Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bass button squeak  (Read 514 times)

0 Members and 1 Guest are viewing this topic.

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Bass button squeak
« on: September 29, 2025, 11:06:17 AM »

Two of the bass buttons on my Erika have decided to start squeaking and it's driving me nuts.  I seem to recall a thread on here which included various suggestions as to how such a thing may be cured, but the search function's got me nowhere.

Does that ring a bell with anyone whose Goggle-fu is better than mine?
Logged
We're all doomed ...

Kath Harper

  • Good talker
  • **
  • Offline Offline
  • Posts: 67
    • Noise From the Blanket Fort
Re: Bass button squeak
« Reply #1 on: September 29, 2025, 11:31:09 AM »

I've used a tiny amount of graphite. Actually used a sharp pencil point and rubbed it gently around the inside of the hole and it stopped the squeak on my Club IIIM bass button. If the squeak is the button against the side of the hole that might work instead of a slightly more drastic sanding.

I think if you select Forum Home and enter in search Button Squeak you may find the thread you're wanting.
« Last Edit: September 29, 2025, 11:35:30 AM by Kath Harper »
Logged
Goal: "Play tunes I love proficiently, with musicality" | Antique Hohner Fixer-upper in self-training | Melodeons: Saltarelle Gaia GC - Beltuna Sara 2 DG  -  Hohner Pokerwork Vienna with D/G Anahata layout 
Other instruments |  Hohner Club IIIM needing work - Piano accordions - 6 PAs needing a tuning, work, or resto | Tin Whistles and Low Whistles - Wooden and metal flutes | Guitar | Yamaha P60 EP | Assorted diatonic and chromatic Hohner harmonicas | Turkish Meys in G, Eb and A, a D Duduk, and an A Ney
https://www.youtube.com/@kathharper-NFTBF

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass button squeak
« Reply #2 on: September 29, 2025, 11:57:04 AM »

Yes graphite is a good squeak suppressor.  But you have to apply it to the source of the squeak.  It can be a button rubbing on wood, it can also be from the metal action parts, including the spring.  If you use a pencil use the softest grade you have.  Another method is to apply powdered graphite mixed the pure alcohol.  This is easier to apply to metal action parts because it will run into gaps between parts.  Apply the mixture with a small paintbrush.   If you don't have powdered graphite handy you can make some by rubbing the soft pencil lead on fine sandpaper.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Bass button squeak
« Reply #3 on: September 29, 2025, 02:59:57 PM »

Thank you.  The squeak is definitely the buttons rubbing against the wood.  I have soft pencils and I have powdered graphite, but what's not obvious to me is the best way to apply this where its needed.  How are the buttons fixed to the linkage?  Glued or just a tight fit?
Logged
We're all doomed ...

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass button squeak
« Reply #4 on: September 29, 2025, 03:21:50 PM »

Best not to remove the buttons.  They are a tight fit and can be hard to put back on.  If you have a small artists paintbrush you should be able to get some graphite/meths mix into the gap around the buttons.  If you take the bass cover plate off you can place some from inside too.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Bass button squeak
« Reply #5 on: September 29, 2025, 05:35:32 PM »

Thanks Theo.  Yep, have the small artist's brushes, and isopropyl alcohol in lieu of meths.  Just so I know what any likely risks are, will the finish on the Erika in this snap be cellulose or some kind of French polish?
Logged
We're all doomed ...

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass button squeak
« Reply #6 on: September 29, 2025, 05:49:20 PM »

Not sure what the finish is, more likely shellac than cellulose
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Fionn

  • Regular debater
  • ***
  • Online Online
  • Posts: 194
Re: Bass button squeak
« Reply #7 on: September 29, 2025, 06:12:33 PM »

Just a thought - have you needed to take the casing off the bass cabinet?

I recently had to remove the plastic fingerboard from my Hohner, and discovered it's possible to put it back so it appears to sit perfectly but one of the buttons rubs. I loosened both attachment screws, reseated it slightly, and tightened it again. No more squeaks.

Logged
Vintage Double Ray C#/D
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal