Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Double Ray/Erica flush grille  (Read 289 times)

0 Members and 1 Guest are viewing this topic.

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Hohner Double Ray/Erica flush grille
« on: September 04, 2025, 03:27:46 PM »

Does anyone have a source for these, please? I couldn't see them listed on the Hohner spares site, but it's not the easiest thing to navigate.

I've got a new grille of the type that overlaps the plastic cabinet (the existing one isn't in great nick), but it has the same problem as the original – it doesn't quite fit. The shaping is slightly out, meaning there's pressure against the screws and they're likely to want to work loose.

The way the casing is routed makes it look as if it could have been made to take a flush grille. I don't know much about the age and history, though, it's been passed from hand to hand a couple of times.
Logged
Vintage Double Ray C#/D

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner Double Ray/Erica flush grille
« Reply #1 on: September 04, 2025, 04:24:51 PM »

The flush grilles are not available new. The only way would be to find a second-hand one.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Hohner Double Ray/Erica flush grille
« Reply #2 on: September 04, 2025, 04:40:44 PM »

Even a second-hand grill that's flush may not end up being a perfect fit for your instrument and so some adjustment would be needed in either case.  You may be best off filling the screw holes in the casework and then placing the grill in position desired and re-drilling.
Logged
C#/D player

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: Hohner Double Ray/Erica flush grille
« Reply #3 on: September 04, 2025, 05:27:31 PM »

Great, thanks for letting me know. You've saved me a lot of pointless searching.

I've filled the screw holes already, am leaving it till tomorrow to fit the new grille. It's fine once it's on, it's just that the screws on one side more or less fell out and will likely be prone to working loose again.

I might try screwing them in through a strip of felt, so at least there's less of a gap under that side of the grille. The loosening is probably caused by it shifting slightly as the box is being handled.
Logged
Vintage Double Ray C#/D
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal