Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: What glue?  (Read 1094 times)

0 Members and 1 Guest are viewing this topic.

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
What glue?
« on: July 28, 2025, 07:22:19 AM »

I would like to ask for an opinion, ?? which glue would be best for gluing pallets?
Pallets are large, and perhaps heavy, I think they require strong glue,,
Alternatives, reeds wax, (it might not be good for this) ?
glue gun? (Plastic)
I've also thought about a small drop of epoxy resin?
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: What glue?
« Reply #1 on: July 28, 2025, 08:37:48 AM »

Pallet-to-lever?

Reed wax and hot melt plastic (glue gun) are the usual go-tos. I'd go with plastic out of these two - I don't see why you'd want wax there, but that's my imho.

FWIW, if you're feeling adventurous, three of my most recent boxes are running on a drop of bookbinding PVA. Seems to work a dream, very easy to apply.
You keep the pallet on the fondo, the lever is sprung up and inserted into its slot, so the pallet is perfectly aligned in all dimensions. Put a small, half buckwheat-sized, or slightly less, drop of glue over the lever where it's resting in the slot. The glue will make its way 1/3 or 1/2 into the slot's depth by itself. Let it dry, and Bob's your uncle. 
The resulting joint has a very slight amount of flexibility, which in my view is also a big bonus (essentially, the pallet has some degree of self-alignment, albeit not as much as with a leather linkage set-up like you see on old bandonions and high end Hohners).

For a 2- or 3-row instrument you can align all pallets on the fondo, install all the levers and then put the bookbinding drops into the slots. Job done. Quick, easy and excellent results.

A bit of a bugger to clean up if you have to re-fit the pallet to the lever (compared to hot melt plastic), but only marginally - any glue will be a bit of a bugger to remove from a tight slot.

Absolutely no need to go for epoxy there, and I dread to think of having to re-fit the pallet.
« Last Edit: July 28, 2025, 08:50:15 AM by mChavez »
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: What glue?
« Reply #2 on: July 28, 2025, 08:48:30 AM »

Bookbinding glue also remains a little flexible.
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: What glue?
« Reply #3 on: July 28, 2025, 08:51:52 AM »

Bookbinding glue also remains a little flexible.

Apologies - I've edited the post about 10 times, adding my thoughts to it. Morning coffee hasn't fully kicked in yet  ;D

Yes, flexible is there, as long as you don't put too much glue (I just use the absolute minimum I can get away with), and flexible is good.
« Last Edit: July 28, 2025, 08:53:25 AM by mChavez »
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: What glue?
« Reply #4 on: July 28, 2025, 09:28:53 AM »

Thank you :||:
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: What glue?
« Reply #5 on: July 28, 2025, 09:59:53 AM »


  don't go for the cheaper hot melt products. I did that once  and the pallet fell off halfway through a holiday France. It was inconvenient!
Logged
  _       _    _      _ 

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: What glue?
« Reply #6 on: July 29, 2025, 06:19:37 PM »

<warning hobby horse vent>
You never see hot glue used by manufacturers. Older accordions use either reed wax or animal glue to secure pallets (except Cajun boxes which sometimes use screws or nails). Personally i can't see what's wrong with reed wax…it's super quick and easily undoable and much easier to use in tight spots than hot glue guns. Hot glue is the 'go to' on here.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: What glue?
« Reply #7 on: July 29, 2025, 06:45:50 PM »

I also prefer reed wax, partly because it doesn't need any particular skill to make a reasonably tidy job!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Paul Bryan

  • Member
  • *
  • Offline Offline
  • Posts: 37
Re: What glue?
« Reply #8 on: August 01, 2025, 02:11:23 PM »

on emmanuel paraselle 1 row melodeons pallet to leaver is bonded with clear epoxy
Logged

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: What glue?
« Reply #9 on: August 01, 2025, 02:29:05 PM »

wood glue works fine for me, disc of fabric on top -as used older hohners- 2/3/4 voice boxes works just fine & you can easily revers it if needed.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: What glue?
« Reply #10 on: August 01, 2025, 06:30:52 PM »

Quote
on emmanuel paraselle 1 row melodeons pallet to leaver is bonded with clear epoxy

Thanks for this Paul, you answered a question I meant to ask !

On Hohner-type pallets, I've had good luck with wood glue reinforced with a small fabric piece, as well as with hot-melt glue. However for exposed pallets as often found on 1-rows, I think something more sturdy like screws or epoxy(as I now know) is better.
Logged

2rightfeet

  • Good talker
  • **
  • Offline Offline
  • Posts: 76
Re: What glue?
« Reply #11 on: August 14, 2025, 09:17:17 PM »

(Just back from holiday). Knowing the chemistry a bit, I shudder at the thought of using epoxy to bond wood. It's wonderful stuff for bonding rigid substrates (my repaired kitchen items withstand years of the dishwasher) but it has very little flexibility. In passing, not relevant here, its UV resistance is also crap. Otherwise wonderful stuff.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal