Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: No air button - cheap solution?  (Read 1005 times)

0 Members and 1 Guest are viewing this topic.

LesTroisAccords

  • Member
  • *
  • Offline Offline
  • Posts: 4
No air button - cheap solution?
« on: September 18, 2025, 05:50:06 AM »

Hello!

I recently purchased a C/F Club melodeon that doesn't have an air button. I'm new to the instrument. The right-hand second-row button closest to the knees acts as an air button when pushing but makes a note when pulling.

I did use the search, and saw that people can add air buttons, but I don't really understand how that is done. It sounds like that would involve a visit to a fetterer, which sounds expensive.

How terrible would it be for me to just go in there and remove the reeds from one of the left hand buttons and use that as the air button? If I was doing that, is there a button that would be best to remove? I'm thinking one of the ones that makes a single note would be less useful than one of the ones that makes a chord.

I think the previous owner got around this issue by just shoving it because the bellows seem loose.

Thanks for your advice!!
Logged

Squeezebox Of Delights

  • Good talker
  • **
  • Offline Offline
  • Posts: 81
Re: No air button - cheap solution?
« Reply #1 on: September 18, 2025, 06:38:32 AM »

I'd be very surprised if it doesn't have an air button. , as it's something that's quite important for playing a bisonoric instrument. Are you sure the button hasn't just fallen off, leaving an empty hole? If you remove the panel on the bass side you should be able to see if it's got an air button mechanism.
Logged
Oops! All Hohners

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: No air button - cheap solution?
« Reply #2 on: September 18, 2025, 07:22:13 AM »

Sounds like your box is in poor condition and requires a service.

The button has to be there on a bisonoric.
Are you sure it's not a compact CBA?  :-X Can we see some photos?
Logged

LesTroisAccords

  • Member
  • *
  • Offline Offline
  • Posts: 4
Re: No air button - cheap solution?
« Reply #3 on: September 19, 2025, 10:35:06 PM »

I'm pretty sure it's a C/F club and not a CBA. The keys are really similar to the CF Club 30 keyboard map on this site (https://forum.melodeon.net/files/site/CFclub30.png), except there are fewer keys and the keys on the edges are a bit different.

Here's a picture of the left-hand side:
https://imgur.com/a/2GFd0Gv


And here's the left-hand buttons:
https://imgur.com/a/8PE5nt1


And here's the top:
https://imgur.com/a/R766MHV


Might one of those holes have been where a button for air used to be?

Thanks so much for your help!
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: No air button - cheap solution?
« Reply #4 on: September 19, 2025, 10:54:51 PM »

I would suggest that the smaller hole in the end plate could well be a button hole. Why else would it be a different size?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: No air button - cheap solution?
« Reply #5 on: September 19, 2025, 11:11:02 PM »

Is this it?

https://www.dropbox.com/scl/fi/s107a4wtbx90ug2jowxut/Air-button.jpg?rlkey=x0ih8f193hagpk4chxjhrp1f5&st=9eb60h05&dl=0

(Sorry, I don't know how to post images so that you get a preview.)
Logged
Vintage Double Ray C#/D

LesTroisAccords

  • Member
  • *
  • Offline Offline
  • Posts: 4
Re: No air button - cheap solution?
« Reply #6 on: September 20, 2025, 04:50:24 AM »

Fionn -- yes! That must be it!
https://imgur.com/a/b7Ihonv


There's a mechanism right by the big open hole that ends up right around where the hole you pointed to it. Are air buttons universal/replaceable? Could I just buy one and shove it in there or does it require skills/experience?

Also, the block of the bass notes wiggles a bit. The blocks for the chords are tighter. Could the loose bellows be due to the bass notes wiggling? Would regluing them (woodglue?) potentially fix the loose bellows issue?
https://imgur.com/a/p896Uw6


Thanks so much!!!
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: No air button - cheap solution?
« Reply #7 on: September 20, 2025, 06:57:02 AM »

Suggest you unscrew the 4 feet; almost certainly the screws holding the feet double as securing the end plate. (The hard part though might be the tiny screw in the middle, close to the buttons, which might need a bit more persuasion.) Once the end plate is removed, you should be able to clearly see the air button mechanism; it is possible that nothing is broken, but just needs re-seating. Worth a look and possibly a photo to see if it can be saved.
A more serious issue may be the wiggly low reed block. It probably needs to be removed and re-glued. It looks like there may be a problem with the wax holding the reeds in place too, and that could be the cause of air loss.
All bread and butter jobs for an experienced repairer, but only you can decide whether you have the necessary skills for DIY. The greatest concern is that you could fix these problems and then discover further faults of which you may not yet be aware. Sadly, when these type of problems are found on an old melodeon, it is often indicative of other faults, both from wear and tear and from poor original design, construction or material quality. A visit to a repair shop for an assessment might be in order before getting too involved with repairs that are not viable.
I hope this advice may assist. Good luck.
Logged
Tuner/repairer, now retired.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: No air button - cheap solution?
« Reply #8 on: September 20, 2025, 09:49:43 AM »

Look carefully before gluing the bass block.  Hohner bass blocks are usually held in by a wooden block at each end and a small metal bracket with a screw
 at one end.  These blocks could be loose, the metal clip could be loose, or parts of the reed block could have failed joints.  You need to diagnose before applying glue or you might make things worse.

In any case a loose reed block would not cause air leaks.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: No air button - cheap solution?
« Reply #9 on: September 20, 2025, 02:49:14 PM »

https://youtu.be/FEWCnbHArns?si=vdil3GJcAGx46sGl

 I suggest watching some videos like the one linked above so you know what your looking at when you take the bellows pins out. The bellows should be a tight fit and not leaking any air. When you take the bass plate off you shoul see the air button mechanism ( just a flap operated by a rod with a button on the end.)
I suspect the whole mech. is missing on yours, and they've taped over the air hole. You need to look inside anyway to see whats there. Good luck - John.
PS Post some photos & we'll soon be able to tell you what needs doing. 👍👍
 
« Last Edit: September 20, 2025, 02:51:36 PM by JNM SY »
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: No air button - cheap solution?
« Reply #10 on: September 20, 2025, 04:12:55 PM »

Hohner bass blocks are usually held in by a wooden block at each end and a small metal bracket with a screw at one end.  These blocks could be loose, the metal clip could be loose, or parts of the reed block could have failed joints.  You need to diagnose before applying glue or you might make things worse.

In any case a loose reed block would not cause air leaks.

Theo, while your above comments are true of Hohner melodeons, I'm not convinced that the instrument in question is a Hohner, and nowhere in his post does he claim that it is a Hohner. The latest photo supplied by the OP appears to show the low note reedblock is glued in, or possibly attached by some other means than that normally seen on a Hohner. It seems that it was quite a common feature of some other makes at one time to have an easily removable fitting for the chord block, but not for the low reed block. 

I agree that a loose reed block would not directly cause air leaks, but the OP doesn't claim leakage of air as such, and I should not perhaps have used the term "air loss" in my previous post. Compression loss would have probably been a better term, caused by excessive air flow seeping around reedplates when buttons are pressed, due to glue or possible wax failure. 
« Last Edit: September 20, 2025, 06:18:17 PM by Malcolm Clapp »
Logged
Tuner/repairer, now retired.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: No air button - cheap solution?
« Reply #11 on: September 20, 2025, 05:54:58 PM »

Theo, while your above comments are true of Hohner melodeons, I'm not convinced that the instrument in question is a Hohner, and nowhere in his post does he claim that it is a Hohner. The latest photo supplied by the OP appears to show the low note reedblock is glued in,

Thanks Malcolm, you are quite correct.  I had missed the last couple of photos.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

LesTroisAccords

  • Member
  • *
  • Offline Offline
  • Posts: 4
Re: No air button - cheap solution?
« Reply #12 on: September 21, 2025, 01:17:48 PM »

Wooo!! The air button issue is fixed!!!!! Thank you so much!!!!



https://imgur.com/a/l1mVmRC

When I took the endplate off, I found the air button!



https://imgur.com/a/sorry-its-blurry-iUZnSy3

The air loss/compression loss issue seems less urgent because it does play, it just could be a little tighter. I'm going to have to do some thinking about whether I want to see a fetterer or take on the project myself. The insides of the melodeons are fascinating.

The melodeon is a "Buttstadt Kristall" sold by Musikhaus Barth & Rebholz Konstanz-Singen. I think it's from East Germany.

Thanks again!!


« Last Edit: September 21, 2025, 01:19:38 PM by LesTroisAccords »
Logged

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: No air button - cheap solution?
« Reply #13 on: September 21, 2025, 05:03:52 PM »

Glad you got it sorted – it looks like a nice vintage box from the pics.
Logged
Vintage Double Ray C#/D

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: No air button - cheap solution?
« Reply #14 on: September 21, 2025, 05:36:45 PM »

 Vintage boxes often need the bellows gasket replaced.
New gasket tape is self- adhesive, just peel and stick.
 Glad you found the air button - you can do the other stuff in your own time now that its playable.👍   John.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal