Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: "Chinese" Hohner Erica ???  (Read 838 times)

0 Members and 1 Guest are viewing this topic.

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
"Chinese" Hohner Erica ???
« on: September 04, 2025, 06:03:28 PM »

Were/are currently,  Hohner Erica models made in China?

EDIT

Apologies, I should have spent another 30 minutes looking. I find it disappointing that Hohner found it necessary to go this route.

Chinese ID:
Backside, no vertical black stripe.
No 'Country of Origin' labelling

That said... how do the Chinese instruments compare to the German made?
« Last Edit: September 04, 2025, 06:49:17 PM by Lew Morris »
Logged
"It's what you learn, after you know it all, that counts." John Wooden

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: "Chinese" Hohner Erica ???
« Reply #1 on: September 05, 2025, 09:51:57 AM »

I think they are fine, except maybe the metal sheet used to make the key levers might be a bit softer…which actually makes it slightly more forgiving to work on. They sound very bright and are the same light construction, unlike most other chinese made melodeons. Well…that's what I've found anyway. My understanding is that they'll put as much quality in as you are willing to pay for (if you commission them to make something for you).
« Last Edit: September 05, 2025, 09:53:49 AM by Rog »
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: "Chinese" Hohner Erica ???
« Reply #2 on: September 05, 2025, 11:28:29 AM »

Early Chinese made Hohners were not very good. As Rog implies, Hohner worked with the Chinese and fixed the problems, and they are not too bad now.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: "Chinese" Hohner Erica ???
« Reply #3 on: September 05, 2025, 06:41:39 PM »

Thanks for the feedback.

I'm wandering the internet looking for a two-row, but not finding anything in my price range for a casual "noodling" instrument. I've had a 114c for many years, and while it's entertaining, I'd like to move on. Nothing serious, no group play, just me in the garage tormenting the neighbor's dog.

 Instruments in DG are uncommon here in the States. GC, CF, are abundant. But after listening to videos I'm beginning to think AD, or BbEb is a sound that I rather suits me.

Those, too, are harder to find. So, as a retired machinist/woodworker, I'm beginning to toy with the idea of, to use Lester's term, hot-rod one of my own from several old "parts only" instruments I've seen on eBay. Or, refurbishing an old box, and handing it over to someone to "tune". 

To that end I've found an OLD Hohner, but I'm uncertain of the key marked. B E sharp?


Logged
"It's what you learn, after you know it all, that counts." John Wooden

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: "Chinese" Hohner Erica ???
« Reply #4 on: September 05, 2025, 07:02:58 PM »

If it’s marked BEs that is the German for BflatEflat.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: "Chinese" Hohner Erica ???
« Reply #5 on: September 05, 2025, 08:21:26 PM »

Quote
If it’s marked BEs that is the German for BflatEflat.

I've forgotten my Deutsch, stumpf

Thank you.
Logged
"It's what you learn, after you know it all, that counts." John Wooden

Andrew Kennedy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 184
    • About Sword Dancing
Re: "Chinese" Hohner Erica ???
« Reply #6 on: September 06, 2025, 12:05:13 PM »

I bought a red Chinese D/G Erica as an emergency stop-gap.  I had it tuned and an Acorn fingerboard fitted and now use it regularly for morris and longsword.  It's not my favourite box but I take a perverse pride in turning up at events with probably the least fashionable box there. It does a good job in its niche and I don't have to worry about it in the way that other playerrs do, with their expensive boxes that are grossly over-specified for the job and often like carrying round an inlaid mahogany ottoman. (I believe many Pokerwork players have similar thoughts).  I don't use it for sessions, though. 
Logged

MartinW

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 202
Re: "Chinese" Hohner Erica ???
« Reply #7 on: September 06, 2025, 01:04:09 PM »

I bought a nearly new D/G Chinese pokerwork off eBay over 10 years ago. I already had several much more expensive D/G boxes, a D/G Erika and Liliput, but I fancied having a basic pokerwork again. I had to replace a couple of treble side springs in the first 18 months but have had no problems since.

It’s now the box I play more than any other, particularly outside of home. It’s light, plays fine, and I’m not too worried about it getting lost or damaged.

I recently bought a barely used late German Erica that I came across in a pawn shop at such a stupidly low price it would have been silly not to. I think it is probably from shortly before they stopped making them in Germany, and has plastic bellows frames rather than wood. I actually prefer the Chinese pokerwork.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: "Chinese" Hohner Erica ???
« Reply #8 on: September 06, 2025, 02:54:40 PM »


I recently bought a barely used late German Erica that I came across in a pawn shop at such a stupidly low price it would have been silly not to. I think it is probably from shortly before they stopped making them in Germany, and has plastic bellows frames rather than wood. I actually prefer the Chinese pokerwork.

Plastic bellows frames were introduced in the 1970s, around 20 years before production moved to China.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal