Hello fellow melodeon enthousiasts,
Although I have hardly posted on the forum before, I've been lurking for a couple of years now and wanted to share something.
The past 4 years I've attended a furniture making school here in Rotterdam, and as my final project I've built a melodeon of my own design. After a couple of nerve-racking days I just got received the news that I'm graduating.
This has been a long project I started 2,5 years ago with initial designs and research, which wouldn't have been possible without you fine people on this forum.
I never found a reason to start a new topic as most of my questions could be answered by searching the older threads, like delving into the notes of ancient craftsmen.
I've also done two internships with Karel van der Leeuw which were of incredible value in the amount of knowledge and skill I gained during those short months.
After putting down a wishlist of what I wanted as features in an "idealized" instrument I started with designing it as a 3D model in Autodesk Fusion 360.
By first fully designing the instrument in 3D I managed to "mostly" avoid nasty surprises during the actual building process.
I got most of my measurements by just looking what worked on the instruments in my collection and copying and adapting those in the CAD program.
As the course I'm attending is focussed on making furniture, the alloted time to build was hardly enough to build a melodeon.
As such I've utilized CAD and CNC machines whereever possible and logical: The soundboard, inlays, and bases of the reed blocks were laser cut; The 2 keyboard, ebony keys, and reed blocks were milled using a CNC machine; the metal grate was cut using a high pressure watercutter; and the whole bass mechanism was printed on a 3D printer.
The reeds have been scavenged from a Bb/Eb Ouverture which I had sitting around. I figured they were still and good shape and it'd be way cheaper than ordering a new set.
During the design process I neglected to take standard bellow sizes into account, so in the end I ordered the bellows custom made from Harmonikas.
As far as materials go: the darker wood for the keyboards is plane, the lighter beige and green-dyed wood is European maple, the treble side key-bars are pear and the keys themselves are ebony. On the inside i've mostly used beech I found in the garbage, Finnish birch plywood, and old reclaimed fine-grained pine for the reed blocks and valves.
The axles and treble grate are made from stainless steel, the metal bars attached to the keys are steel welding wires, and the cloth to cover up the grates are random hankerchiefs found at the charity shop.
The green dye is a water-based dye I got from a luthier shop, The finish on most of the box is Tru-oil gunstock finish, while the ebony keys just got a tiny bit of tung oil.
Most of the instrument has been assembled using pre-made fish glue, which allows for a lot of ajustments during glue-ups and can always be dissolved using water and heat during screw-ups (which happened more often than I'd like to admit.)
I conceived the treble layout by starting with the Bb/Eb 30 key club layout and removing what I deemed unnecessary. As I started with an 8 bass instrument as far as reeds were concerned, I don't know which extra 2 bass-chord pairs I want, I'll take some time to figure that out. I also want to remove the Bb gleichton and change it to a Dutch reversal C/Bb.
For now it'll be a 24x8 LMM box with a 4th button start. I'll take my time during the summer to tune the reeds so it doesn't sound like the horrible old Hohner the reeds came from.
I'm still considering becoming a professional fettler and builder in the future, but for now I'll settle for being an amateur player and builder, and finally making some money after years of being a poor student.
Again, thank you all for the wealth of information.
~ Mazelman