Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: 18 bass box - buttons needed!  (Read 950 times)

0 Members and 1 Guest are viewing this topic.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
18 bass box - buttons needed!
« on: July 06, 2025, 05:02:57 PM »

I'm making an 18 bass box out of an old ClubX.
I'm using some of the bass end gear from an old Verdi 3 piano box and using bike spokes as the rods.
This is just for fun and to see how it sounds and works and to give myself a chance of trying 18 bass without having to buy a Handry!
I've run out of matching buttons. They are the cylindrical ones from broken up Hohner Club 3M boxes and they work really well with threaded brisket spokes. I don't want the ones with the metal backs (I have plenty of those) and I really would prefer the sort of yellowed creamy colour rather than the almost ivory MoP white buttons.
I know these boxes get broken for reeds regularly so I'm hoping there are a few fettlers reading this.
Here's a pic of progress so far. I will fit a capping strip to the 2 long supports with some felt under to keep the rods in the slots.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: 18 bass box - buttons needed!
« Reply #1 on: July 08, 2025, 08:38:33 AM »

Hi, well done for having a go at this. Occasionally thought about doing the same thing, just to try it out. Thought I'd post as noone else has  ;)
On the ends of the pistons I notice you have loops rather than just a flat 'pushing' surface (which is what I normally see in this type of bass machine). Just wondered why you've done it that way.
Also (this is a personal thing but it gives me a chance to air it)… (:) I stopped using hot glue because I find it terrible stuff and not in fact very sticky. It's actually using mechanical properties to stick. This was after I'd 'fixed' bass machine pallets with it and a couple later came adrift (and this also happened on treble pallets) and I had to strip thr bass machine a second time grrr. So now i use reed wax, which is generally what you see on accordions, or hide glue, which is often what you see (especially) in bass machines. Anyway, not a criticism of what you've done, more of an observation. I don't like hot glue…. Sadly I can't help with the buttons.
« Last Edit: July 08, 2025, 08:41:05 AM by Rog »
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: 18 bass box - buttons needed!
« Reply #2 on: July 08, 2025, 11:04:44 AM »

If I can get time, I'll try to have a look today, as I'm almost sure I have some, somewhere. (That's 'somewhere' in my, slightly chaotic, storage systems!)
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: 18 bass box - buttons needed!
« Reply #3 on: July 08, 2025, 12:35:15 PM »

Thanks Winston.
I think the buttons from the red carcass you sent me for the celluloid night be the right ones.

Rog
I've found hot melt glue to be particularly tenacious, partly depending on the temperature of the gun.
However it does add weight to the pallets so on a recent Liliput I did follow your suggestion and used reed wax keep the action fast.
Some of the spokes were a bit convoluted but I have since replaced the worst, taking some spring and delay out of the action.
The hooked ends are there to return the buttons to position as there wasn't a way of adding a stop pin, like in Stradella systems.
I did initially try and modify a small Stradella system mostly to try and operate pallets that were way out of line with the button positions. In the end I reckoned that a couple of guides would help achieve this while adding much more simplicity.
One slightly annoying thing is that I had to shorten the arms that the rods act on to fit in the limited space available so the effort required on the bass notes is noticeably greater than the chords. If it proves to be a problem I'll replace those springs.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: 18 bass box - buttons needed!
« Reply #4 on: July 08, 2025, 02:33:54 PM »

“The hooked ends are there to return the buttons to position as there wasn't a way of adding a stop pin”
Ah, I see what you mean.
I'm probably not using hot glue in the right way. It's come apart too many times for me to conclude it is reliable.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 18 bass box - buttons needed!
« Reply #5 on: July 08, 2025, 04:00:42 PM »

Hot glue definitely needs the right approach to use well. The very cheap glue guns make it more difficult,  there are different grades of glue.  One of the keys to success is getting the glue hot enough.  Better quality guns usually heat up much faster than the very cheap ones. Once you have the right kit then you have to learn how to place the glue where you want it and to avoid getting strands of glue everywhere! Preparing the surface to be glued too, and traces of old glue or wax will make it difficult for the hot glue to adhere securely.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: 18 bass box - buttons needed!
« Reply #6 on: July 09, 2025, 05:28:09 AM »

Indeed, the strands are another problem. I think in the end I found it easier and much faster to use wax and a soldering iron. You can get down into tight spaces etc. So I personally don’t find it a useful adhesive, at least for accordion work.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: 18 bass box - buttons needed!
« Reply #7 on: July 09, 2025, 07:53:14 AM »

Hot melt glue does take little cleaning up. I find no matter how careful I am, there are always fine strands between pallets. Fortunately it takes seconds to roll these up between.my fingers and by now they don't stick to anything.
I once used my backup gun and had trouble getting a good flow and permanent bond. I'm sure it's down to temperature.
It's also bigger than a waxing spoon and reaching the inside row is often tricky when you can't touch the pallet directly. Big club boxes are some of the worst.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: 18 bass box - buttons needed!
« Reply #8 on: July 09, 2025, 08:14:27 AM »

It's horses for courses I guess. I use a fine tipped soldering iron and a wax stick…which i can get into the smallest of gaps. Or put a small lump of wax on the pallet and melt. My point in other posts is that no manufacturer uses hot glue. They use wax mostly, or proper glue. Hot 'glue' isn't really glue, it's melted plastic with some resin or something to make it 'sticky'. But it goes brittle and falls off if it has't got a good grip. And even on rough surfaces it eventually gives up (i've used it to make various things…a plywood box, a bellows armature, a bass machine rack..and they all fell apart after some roughish use. And then I had some pallets on a PA come adrift, which was the final straw).
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal