Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Unknown C#/D bass layout  (Read 1189 times)

0 Members and 1 Guest are viewing this topic.

Joe G

  • Member
  • *
  • Offline Offline
  • Posts: 7
Unknown C#/D bass layout
« on: August 10, 2025, 11:52:22 AM »

Hi all,

I’ve been lured out of lurking to posting, by my curiosity. I have a C#/D Erica, and the bass layout, different from those on the layout section here on melnet, is as follows:

(Squeeze|Draw), (+) = major, (-) = minor chord.
<— chin … floor —>

(C#|G#) ( + | + ) ( D | A ) ( + | + )

( F | A#) ( + |  - ) (G#|F#) ( + | + )

———————
   BELLOWS
———————

Treble is as standard.

My question is probably not really answerable in a way I’ll like - I suspect it’s just down to the preferences and repertoire of the previous owner. However, has anyone come across this layout before? Can anyone see the thinking behind it? It’s a bit of an enigma to me.

Logged

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Unknown C#/D bass layout
« Reply #1 on: August 10, 2025, 12:44:41 PM »

Looks like a lovely set of basses for playing it in the key of C#.

Compare with:
https://forum.melodeon.net/files/site/CC21hohnerbass.gif

Everything matches except you're a semitone sharper. I guess, are you sure it's a C#/D? Regardless it has a bass layout for playing in the manner of C/C# boxes, which isn't really something many people do or recommend any more.

I hope this info is helpful.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Unknown C#/D bass layout
« Reply #2 on: August 10, 2025, 01:35:39 PM »

As Gina said/hinted, it's the standard layout Hohner used for their semitone boxes. Except Hohner did not make them in C#/D, so yes, it was someone's choice to adopt/adapt their layout for this box.

It's not too difficult to change this layout to the more common/useful one (similar to A/D) using the existing reeds.
Logged

Joe G

  • Member
  • *
  • Offline Offline
  • Posts: 7
Re: Unknown C#/D bass layout
« Reply #3 on: August 10, 2025, 09:40:11 PM »

Thanks for the info, both, that’s useful.

Looks like a lovely set of basses for playing it in the key of C#.

Good point - I’d actually dismissed the idea that someone would have wanted to play in C#, but I’m guilty of narrow minded thinking there!

Compare with:
https://forum.melodeon.net/files/site/CC21hohnerbass.gif

Everything matches except you're a semitone sharper. I guess, are you sure it's a C#/D? Regardless it has a bass layout for playing in the manner of C/C# boxes, which isn't really something many people do or recommend any more.

It is a C#/D on the treble side. I’ll have to read up on C/C# for ideas, although I’m sure there’s a good reason it’s not recommended. I’ve been thinking of maybe using the reed blocks for a C#/D/G of some sort, but I’d at least like to explore the instrument as it is first.

As Gina said/hinted, it's the standard layout Hohner used for their semitone boxes. Except Hohner did not make them in C#/D, so yes, it was someone's choice to adopt/adapt their layout for this box.

It's not too difficult to change this layout to the more common/useful one (similar to A/D) using the existing reeds.

That might be a good route to go if it’s reasonably straightforward. It sounds like a previous owner had a specific niche in mind!
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Unknown C#/D bass layout
« Reply #4 on: August 10, 2025, 10:07:15 PM »

These days, C/C# boxes (in Irish music, anyhow) are primarily used as an ‘Eflat box’ for B/C players, allowing them to play everything one semitone higher, which can give the music a brighter feel and sound. Sometimes C#/D players will play C/C# boxes and everything comes out a semitone lower; you’ll occasionally find recordings where C#/D players have done this and it can give the music a slightly mellower tone.
Logged
C#/D player

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Unknown C#/D bass layout
« Reply #5 on: August 10, 2025, 11:08:46 PM »

It's also possible to play a C/C# outside-in, meaning mostly on the C row and using the odd inside-row note for accidentals (basically same idea as B/C except the main (C) row is out rather than in). Or, to look at it differently, not unlike D/C# where the 'home row' is outside and odd notes taken from the inside row.

But in any event, it's a C#/D you have, right ?
Logged

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Unknown C#/D bass layout
« Reply #6 on: August 10, 2025, 11:13:45 PM »

Photographs of the internal reeds would give indication as to whether or not your reedset is original. I suspect that it is.
I doubt that someone would go to the trouble of re-configuring this layout.
It's certainly the older style of Hohner bass/chord layout and would be exactly how they would configure them on a C sharp/D accordion.
I've owned several older C/C sharp Ericas and two D/D sharp Ericas, all original with same pattern 'layouts' but never a C sharp/D.
...Just maybe they made an occasional one?
 

Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Unknown C#/D bass layout
« Reply #7 on: August 11, 2025, 03:41:08 PM »

I'm surprised that you all seem mystified. Surely this instrument was originally in C/C#. Someone retuned the treble reeds to C#/D, or installed new reeds, and either didn't think it was worth reconfiguring the bass side because they had no intention of using the basses, or possibly got interrupted halfway through the project.

If you, Joe, want to keep the instrument and use the basses, you'll have to get them reconfigured to a layout that is useful for C#/D.

   

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Unknown C#/D bass layout
« Reply #8 on: August 11, 2025, 04:00:22 PM »

Quote
I'm surprised that you all seem mystified.

It must be contagious, then !  ;D

Just to clarify, based on info in his initial posting, Joe's bass reeds are currently in 'Old Hohner' configuration for C#/D, -not- C/C#.
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Unknown C#/D bass layout
« Reply #9 on: August 11, 2025, 04:24:21 PM »

Quote
I'm surprised that you all seem mystified.

It must be contagious, then !  ;D

Just to clarify, based on info in his initial posting, Joe's bass reeds are currently in 'Old Hohner' configuration for C#/D, -not- C/C#.

OK, sorry, didn't look closely enough. Take no notice.

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Unknown C#/D bass layout
« Reply #10 on: August 11, 2025, 04:42:40 PM »

Ah, I knew I had seen it somewhere! The catalog page pictures in this thread show that tuning in C#/D was not offered at the time (1958), only B/C and C/C# were available.

https://forum.melodeon.net/index.php?topic=28448.0

I have 2 Hohner in C#/D. Their keyboards are stamped B-C and AD, so likely not originals.

Admittedly this is anecdotal information. Maybe C#/D became available later ??
Logged

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Unknown C#/D bass layout
« Reply #11 on: August 11, 2025, 08:48:56 PM »

Nope to the earlier post in this thread, but this is not an original old style C/Csharp layout.
That's because three of the bass/chord pairs would have been set up for the C row. C/G, E/A and G/F. (tune these up a semitone to get the poster's tuning.)
That's how Hohner set them up and is not so here.
As I said, without seeing the state of the internals, it's difficult to assess.

« Last Edit: August 11, 2025, 08:54:41 PM by gettabettabox »
Logged

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Unknown C#/D bass layout
« Reply #12 on: August 11, 2025, 09:02:03 PM »

As suggested by others here, the existing reeds can be re-tuned to give a more useful set up for playing in today's C sharp/D style, 3 pairs need to be modified, two of them being fairly simple.
Enjoy your new box!
Logged

Joe G

  • Member
  • *
  • Offline Offline
  • Posts: 7
Re: Unknown C#/D bass layout
« Reply #13 on: August 14, 2025, 01:46:29 PM »

Thanks everyone for all the info on this thread!

I apologise for my slowness to respond. To make up for it, I have some glamour shots of my reeds! I hope this helps with identification. As a very-non-expert they look to me like they'd be original reeds, and they're stamped CIS D on treble and bass blocks, which I think is C#D - is that correct? However, the treble blocks have both a D scribbled out and what looks like it would maybe have been a C before the CIS scratched off. Curiouser and curiouser.

This box had a quality control tag with it, which could have been for a conversion, maybe? Did they normally come with those tags as standard?

Thanks again for all the input :)

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Unknown C#/D bass layout
« Reply #14 on: August 14, 2025, 02:06:25 PM »

Looks like a standard set of C#D blocks.  Hohner started to use those tags in the very late 1990, or early 2000s at about the time they were moving production to China. It was also about this time that they (finally) added C#D to their standard range.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Joe G

  • Member
  • *
  • Offline Offline
  • Posts: 7
Re: Unknown C#/D bass layout
« Reply #15 on: August 14, 2025, 02:47:07 PM »

Looks like a standard set of C#D blocks.  Hohner started to use those tags in the very late 1990, or early 2000s at about the time they were moving production to China. It was also about this time that they (finally) added C#D to their standard range.

Thanks Theo. I'm slightly disappointed it's not an oddity, but it's good to have the info! :) It must just be a very late German box. The keyboard has the usual made in Germany label.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal