Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: resetting reed position  (Read 325 times)

0 Members and 1 Guest are viewing this topic.

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
resetting reed position
« on: September 17, 2025, 07:34:15 AM »

I have bad experiences trying to correct reed position. What happens is this: the reed is bent too far inward. I pull it back and insert a rod at the base, then I start pushing down to change the position at the base. Now the reed is open too far. I push back somewhere in the middle and now the reed is no longer straight but S shaped. It won't produce a proper sound.
Can this be corrected? What is the proper way to reset a reed?
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: resetting reed position
« Reply #1 on: September 17, 2025, 08:02:32 AM »

https://forum.melodeon.net/index.php?topic=31236.msg362621#msg362621

You can't just adjust at the base. You can also bend the tip and bend the middle - just have to experiment with poking the reed with a small rod/screwdriver and supporting it with your fingers and a pinger.
It's more of an art than a science as different brands of reeds respond differently.
With non-piccollo reeds you can also gently push the reed out of the slot (in either direction) and then bend/curl it with your fingers. The bending curve position can be tweaked by changing the finger pressure point and supporting the reed with a rod/screwdriver.

Better practice on trash reeds, as bending the tongue back & forth will work-harden it.
« Last Edit: September 17, 2025, 08:09:58 AM by mChavez »
Logged

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: resetting reed position
« Reply #2 on: September 18, 2025, 06:35:18 PM »

Thanks for the advice!
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal