Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner 1140 conversion to 3 voice?  (Read 642 times)

0 Members and 1 Guest are viewing this topic.

rileyismycopilot

  • Member
  • *
  • Offline Offline
  • Posts: 27
Hohner 1140 conversion to 3 voice?
« on: July 27, 2025, 11:33:11 PM »

Hi folks,

A little Hohner 1140 / 1040 (which one is correct?!) with 3 voice MMM on the right hand would certainly be a dream box of mine, sound wise and feel-wise.

Is it doable?
Or would it involve a bit more work than just drilling a few holes, sticking a Pokerwork stand up block and adding longer pallets?

Cheers,
Victor
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hohner 1140 conversion to 3 voice?
« Reply #1 on: July 28, 2025, 12:08:28 AM »

It is doable, I have a 1040 in G with three low voices, and I love it!
If I remember correctly, there's not enough room to stand a third block up straight, for contacting the bass block. Mine's mounted at an angle, a bit like the flying blocks on the Preciosa. I thought I had a video of it, but cannot find it at the moment, sorry.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Online Online
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner 1140 conversion to 3 voice?
« Reply #2 on: July 28, 2025, 07:56:20 AM »

I have a LMMH one that I'm selling.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Hohner 1140 conversion to 3 voice?
« Reply #3 on: July 28, 2025, 05:07:30 PM »

I too successfully converted one of them to 4 voice LMMM in C -no stop-,  bit of wood work new treble mech. pallets  etc. needed but not a big deal.you may have to the check the bellow & make sure there are enough folds for standing up blocks.bass side will need some wood work too..of course you can go Cajun style 2 flat 1 or 2 standing up reed if you wish.
mind you the box i have is older wooden body, size of the box was/is  same as 2 row poker work, not the Vienna type smaller new ones & still room for 2 more reeds to make it 6 voice  (:)   
Pete and mr Kay.A  also converted one of them I think.   
Logged

rileyismycopilot

  • Member
  • *
  • Offline Offline
  • Posts: 27
Re: Hohner 1140 conversion to 3 voice?
« Reply #4 on: July 28, 2025, 11:58:34 PM »

Impressive job, y'all.

My idea was to remove one of the existing flat blocks, and replace it with a Pokerwork stand up reed block.
Ideally, the leftover flat block would be tuned to M, and lay at the bottom (keyboard) side, while the stand up block would lay at the upper side and hold the M-M+ reeds.

Would that sound possible without hitting the bass block (which IIRC is quite tall on those)?
Would it be possible to keep the existing holes in the fondo?

Thanks!
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Online Online
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner 1140 conversion to 3 voice?
« Reply #5 on: July 29, 2025, 11:44:16 AM »

I took some photos of my conversion and I see I changed the bass end to flat mounted. Probably to clear the treble blocks.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

rileyismycopilot

  • Member
  • *
  • Offline Offline
  • Posts: 27
Re: Hohner 1140 conversion to 3 voice?
« Reply #6 on: August 02, 2025, 12:48:07 AM »

I took some photos of my conversion and I see I changed the bass end to flat mounted. Probably to clear the treble blocks.
Pete, this kind of surgery is not for the faint of heart but I'm glad to know it can be done.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal