Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: What fits what?  (Read 740 times)

0 Members and 1 Guest are viewing this topic.

Morty SKC

  • Member
  • *
  • Offline Offline
  • Posts: 14
What fits what?
« on: September 21, 2025, 01:30:51 PM »

I’m looking for an inexpensive donor with decent bellows so I can build a tuning table. I’m curious as to what models to look for that allow the most parts salvage. Are there piano accordions with parts that can be used in button boxes?
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: What fits what?
« Reply #1 on: September 21, 2025, 02:08:25 PM »

Hohner Student I PA, same dimensions as pokerwork, bellows, pallets, pins etc…
Logged
Dancing about architecture since 1997

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: What fits what?
« Reply #2 on: September 21, 2025, 05:02:16 PM »

Hohner Student I PA, same dimensions as pokerwork, bellows, pallets, pins etc…

That's really useful to know. Does it also go for Ericas? I got the impression they share dimensions with pokerworks, but might have got the wrong end of the stick.
Logged
Vintage Double Ray C#/D

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: What fits what?
« Reply #3 on: September 21, 2025, 05:08:27 PM »

Just in case you're not aware, it's often possible (and quite simple) to use the instrument you're working on as a tuning table.
Logged

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: What fits what?
« Reply #4 on: September 21, 2025, 06:09:29 PM »

 I've found this table of sizes usefull when building or modifying boxes.
Logged

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: What fits what?
« Reply #5 on: September 21, 2025, 06:16:32 PM »

Here's the other half of the table.- I dont remember where I downloaded it from, maybe someone on here will know.
Logged

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: What fits what?
« Reply #6 on: September 21, 2025, 06:52:47 PM »

That's brilliant, thank you!
Logged
Vintage Double Ray C#/D

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: What fits what?
« Reply #7 on: September 21, 2025, 07:04:31 PM »

I'd look for a 'junk' PA, and cannibalise that. The bellows should be fine, and you'll have plenty of reeds on which to practice your tuning and waxing skills.

A Hohner Student 1 is a great melodeon conversion project, due to its pokerwork dimensions.
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: What fits what?
« Reply #8 on: September 21, 2025, 11:47:38 PM »

I have 2 sets of tuning bellows, and they're both made with old melodeon bellows. I believe that bigger (e.g. most PA bellows) give a different reading than typical melodeon bellows when tuning reeds. I have noticed that tuners sometimes say that they tune reeds (from scratch) about 15 cents sharp, which they find only need a little fine tuning when in their proper box. But when I swap tuned reeds into their own box after tuning on my bellows, they're just about right! I may be wrong about others, though. Don't take what I say as gospel!
If you want a set of horrible old melodeon bellows, I could probably donate some. Send me a message.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Morty SKC

  • Member
  • *
  • Offline Offline
  • Posts: 14
Re: What fits what?
« Reply #9 on: September 23, 2025, 05:05:22 PM »

I’ve found a donor box for the tuning table build, yay!
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal