Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: 1.5 row  (Read 1203 times)

0 Members and 1 Guest are viewing this topic.

CAB

  • Mass Debater
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1147
    • Somerset Russets Village Band
1.5 row
« on: August 13, 2025, 10:51:06 AM »

I've often wondered why there aren't more one and a half row melodeons around.

2 row or 2.5 row 4th apart boxes involve compromises - in the sense that you have to decide on your low notes/accidentals/reversals - whereas semitone instruments are completely chromatic, at least on the right hand.

A 1.5 row, say in D with C nats, F nats and G sharps on the half row would make a nice lightweight manoeuvrable melodeon on which you could play most of the common repertoire.  This would be ideal in, for example an Irish session - where I tend to get dirty looks as soon as I use my left hand anyway.   ;)   It would also do away with the curse of getting caught between the many alternative fingerings available to an inveterate row-crosser like me on a bigger box.

Of course the clever 1 row player smartly avoids the notes s/he doesn't have - but why should you have to?  I'm much too pedantic to go down that route.

I think I've seen one such instrument on this forum - Howard???  Otherwise, organetti seem to be the closest.

Any thoughts?  Or is it just me?   ;D
« Last Edit: August 13, 2025, 03:38:13 PM by CAB »
Logged
Pas de lieu Rhone que nous

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: 1.5 row
« Reply #1 on: August 13, 2025, 11:40:30 AM »


  The Calabrian organetto (for tarantella etc) commonly has 1-row+2 or 1-row+4 layout, with either two or four basses.

  They aren't accidental, as that isn't very useful on restricted spoon-bass kit. They are the notes of the main row reversed>

   So across that octave you have every note in every direction.   I haven't personally seen 1-row+5, but they probably exist.
Logged
  _       _    _      _ 

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: 1.5 row
« Reply #2 on: August 13, 2025, 11:43:48 AM »

Yeah, most 1.5 rows you encounter in the wild are all reversals, rather than extra notes. I've always thought that was a bit odd. But it makes sense from a 'obviously match the chords' perspective, but, compromising on this is exactly what semitone boxes do, so why not here too, for some reason, lol.

I can't say I'd particularly want to play every tune like this, but you can't argue it wouldn't be possible. One wonders how much fun would be had, though - after all you can give this a go now on your two row box by just insisting on using the outside row and picking up the notes outside of it as needed. If you find you can live like that, then, surely this is viable?
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: 1.5 row
« Reply #3 on: August 13, 2025, 12:11:21 PM »

The problem is where do you put all the reeds.
Typically a pokerwork type box has space for 42 reed plates, 40 on a 4-stop.
With a lot of work and cunning you can get 63 or 60, 3 voice 2-row or 6 voice one-row leaving the button layout pretty standard. This means the now larger pallets close in the same positions, covering 3 or 6 reed holes instead of 2 or 4.
So a 3 voice 1.5 row would be easy, but what's the point? It's basically a 2 row with half a row blanked off.
A 4 voice 1.5 row is difficult, you can make a box using 60 reeds by placing them parallel in a 6x10 format but his won't achieve any extra buttons. Any further notes must fit in the length of the existing reedblocks. So maybe you could squeeze the reeds together to get up to 12, maybe 13 in a new block that takes up (maybe marginally more) the space of a standard block.
The downside of this is you can no longer have slides, as the closed position parking space for the hole on the slide is smaller than the hole, so air will always pass through.
Now you have to reposition the mechanism so some levers are shorter to work on the half row, and divert the previously straight levers around the new buttons on the half row. Perhaps one extra button at each end would work better?
I'm assuming you want the sound and throwaroundabilility of a 4 stop otherwise, what's the point?
Or you can make a bigger carcass to accommodate the extra gubbins but then you've got a bigger and less handy box.
Everything is doable, but is the tradeoff worth it?
I've based all my comments on existing boxes, as it's easier to understand the volumes and movements but making box from scratch would have the same limitations.
Having said all that I might try and build one.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: 1.5 row
« Reply #4 on: August 13, 2025, 12:15:03 PM »

Irish-American boxes from the 1930-50s (such as Baldoni-Bartoli or Walters) or more recent Québec ones (like Sag'né or Bouchard) are probably what you have in mind. Typically in D with a partial C# row.

Lars Hansen posted pictures and a video of a Baldoni he restored on Facebook just yesterday, and Howard Mitchell has a Sag'né I think, so maybe they could comment further.
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: 1.5 row
« Reply #5 on: August 13, 2025, 12:21:14 PM »

Here's the one I just tuned: https://youtu.be/Iad9hneXAjI?si=vms426pFVZQMxeR1

And yes, you can surely have a sliding mechanism - this one goes from 4 to 6 voice on the couplers despite the reeds being slightly closer together than on a 'regular' reedblock.

It's quite nice to have the F, C, G#, Bb etc on the partial C#-row, but I actually find that I have just as much fun playing on a 10 key single row 'playing around' the accidentals. But it's nice to have when you do need them.

Logged

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: 1.5 row
« Reply #6 on: August 13, 2025, 01:22:48 PM »

The ones I've seen used in Italy have been reversals on the half row which enabled them to fly around the keyboard at extraordinary speed.
They also had what appeared to be long bellows, which one player looped around a friend and started dancing with her!
« Last Edit: August 13, 2025, 01:24:55 PM by Thrupenny Bit »
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: 1.5 row
« Reply #7 on: August 13, 2025, 02:06:48 PM »


   Playing Philippe Plard's signature accordèon tune perhaps?
   It's a lovely waltz (written by Serge Gainsbourg in 1962).

   https://youtu.be/vq9hb3-5Xm8
« Last Edit: August 13, 2025, 02:18:28 PM by Chris Ryall »
Logged
  _       _    _      _ 

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: 1.5 row
« Reply #8 on: August 13, 2025, 02:17:50 PM »

We were dancing in a festival in a small hilltop town with a mix of local dance troupe.
The person I'm thinking off lassoed any lady he took a fancy too then danced with them whilst playing behind her back.
All good fun, and actually quite impressive  ;D
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: 1.5 row
« Reply #9 on: August 13, 2025, 03:00:07 PM »

The person I'm thinking off lassoed any lady he took a fancy too then danced with them whilst playing behind her back.

Ok, that's the first good, practical reason to have a small, lightweight melodeon that I've heard so far.
« Last Edit: August 13, 2025, 03:02:00 PM by mChavez »
Logged

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: 1.5 row
« Reply #10 on: August 13, 2025, 03:32:54 PM »

 ;D
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: 1.5 row
« Reply #11 on: August 13, 2025, 04:04:38 PM »

Yep, LMMH 10 button single row in D with a kazoo in C nat.   :D
Logged

CAB

  • Mass Debater
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1147
    • Somerset Russets Village Band
Re: 1.5 row
« Reply #12 on: August 13, 2025, 04:10:11 PM »

Irish-American boxes from the 1930-50s (such as Baldoni-Bartoli or Walters) or more recent Québec ones (like Sag'né or Bouchard) are probably what you have in mind. Typically in D with a partial C# row.

Lars Hansen posted pictures and a video of a Baldoni he restored on Facebook just yesterday, and Howard Mitchell has a Sag'né I think, so maybe they could comment further.

That's exactly the sort of thing I'm thinking of.  And yes, as I said, it was Howard's box I remember seeing here.  The reeds seem to have fitted into those perfectly well - and all I'd really be interested in is two voices.

My point is this, I guess:  Why have a whole row of accidentals when you only use a few of them?  For some years I played a DG 2 row +2 (helper buttons connected to the chin-end accidentals) and those 2 extra buttons were so easy to find at speed.  I never failed to hit an F natural, for example.  Now I play a 3 row D/G/acc and,while I usually manage to find my accidentals, there's always a chance I'll hit the wrong button.  The fewer there are, the more comfortable it is to navigate.  I recognise that there's a majority of 4th apart players on this forum and I'm really thinking in DC# (and right-hand-only) terms.  I had great fun experimenting with a C#D some years back but eventually concluded that, if I had two rows, I was happier with DG.  But a one row instrument plus a half-row of say 4 or 5 extra buttons would be well worth exploring.  If it was good enough for Joe Derrane...! https://www.youtube.com/watch?v=LVEXNj95Ls4
« Last Edit: August 13, 2025, 04:12:40 PM by CAB »
Logged
Pas de lieu Rhone que nous

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: 1.5 row
« Reply #13 on: August 13, 2025, 07:31:08 PM »

CAB...

Thanks for that inspiring clip of JD.
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

GBbox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 615
Re: 1.5 row
« Reply #14 on: August 14, 2025, 09:19:20 AM »

Modern Italian 1.5 instruments are have been developed into 2 full row boxes, either 9+8 or 19+ 9 instruments:

https://baffetti-accordions.com/fisarmoniche/art-44-cp/

https://baffetti-accordions.com/fisarmoniche/art-44-lusso/

Then you have instruments that can switch between a major and a minor scale – same tonic.

https://baffetti-accordions.com/fisarmoniche/art-458/

I've recently seen a 3 row variant on the Maggiore/Minore box, but don't ask me about the keyboard layout...

https://baffetti-accordions.com/fisarmoniche/art-47/

Logged

CAB

  • Mass Debater
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1147
    • Somerset Russets Village Band
Re: 1.5 row
« Reply #15 on: August 14, 2025, 11:15:34 AM »

Lovely!

Some years ago I tried to find out whether I could order a customised layout for something like this:
https://baffetti-accordions.com/strumenti/fisarmoniche-diatoniche/serie-2-bassi/
but didn't get very far.
Logged
Pas de lieu Rhone que nous

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: 1.5 row
« Reply #16 on: August 14, 2025, 12:37:09 PM »

I hadn't been messing with accordions/melodeons for very long at all, when I chanced upon a Baffetti Art 41 in C. (I think that's what it was. 9+4 with 4 basses) I had imagined (from the picture) that it was my dream 1 row. However, upon trying it out, I was dismayed at the sound and the fact that the extra row was just full of reversals, and I still don't know what the basses were supposed to be!
Fool that I now realise that I was, I sold it for less than I would have wanted for a half decent Hohner Pokerwork. If I'd known then what I know now, I wouldn't have been frightened to pull it apart and make it into what are discussing here! Dumbo strikes again!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal