transplant I'll do. I replaced reeds from a 1-row 2-voice box with a set I bought from CGM. I'm a pretty handy guy (I used to repair old cameras, and I am good at woodworking, etc) so it was a bit experimental but I managed, as I also had to do some adjustments to the bass reed block to accomodate narrower reedplates, etc. They were helpful in proposing a solution.

The 4-voice reed set I just ordered (Cagnoni macchina) cost me GBP 90 shipping included. I paid CAD 200 for the Ariette, so for roughly CAD 400 I will have a usable cajun-style box!
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

HallelujahAl

  • Guest
Re: Bellows Loosener
« Reply #27 on: March 01, 2009, 10:45:01 AM »

Quote
The 4-voice reed set I just ordered (Cagnoni macchina) cost me GBP 90 shipping included. I paid CAD 200 for the Ariette, so for roughly CAD 400 I will have a usable cajun-style box!

That's really great - CGM is that Charlie Marshall?
AL
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Bellows Loosener
« Reply #28 on: March 01, 2009, 04:49:28 PM »

That's really great - CGM is that Charlie Marshall?
AL
Yes. The sets they sold me are really nice. They offer excellent service.

The MM reeds were factory-tuned dry, I only had to do a little tuning to the L and H sets. The biggest challenge was to modify the reedblocks to accomodate the new reeds, which have  longer reedplates than the originals. I had to cut and extend the MM reedblock, and adjust some of the cavities for other reeds. The original basses had 6 plates, the new set had 5... I had to disable one of the ports.

The box sounds terrific now! And uses a lot less air than with the original reeds.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

HallelujahAl

  • Guest
Re: Bellows Loosener
« Reply #29 on: March 02, 2009, 03:08:19 PM »

Sounds great - I shall be contacing Charlie in the near future!
AL
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Bellows Loosener
« Reply #30 on: March 02, 2009, 08:18:28 PM »

Just remember that replacing reeds may not be a straightforward remove/clean the old wax/place the new/wax operation!

Reed plates come in various shapes, lenghts and thicknesses and the reedblock may not accept the new reed plates without some modification. May not accept them at all! I was surprised to see how different two reeds producing the same note might be so different from one maker to another. The chinese reeds I removed were short and wide, the italians are comparatively narrow and long.

Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal