Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: How far can a reed be retuned and still work OK?  (Read 1624 times)

0 Members and 1 Guest are viewing this topic.

Peter Furness

  • New Starter
  • Offline Offline
  • Posts: 3
How far can a reed be retuned and still work OK?
« on: July 15, 2025, 10:19:12 PM »

I'm renovating an old Hohner Club melodeon.  Several of the reeds need replacing.  Hohner sell reed plates of the right size, but not the combination of notes I need.
I've read several discussions on tuning melodeon reeds, but only in the context of fine adjustment.  If I get a reed that's a couple of tones away from the note I need, will it be possible to re-tune it by that much and still have an acceptable reed?  What are the limits of re-tuning?
And is it better to get a reed with the intention of re-tuning the note up, or down?
If down, is it best done by scraping the base or adding a blob of solder at the tip?
Apologies if the answers are obvious, but I'm a newbie.

Incidentally, maybe Hohner do sell reeds with the notes I want, but I find it very difficult to navigate this bit of their web shop.  Plates are grouped by size, but several groups are the same size.  (Why?)  Then in each group the available pairs of notes are listed in what looks like random order!  Any tips on how to find what I need?

Peter
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How far can a reed be retuned and still work OK?
« Reply #1 on: July 16, 2025, 12:02:21 AM »

How far can you tune a reed?  It all depends on the reed.  In most cases, if you are careful you can go up or down by a semitone.  More than that is sometimes possible but you need a bit of experience to judge what you can get away with.  Taking the pitch lower by tip loading with solder has the advantage of being reversible. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: How far can a reed be retuned and still work OK?
« Reply #2 on: July 16, 2025, 07:36:52 AM »

Any tips on how to find what I need?

You are likely to have much better chances of success if you ask the folks on this forum instead of the official Hohner shop  ;)
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: How far can a reed be retuned and still work OK?
« Reply #3 on: July 16, 2025, 10:31:45 AM »

If you can get your hands on an old piano accordion (preferably a Hohner), you can take the reeds out of that and use them. For instance if you need a g/a combination, you use the g reed and sharpen one side by a tone, or the a reed and flatten by a tone, of the G# reed and flatten one side and sharpen the other. The world is full of old accordions. I get offered them weekly and advise the owners to give them to a charity shop, or sell them on eBay/Gumtree. So my advice is to look around and get (say) an old Verdi or similar. Don't pay anymore than £40 (or nearish to that), and you can use the reeds from that, and experiment with retuning reeds.
Also you can use the bellows to make some tuning bellows, which are essential when retuning reeds.
Here's an example (most of the prices on eBay are ridiculous and nobody in their right mind is going to pay over £100 for an old 1930s PA unless it's been restored..and even then the keyboards always suck on old PAs).
https://ebay.us/m/Sih3s0
« Last Edit: July 16, 2025, 12:27:18 PM by Rog »
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: How far can a reed be retuned and still work OK?
« Reply #4 on: July 16, 2025, 12:50:34 PM »

You mention several of the reeds need replacing. What's wrong with them ??
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: How far can a reed be retuned and still work OK?
« Reply #5 on: July 16, 2025, 01:01:45 PM »

"https://ebay.us/m/Sih3s0"

That would be a great donor box, over 120 treble reeds to play with! And that's before you even start on the bass end.

How much are new reeds again?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: How far can a reed be retuned and still work OK?
« Reply #6 on: July 16, 2025, 02:45:28 PM »

On a 120 bass typically it will have 2 reed blocks with 24 reeds a piece (12 on each side) and possibly a third half block (or they are laid flat), which would make it 60 plates (so, yes, 120 actual reeds).
The treble side is where you'd harvest the reeds. These Hohner instruments appear all the time and often go in a skip. For a modest outlay you can get all you need. Plus on the old Italian boxes the reeds are often hand finished.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: How far can a reed be retuned and still work OK?
« Reply #7 on: July 16, 2025, 04:59:07 PM »

I meant the treble end, Rog. Three voice and 42 keys.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: How far can a reed be retuned and still work OK?
« Reply #8 on: July 16, 2025, 09:45:22 PM »


   I always stop when my file starts to hit the rivet 😂

   wrt musical distance - i've had good quality (mostly Binci) reeds tuned by 2 semi-tones. But they don't retain the same tone as the other reads in the set.  There is also the issue of the resonating chamber. If the reed not being moved, then that needs to be adjusted too
« Last Edit: July 16, 2025, 09:49:14 PM by Chris Ryall »
Logged
  _       _    _      _ 

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: How far can a reed be retuned and still work OK?
« Reply #9 on: July 17, 2025, 01:22:30 PM »

I meant the treble end, Rog. Three voice and 42 keys.
You did indeed. I'll leave my post there to remind me to read other posts properly… and it is indeed a shed load of reeds. I have boxes of them…

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: How far can a reed be retuned and still work OK?
« Reply #10 on: July 17, 2025, 08:41:50 PM »

I meant the treble end, Rog. Three voice and 42 keys.
You did indeed. I'll leave my post there to remind me to read other posts properly… and it is indeed a shed load of reeds. I have boxes of them…

Rog, do you have any sets of Catraro reeds? These were older reeds, longer scale, that are incredibly responsive with a very wide, dynamic range. I've heard that someone has started producing reeds under the same name recently (can't rememeber who) but I doubt they are the same.
Logged
C#/D player

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: How far can a reed be retuned and still work OK?
« Reply #11 on: July 17, 2025, 10:37:23 PM »

I don't think so. Not a maker I have spotted.

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: How far can a reed be retuned and still work OK?
« Reply #12 on: July 18, 2025, 08:59:02 AM »

@mselic
There's an (incomplete) set of PA Catraro reeds on reverb at Liberty Bellows. Very pricey to import into UK but is just moderately overpriced for US market.
Never heard them in person, but if Richard Galliano swears by them, I'll take his word for it.

Imho, by far the best value for money is offered by early (50s, very start of 60s) Hohner Artiste reeds, and they usually can be raised by at least a tone (sometimes you can push 3 semitones if you're careful). The early ones were close to what's considered AM quality these days. The ones that followed later were comparable to decent TAMs at best, but they still have great timbre and are miles & miles ahead of T- and H-plates quality wise.
You want to buy a smashed 1950s Morino to get the best unisonoric ones. Morino Club and some Overtures had decent quality bisonoric Artistes in C-F, but they are not quite as mindblowing as the ones sourced from unisonoric Morinos.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: How far can a reed be retuned and still work OK?
« Reply #13 on: July 18, 2025, 02:42:57 PM »

Thanks, Chavez. Yes, I’m aware of the (incomplete) set that Liberty Bellows is selling, and I agree that it’s overpriced for what it is. The set that I have must have come out of a similar accordion as the blocks are identical to the ones in their photo.

Regarding re-tuning reeds, in most cases you can go at *least* a semitone, very often a whole tone, and in some cases - like the higher reeds that tend to have more material at the base of the tongue - you can actually lower the pitch by several semitones without compromising the integrating or performance of the reed. I’ve also pushed some bigger (lower pitched) reeds farther than you’d think you can, but you potentially run into the risk of performance issues under hard pressure if you push it too far.
Logged
C#/D player

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: How far can a reed be retuned and still work OK?
« Reply #14 on: July 18, 2025, 06:10:08 PM »

The set that I have must have come out of a similar accordion as the blocks are identical to the ones in their photo.

Titano Cosmopolitan most likely.

Are you planning to do anything with your set? If I ever came across a set of Catraros, I'd build a hromka with them  ;). Even an incomplete set might be enough.
Are they as good as folks say they are?
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: How far can a reed be retuned and still work OK?
« Reply #15 on: July 18, 2025, 07:04:26 PM »

Mselic….yes your description matches my experience. I have pushed reeds a long way in each direction, and occasionally done it just to see how far i can go, though they sometimes become unstable.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: How far can a reed be retuned and still work OK?
« Reply #16 on: July 19, 2025, 05:37:11 PM »

Chavez - the Catraro reeds that I have are indeed excellent. I’ve already used quite a few of them to make a diatonic set.
Logged
C#/D player

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: How far can a reed be retuned and still work OK?
« Reply #17 on: July 19, 2025, 09:43:32 PM »

I was missing a low C bass reed from the tiny Stradella system in a Lucia CBA.
I struggled to find a replacement, but in the magic bucket I did find a C an octave higher that was a perfect fit size wise. I wondered if I could weight it with solder. Amazingly it did work and responds very well.
So with some bass reeds an octave is achievable!
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: How far can a reed be retuned and still work OK?
« Reply #18 on: July 21, 2025, 09:59:47 PM »

'Magic bucket'…hahaha. I enlisted my better half one winter's afternoon when the garden was out of bounds and dark….she sorted my many hundreds of reeds into pitch bins (two large drawers compartmentalised). This is for the unisoric reeds. Also I have diatonic reeds sorted by pitch pairs and in labelled bags. It takes the heat out of finding reeds for recycling.

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: How far can a reed be retuned and still work OK?
« Reply #19 on: August 11, 2025, 07:22:21 AM »

I have succesfully tuned up a reed on the bass side of my Castagnari a semitone (it had a minor triad where a major is supposed to be), I think that's the limit upwards. Downward there's far more leeway; if you add some solder to the tip of the reed it may go down 6 semitones, I found. It may become a bit sluggish in response.
I've used old piano accordion reeds for replacing the 'gleichton' in a Hohner Club with two different tones.
I agree with the advice posted here: buy and old piano accordion and experiment.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal