Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Needle Files  (Read 766 times)

0 Members and 1 Guest are viewing this topic.

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Needle Files
« on: July 12, 2025, 07:33:32 AM »

I have purchased Vallorbe Needle Files, I have number 2, But it's slippery.
maybe rough is better? but what number ?  Or could you recommend a good file for tuning reeds?
I have bought cheap files, they are rough, but filing also leaves a rough mark.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Needle Files
« Reply #1 on: July 12, 2025, 08:27:22 AM »

Vallorbe number 1 is very good for final tuning, I have used them a lot. If you need to change pitch by more than say 10 cents then something that cuts faster can help,  but you have to be very careful to not remove too much metal.  For this I like Vallorbe triangular file that is made for sharpening saw teeth. I get mine from Axminster tools.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Needle Files
« Reply #2 on: July 12, 2025, 08:30:06 AM »

I second saw files.

Vallorbe's always a good choice, but Bahco are second best, sometimes at a fraction of the price.
Don't buy cheap/noname files unless you get kicks out of wasting money.
« Last Edit: July 12, 2025, 08:34:21 AM by mChavez »
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Needle Files
« Reply #3 on: July 12, 2025, 10:22:31 AM »

Vallorbe number 1 is very good for final tuning, I have used them a lot. If you need to change pitch by more than say 10 cents then something that cuts faster can help,  but you have to be very careful to not remove too much metal.  For this I like Vallorbe triangular file that is made for sharpening saw teeth. I get mine from Axminster tools.

thanks, I'll see what I can find here,
I tried to pay Axminster tools, but something went wrong. ::)
Logged

Jerry in NZ

  • Member
  • *
  • Offline Offline
  • Posts: 13
Re: Needle Files
« Reply #4 on: July 13, 2025, 07:34:14 AM »

Particularly on somewhat hard materials, you will find that a coarse file will skid, whereas a finer one will cut. I have a set of No. 4 cut Vallorbe needle files, and also several No. 6 cut. They are a delight to use, although limited, of course, to fine work, where the amount of material to be removed is very small. I would call a No. 2 cut needle file a fairly coarse 'roughing' file. I'm out of touch with UK suppliers, but I think Shesto or Cousins might be worth trying, along with any jewellers' suppliers you can find.
Logged

Sebastian Trudgian

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 124
  • DG Pokerworks and also play Irish Whistle/Flute
Re: Needle Files
« Reply #5 on: August 18, 2025, 12:36:13 PM »

Vallorbe number 1 is very good for final tuning, I have used them a lot. If you need to change pitch by more than say 10 cents then something that cuts faster can help,  but you have to be very careful to not remove too much metal.  For this I like Vallorbe triangular file that is made for sharpening saw teeth. I get mine from Axminster tools.

Hi,

I'm trying to learn how to tune my melodeons and coincidentally looking for a good file.

Apologies I can't quite work out which one the "number 1" is.

Would someone mind very kindly checking this link and letting me know which one it is (or which one the closest is to the "number 1" type)?

Thanks for your help,

https://www.axminstertools.com/instantsearch/result/?q=Vallorbe%20file
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Needle Files
« Reply #6 on: August 18, 2025, 04:36:50 PM »

I think you will need to put the question to the people at Axminster,   I can’t see enough information on their website.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Sebastian Trudgian

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 124
  • DG Pokerworks and also play Irish Whistle/Flute
Re: Needle Files
« Reply #7 on: August 18, 2025, 05:26:07 PM »

Great thanks Theo, I will do!
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal