Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Pallets for Paolo Soprani  (Read 729 times)

0 Members and 1 Guest are viewing this topic.

IanK

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
Pallets for Paolo Soprani
« on: September 01, 2025, 10:49:38 AM »

Hi I have a Paolo Soprani Elite which I am working on to inprove the keyboard action.

The treble pallets are plastic with a rubber connector. Two have broken and others are cracked.

I wondered if anyone could point me to a good replacement they have used that would work in terms of the height the arm sits in at (as well as width / length which is 12x62mm)

I have checked out Carini who have various aluminium / plastic / wooden types. The wooden ones seem to be 60mm for a 4 voice and it looks like the arm would sit a lot lower (which I suppose could be compensated to a degree)

thanks
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pallets for Paolo Soprani
« Reply #1 on: September 01, 2025, 11:28:33 AM »

The wooden ones seem to be 60mm for a 4 voice and it looks like the arm would sit a lot lower (which I suppose could be compensated to a degree)


Thicker felt can compensate for a thinner lower pallet, and might also be quieter in use.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Pallets for Paolo Soprani
« Reply #2 on: September 01, 2025, 06:52:41 PM »

In addition to what Theo said, you’ll likely have to do a small amount of adjustment to the aluminum levers themselves to get them sitting where you’d like. It’s not hard to do, and there’s plenty of help on here to guide you in that regard when the time comes (just ask!).
Logged
C#/D player

IanK

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
Re: Pallets for Paolo Soprani
« Reply #3 on: September 01, 2025, 07:23:08 PM »

Many thanks both for the advice - just trying to source the pallets now for a reasonable price.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Pallets for Paolo Soprani
« Reply #4 on: September 01, 2025, 10:05:50 PM »

On the odd occasion where i break or lose a pallet I find it quickest to make a replacement from strips of wood. It's easy to do if you have a table sander to trim and shape the parts (my 'table' sander is actually a belt sander that I mount on its side to a homemade jig and table). The rubber connector might be a problem but it's likely something could be improvised.. or..if you know someone with cad skills and a 3D printer, it's an ideal candidate for 3d printing.
« Last Edit: September 01, 2025, 10:14:17 PM by Rog »
Logged

waldoB

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 126
Re: Pallets for Paolo Soprani
« Reply #5 on: September 02, 2025, 08:40:28 AM »

I had the same problem, but needed 33 new pallets. The originals were warped and damaged. After a long search I opted for the Carini 60mm long wooden pallets. 15c each but because EU minimum order of €125 had to buy from Bosetti Accordions (USA) who advertise on eBay. I made a small clamping jig and glued 2mm strips on one end, then faired flush. Easier carefully by hand than with mini modelling sander. Then attached with  hot glue gun with extended nozzle  because tight access, wax would be OK. Any synthetic foam padding or rubber attach grommets seem always seemto be a problem on older instruments.
Logged

IanK

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
Re: Pallets for Paolo Soprani
« Reply #6 on: September 02, 2025, 10:55:14 AM »

Hi Rog - thanks for the idea on the 3D printing. I do have friends who could draw up a model so might be worth a go.

Waldo - that's interesting that you had so many pallets fail, was it Club Paolo?. I saw the wooden ones you mention on the Bossetti ebay site and with some adjustment  (combination of things as suggested above) I think I could also make them work.

I was just quoted 200 Euros by Carini for a minimum order but I don't need that much material at the moment. I am not complaining abbut this as most of their business will come from professional restorers/builders.
Logged

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Pallets for Paolo Soprani
« Reply #7 on: September 03, 2025, 01:23:39 PM »

I would probably see this as an occasion to try and make pallets myself. The rubber connector can be replaced by a simple groove and the lever glued in place.
The challenge would be precision, but the cost would be next to nothing.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Pallets for Paolo Soprani
« Reply #8 on: September 03, 2025, 02:02:46 PM »

I would make or acquire new pallets with a groove and use wax/hot glue to attach the levers. The issue with the rubber sleeves is that, although there is *some* flex to them, it can be quite tricky to get the pallets sealing properly against the soundboard. The angle of the lever has to be *just right*, along with the height of the pallet+felt/leather, otherwise it may lift up part of the pallet ever-so-slightly and cause an air leak.  It can take a lot of finicky adjusting, whereas this is much less of an issue with levers that rest in a groove in the pallet, ensuring a good seal every time.  Just my experience, anyhow.
Logged
C#/D player

IanK

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
Re: Pallets for Paolo Soprani
« Reply #9 on: September 24, 2025, 09:52:06 PM »

Postscript.... I did eventually get wooden pallets and used thicker felt. It has given a good result, thanks for the advice.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal