Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: do pokerworks and pull-stoppers of the day share same length and width bellows?  (Read 563 times)

0 Members and 1 Guest are viewing this topic.

gunchki

  • Member
  • *
  • Offline Offline
  • Posts: 17
  • blowing on the suck

and is it sanely do-able to go and graft the treble part of a Hohner 1045 and the spoonbass section of a 4stopper together onto them with a suitable gasket arrangement?
you know, for whatever applicable reasons the end result of it could serve.
Logged

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers

yeah been done go for it
Logged
Mark Taylor
Folkloristmark

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place

Same overall dimensions yes.  The Hohners 114 case is made from thicker timber, so the spigot on the bellows frame is smaller so the bellows for the 114 will fit to the 1040, rather loosely, but wont fit the other way round.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613

yes, been done  (:) you can use your original bellows frame for each side if you want something permanent.treble side from 1040 and bass side frame from your 114.
Logged

gunchki

  • Member
  • *
  • Offline Offline
  • Posts: 17
  • blowing on the suck

yes, been done  (:) you can use your original bellows frame for each side if you want something permanent.treble side from 1040 and bass side frame from your 114.


just to settle my case, are the reeds in the 112 flat-mounted? given the pull-stop mechanism behind the model line, i was assuming not
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal