Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Clearing invisible dust from reeds  (Read 1517 times)

0 Members and 1 Guest are viewing this topic.

Hohner Helen

  • New Starter
  • Offline Offline
  • Posts: 2
Clearing invisible dust from reeds
« on: June 23, 2025, 01:49:59 PM »

Apologies if this is not new news, haven't been on forum very much. A reed on my Hohner Merlin D/G was 'squawking' so best beloved kindly took the reed block out and huffed and puffed but nothing changed. A few days later a puffer for my camera arrived, and had the idea of using that to blow into the reed. Wow! That worked, a beautiful sound resumed. Very pleased. In case this helps anyone else it was a Hurricane Dust Blower.
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Clearing invisible dust from reeds
« Reply #1 on: June 23, 2025, 04:28:06 PM »

Huffing and puffing works in the housing demolition industry, but it's not a good idea for reeds - you're depositing water from your breath on reeds that are liable to rusting.

Glad that a douche-type dust blower worked in this case but they are very weak. If there's serious amount of debris, you're better off with a keyboard-cleaning spray can, but even that does not always work.
Personally, unless it's a clipping sound, if playing fortissimo on that reed does not work, then it's a wax-out job.
If it's a clipping sound (reed misaligned & clips the frame) , I've been told fortissimo might actually break the reed, then for a pull reed it's a wax job straight away; for a push reed a visual inspection and truing up the reed position with a stanley blade may help.
« Last Edit: June 23, 2025, 04:31:59 PM by mChavez »
Logged

Hohner Helen

  • New Starter
  • Offline Offline
  • Posts: 2
Re: Clearing invisible dust from reeds
« Reply #2 on: June 25, 2025, 09:45:16 AM »

Thanks mChavez for your thoughts. I liked the housing demolition analogy! I have to say that more experienced players that I have come across use the huffing technique. At least the atmosphere is dry currently so all should be well. We'd tried the fortissimo technique which usually helps. Relieved the fleck of dust is now gone rather than having to get into work beyond us.
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Clearing invisible dust from reeds
« Reply #3 on: June 26, 2025, 04:31:53 PM »

I have to say that more experienced players

I think the key word here is "players" rather than "experienced"...
If it's nothing serious, a ping with a stanley blade shall do the job. If a ping doesn't help, I struggle to see how huffing & puffing will. Take it to a repairman.

Also, if the box is old, I dread to think what sort of horrible stuff lives in them reed chambers. Unless you're a mycologist, you're better off not getting your mouth or nose anywhere near the blocks. I've seen things inside accordions that have psychologically scarred me for life :-[.
« Last Edit: June 26, 2025, 04:39:30 PM by mChavez »
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Clearing invisible dust from reeds
« Reply #5 on: June 27, 2025, 09:57:02 PM »

Quite often for funny sounding or non sounding reeds, it's sufficient to 'ping' the reed with the blade of a knife or a feeler gauge. For inside reeds you'll need a bit of straight wire, maybe 1.5mm in diameter (look on eBay…lots of wire/rod on there), remove the reed block (if removable) and shine a bright light up into the reed chamber. You can access the 'inside' reed by gently pushing the wire against the tip of the inside reed and so pushing the wire/rod out of the slot, taking the tip of the reed as well. Careful not to actually bend the reed…it's spring steel and designed to flex, but will change shape if you flex it too far. Also watch out for the inside valve. If it all goes wrong you can pop off the reed by pressing the tip of a big flat screw driver inside the chamber and against the top of the reed plate (don't do it this way on bass reeds where the chamber divider is thin wood). You can refit the reed using a regular soldering iron, by melting the wax and pressing the reed back in place. Don't cover it in wax. It doesn't need much to hold the reed in place and the wax stays sticky for a while after you melt it. Running repairs I see often have great gouts of wax, but it's really not necessary.
« Last Edit: June 27, 2025, 09:58:40 PM by Rog »
Logged

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: Clearing invisible dust from reeds
« Reply #6 on: September 14, 2025, 12:12:18 AM »

BUMP

I just picked up a very slightly used 2815 GC, that is generally in excellent physical condition*.  This is my first more-than-one-row instrument.

It was apparently stored for a long period of time, in its origianal cardboard box, and in a climate controlled area; there is virtually no dust behind the grill, and its "breath" still smells like fresh wood.  The bellows are tight, bellows tape looks new, the grille, box and bellows corners are are bright with no surface corrosion. The bass and bellows strap leather is pristine, and the keys and "pokerwork" on the box look new as well, with no wear around the the buttons. 

Now the * bit;

"C" on the C row is sounding only one reed.
"F" on the C row is sounding one reed intermittently.

"A" on the G row is sounding only one reed
"C" on the G row is sounding only one reed.

"G" reed, on the GD bass button is "rattling' (for lack of a better term).
"E" reed, on the EA bass button is rattling.

Sound at 00:10
https://youtube.com/shorts/JdkfTfwNU1E?si=Yzudrhg6C2Sf4_5R

I have not pulled the pins yet. 

Quote
Quite often for funny sounding or non sounding reeds, it's sufficient to 'ping' the reed with the blade of a knife ...

Could you define what you mean by "ping"? 

Thanks of any insight.

Might this be what is going on?
https://youtu.be/yt4I5G6ZxEA?si=qLz3AuGvWBFyzBIk



Logged
"It's what you learn, after you know it all, that counts." John Wooden

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Clearing invisible dust from reeds
« Reply #7 on: September 14, 2025, 07:26:13 AM »

That is indeed how to ping reeds to remove dust etc. It becomes more difficult if it's a pull note as those reeds are on the inside of the block and without removing the reed you can't 'ping' it, but it is usually sufficient to lift the valve and insert a toothpick (or similar) to move the reed and maybe blow down past the pick.

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Clearing invisible dust from reeds
« Reply #8 on: September 14, 2025, 08:28:46 AM »

@Lew

Even if you are a reasonably experienced repairer, you really need to have a box (or two) that you play and a box (or two) that you play with, so don't expect to do both with the same box at the same time.

How old is that Hohner? Is it waxed or pinned reeds? Plastic or leather valves?

Even if cosmetic condition is pristine and it was stored in a museum, if it's old it needs a full overhaul. Wax or leathers don't age well at all.
This thread was about a fully functioning box when a reed stops speaking or starts buzzing. Old boxes have different gremlins inside.
Logged

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Clearing invisible dust from reeds
« Reply #9 on: September 14, 2025, 10:18:32 AM »

A stuck valve can often make a note sound weird, flat, or not at all - its not always the reed. Good luck.- John.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Clearing invisible dust from reeds
« Reply #10 on: September 14, 2025, 10:25:47 AM »

A stuck valve can often make a note sound weird, flat, or not at all - its not always the reed. Good luck.- John.

There's another thing that can cause a rattling sound like a dodgy valve. If the wax is old it can lose its grip on the reedplate and the reedplate itself will vibrate.
« Last Edit: September 14, 2025, 09:48:25 PM by rees »
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Clearing invisible dust from reeds
« Reply #11 on: September 14, 2025, 10:47:24 AM »

And make sure there is a brace between the blocks. All sorts of weird sounds and tunings can be produced by an imperceptibly loose block.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: Clearing invisible dust from reeds
« Reply #12 on: September 14, 2025, 06:28:54 PM »

Thanks friends. Apologies for introducing drift to the original discussion.

I've started a new thread > Hohner 2815 almost new

Having some issue with image file size.

Logged
"It's what you learn, after you know it all, that counts." John Wooden

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: Clearing invisible dust from reeds
« Reply #13 on: September 14, 2025, 09:13:19 PM »

Along the original vein of this discussion...

Given the physical size, weight, and fragility of these instruments, is pulling the reed blocks and shipping them somewhere for tuning a realistic approach?

If so, what precautions would one take to package them?
Logged
"It's what you learn, after you know it all, that counts." John Wooden

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Clearing invisible dust from reeds
« Reply #14 on: September 14, 2025, 09:47:17 PM »

Along the original vein of this discussion...

Given the physical size, weight, and fragility of these instruments, is pulling the reed blocks and shipping them somewhere for tuning a realistic approach?

If so, what precautions would one take to package them?

With good packaging reed blocks can safely be sent by mail or courier.

But, if you want a good tuning job your tuner will want the whole instrument.  If you tune reeds outside the instrument they will change by a small but unpredictable amount when installed in the instrument.  But if you just want the reeds to all be cleared of dust you might just send the blocks.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: Clearing invisible dust from reeds
« Reply #15 on: September 14, 2025, 10:10:26 PM »

Thanks Theo,

I rather anticipated your answer and can understand how anchoring the blocks into the instrument could change pitch resonance.

I'm not having much luck at this point finding a "Lester" on this side of the Atlantic, so just brainstorming for a solution.

I'm a retired mold patternmaker, so the mechanical work on this won't be too daunting; the tuning as well, if I wanted to take up another hobby. But I know my limitations.

I'll open up this 2815 this week, maybe I'll get lucky with de-dusting these reeds.  But having played this box for a few hours last night, non-speaking reeds aside, I can hear that it needs* fine tuning.  Finding the right mechanic is the issue.

* if my InsTuner™ app is accurate.


 

Logged
"It's what you learn, after you know it all, that counts." John Wooden
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal