Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3 4 5   Go Down

Author Topic: Resonance issues with reedblocks  (Read 6981 times)

0 Members and 1 Guest are viewing this topic.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Resonance issues with reedblocks
« Reply #20 on: October 01, 2025, 10:22:32 AM »

After reading those quotes from VA, perhaps reed manufacturers should supply correctly designed blocks along with their reed sets?
If it was me, I'd want my products to work at their optimum level, not just to sound the right note.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Resonance issues with reedblocks
« Reply #21 on: October 01, 2025, 10:35:49 AM »

I wonder whether that paragraph was the product of their R&D department or their marketing department.  ;D
I strongly suspect it's the latter. Could even have been composed by AI. A lot of hot air, unless backed by formulas and chamber blueprints provided with the product.
« Last Edit: October 01, 2025, 10:37:50 AM by mChavez »
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Resonance issues with reedblocks
« Reply #22 on: October 01, 2025, 11:37:38 AM »

So..mselic…did you try altering the airflow (i.e. reducing the size/shape of the hole) or reducing/altering the depth of the offending reed chamber? Having read Theo's post it might be something to experiment with. Though I have seen one or two Castagnaris clearly fitted with blocks not designed to fit that instrument (holes the wrong shape and in one case slightly misaligned), and or designed for (say) CF reeds (marked as such) and fitted with DG reeds, so I am a bit sceptical about Italian reed and box maker's technical blurb. It's there to maintain the mystique.
(Mselic..you beat me to it..)

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Resonance issues with reedblocks
« Reply #23 on: October 01, 2025, 12:41:13 PM »

To be fair, I know for a fact that certain reed chamber volumes can choke a reed - the dead zones - to the point that a perfectly good reed won't even start. Having a chamber very close to a dead zone for a reed will degrade its performance.

There are also certain chamber volumes that make a reed a lot more responsive and noticeably louder, but
1) They are typically about 6-8x bigger than what you find in traditional reedblocks. Therefore only applicable to highest piccolos in practice - otherwise they won't fit into the box.
2) Varying chamber volume within practical squeezebox dimensions does not produce any noticeable effects for most octaves unless you're really unlucky to hit close to the dead zone.

So for chamber volume (I'm not touching on chamber shape or the combination of the two factors) it works in only one way: you can degrade a reed's performance but you can't magically improve it into the sweetest-sounding reed in the galaxy.

In practice I design my reed chambers as deep and wide as possible, ensuring that the internal valves have good clearance. While a simple working valve is not as sexy as a room full of physicists in Castelfidardo working day and night on  secret quantum computers, calculating the most optimal accordion reed chamber volume, I'd say it's a lot more important in practice. ;)

So there's a bit of sense in that blurb but it's been put through a marketing-hype-generating romanticised-mysticism-creating machine.
« Last Edit: October 01, 2025, 12:44:22 PM by mChavez »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Resonance issues with reedblocks
« Reply #24 on: October 01, 2025, 02:12:23 PM »

Have to agree that the flowery language on the VA website is an obstacle to good understanding! 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Resonance issues with reedblocks
« Reply #25 on: October 01, 2025, 04:04:54 PM »


2) Varying chamber volume within practical squeezebox dimensions does not produce any noticeable effects for most octaves unless you're really unlucky to hit close to the dead zone.

So for chamber volume (I'm not touching on chamber shape or the combination of the two factors) it works in only one way: you can degrade a reed's performance but you can't magically improve it into the sweetest-sounding reed in the galaxy.


Sorry, but I'm going to have to strongly disagree with you here, based on my own extensive experience as of late.  I can guarantee you that the tone and timbre of my instrument changed most noticeably simply be reducing or increasing the volume (depth) of my reed chambers.  While the reduced chamber sizes produced a sweeter/softer tone. the trade-off was that the response of the instrument, and they way it felt when played, was different in a way that I didn't like as much.  Conversely, when the chamber sizes were increased the instrument felt like it really 'opened up', volume increased but the tone took on a harsher quality.  The experiment has been repeated several different times with different reeds, different blocks and two different instruments, and the results were always the same.  I had to make a choice/compromise with how I wanted my instruments to be.  I loved the sound of the box with smaller reed chambers, but I preferred how the box played with larger chambers.

Have to agree that the flowery language on the VA website is an obstacle to good understanding! 

I'm familiar with VA's description and claims of their BlueStar reeds.  I once contacted Lorenzo Antonelli (owner of VA who designed the BlueStar reeds) with some feedback and questions, and his responses to me all sounded like marketing hype, too!  It's worth noting that enough of VA's clients complained about the new BlueStar reeds that they were forced to bring back their "A-Mano" line as well (BlueStar originally replaced the AM line of reeds).
Logged
C#/D player

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Resonance issues with reedblocks
« Reply #26 on: October 01, 2025, 04:12:11 PM »


  A good maker will match the chambers to the specification.

  when my Gaillard came one of the reed pairs was in the wrong octave. Too low. After a while a reed plate came by post and I took it up to Theo to get it swapped in. He lives near my mother.  He put in some clever fillets of wood to reduce the size of the chamber, but it still sounds different from the other one.

   I was only using it as a reversed note to play chords, so all is well. But that's another experimental data point supporting mselic's point.

  But wrt "always worse" … I guess that presumes that the maker a got it right in the first place? 🤔
« Last Edit: October 01, 2025, 06:39:04 PM by Chris Ryall »
Logged
  _       _    _      _ 

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Resonance issues with reedblocks
« Reply #27 on: October 01, 2025, 04:41:00 PM »

How about adding some mass to one of the blocks to try and make sure the adjacent reedblocks are completely different weights.
It might help stop the blocks vibrating in sympathy.
A small square of lead tacked on to the top of the bass end? About the weight of half a dozen reedplates should make enough difference.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Resonance issues with reedblocks
« Reply #28 on: October 01, 2025, 04:45:53 PM »

How about adding some mass to one of the blocks to try and make sure the adjacent reedblocks are completely different weights.
It might help stop the blocks vibrating in sympathy.
A small square of lead tacked on to the top of the bass end? About the weight of half a dozen reedplates should make enough difference.

That was one of the things that I’ve tried, both this time and in the past, that did not help in my cases.
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Resonance issues with reedblocks
« Reply #29 on: October 01, 2025, 08:06:21 PM »

So..mselic…did you try altering the airflow (i.e. reducing the size/shape of the hole) or reducing/altering the depth of the offending reed chamber? Having read Theo's post it might be something to experiment with. Though I have seen one or two Castagnaris clearly fitted with blocks not designed to fit that instrument (holes the wrong shape and in one case slightly misaligned), and or designed for (say) CF reeds (marked as such) and fitted with DG reeds, so I am a bit sceptical about Italian reed and box maker's technical blurb. It's there to maintain the mystique.
(Mselic..you beat me to it..)

I can try and get back to you.  The problem was reduced in the original reedblock with shallower chambers, but I can't say for sure yet if that's due to the overall construction of the block itself, or if it was due to the shallower chambers.  The thing is, the whole reason I built new blocks for it was so that I could achieve the results I wanted with deeper reedblock chambers.
Logged
C#/D player

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Resonance issues with reedblocks
« Reply #30 on: October 02, 2025, 10:31:06 AM »

It's worth noting that enough of VA's clients complained about the new BlueStar reeds that they were forced to bring back their "A-Mano" line as well (BlueStar originally replaced the AM line of reeds).

I don't really think that's the reason why. One or two years back, they did a tour of makers and tuners in France with two similar accordions, one with BlueStar, the other with A mano, and pretty much no one was able to tell the difference between the two. So as always with accordions, the confirmation bias is a very strong part of what people like or not, rather than objectifiable facts.
Although the description is a bit vague, I think Lorenzo is really sincere in his effort to better understand how the reeds work, what influences the timbre qualities and so on, and hence, to design new reeds, or at least to control the making parameters. What I understand of the a mano range that resurfaced is rather that they're after a different timbre quality.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Resonance issues with reedblocks
« Reply #31 on: October 02, 2025, 03:18:39 PM »

It's worth noting that enough of VA's clients complained about the new BlueStar reeds that they were forced to bring back their "A-Mano" line as well (BlueStar originally replaced the AM line of reeds).

I don't really think that's the reason why...

Over the last few years I was in regular contact with several of VA's dealers as well as builders that buy VA reeds in bulk, and they were all told by Lorenzo that VA's A-Mano line was being replaced with the BlueStar line.  Several of them had a noted preference for the A-Mano reeds over BlueStar (myself included) but were told by Lorenzo that under no circumstances would VA be making the A-Mano line available again; BlueStar would be their new, top-tier reed with the previous line discontinued.  The option was also removed on VA's website. Some of these builders, who used the A-Mano line for many years in their instruments, found they disliked some qualities of the new reeds and complained, but they were told that they needed to 'optimize the reed chambers' to get the most out of them.  Fast forward to sometime earlier this year, and I noticed that an A-Mano option was once again available on their website.  I inquired with one of the builders who told me that he'd heard that many dealers/builders had been unhappy with the BlueStar line and had been complaining, and so, given that VA had seemingly reversed their stance, we assumed there was a good chance that the A-Mano line was brought back because of this.  However, reading the info on their website, one can see that the new A-Mano line is not the same as the old as the reeds are now cut from a different strip of metal, and this one builder claims that its actually a step-down in terms of quality from the previous line for that reason.  The previous A-Mano line and the BlueStar line were essentially the same reed (same dimensions, scale length, etc) but with the latter having undergone an additional hardening process.

Regarding the BlueStar reeds themselves, I most definitely noticed a big difference in timbre when I swapped a matching set of their A-Mano reeds with the new BlueStar reeds in an instrument of mine.  They had a much richer, more full sound.  However, the drawback was that they were *noticeably* quieter and much stiffer (not surprising, given that additional reed hardness due to the bluing process is something VA was actually praising).  I also found that the higher reeds did not speak well, no matter how much careful adjusting I did of reed gaps.  Experimenting with changing reed chamber size might have helped, but that's a lot of trial-and-error for so many different reeds when the previous reeds worked just fine...The reeds also arrived with gaps set VERY high.  All of my observations were shared with one builder who ordered multiple sets at a time, who encouraged me to share my observations with VA in the hopes that if enough people did, they might do something about it.  I played the instrument with the new reeds daily for about 6 months to break them in, after which I went back to the original A-Mano reeds.  The sound was not as sweet anymore, but the volume was back and the thing played much more easily.

I agree with you that Lorenzo is passionate about his reeds and that he means well.

I suppose we're getting off topic here a bit...
Logged
C#/D player

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Resonance issues with reedblocks
« Reply #32 on: October 02, 2025, 03:47:49 PM »

That's where I was going: the new A mano range is not the same than before. One thing that transpires from exchanges with Lorenzo is that he's quite concerned with the loss of knowledge in italian manufactures. It seems the quality is very much dependent on a few key skilled workers, and it's very difficult to maintain this knowledge when they retire, and also to transition from trial-and-error and expertise towards a more objectified process.
A bit off-topic yes perhaps  ;D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Resonance issues with reedblocks
« Reply #33 on: October 02, 2025, 04:01:41 PM »

Earlier this week I tried to order some VA a mano reeds through an established dealer and was told only blue star is available.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Resonance issues with reedblocks
« Reply #34 on: October 02, 2025, 04:04:09 PM »

"A bit off-topic yes perhaps"

Quite, but most interesting, thank you both.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Resonance issues with reedblocks
« Reply #35 on: October 02, 2025, 04:48:48 PM »

Earlier this week I tried to order some VA a mano reeds through an established dealer and was told only blue star is available.
Following this discussion I asked a friend that makes accordions if he had already listened to the 'new' a mano reeds, and apparently VA are only making unisonoric reeds for this range...  :(

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Resonance issues with reedblocks
« Reply #36 on: October 02, 2025, 06:19:24 PM »

Sorry, but I'm going to have to strongly disagree with you here, based on my own extensive experience as of late.

No need to apologise - you're very welcome to disagree and I respect you sharing your experience as a fettler. My extensive testing produced no significant timbre variations whatsoever, including changing chamber size while the reed was sounding. So we must be doing something differently. But I never made the chambers so small, that the reeds were no longer performing as they should and there would be a significant deterioration of response.

If you don't mind me asking, what are your thoughts on the bluestars vs vintage Catraros? I'm still tempted to get a set of the latter for a hromka build, given their reputation with Galliano.

apparently VA are only making unisonoric reeds for this range...  :(
Time to switch to a hromka  ;)  :||:
Logged

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: Resonance issues with reedblocks
« Reply #37 on: October 02, 2025, 06:31:47 PM »

getting back to the discussion relating to binci reeds im left wondering if its the reeds themselves that are causing the resonance and not the blocks...especially since bracing of blocks has been eliminated and using different reeds "solves" the problam. If its purely to try and identify the issue why not try changing the mass of the reed and or/ the reed plate (ok that might mean sacrificing a reed but its only a reed and it can allways be replaced by another binci)....how about shaving of the top or bottom of the reed plate and refitting it to see if that makes a difference? Another thought is to file the tip of the reed to sharpen it by 20 or 30 cents / and then scratch or file the rivet end of the reed to bring it back to where it was tuning wise. Its just a wild guess but if one or other of these things helps it might open an avenue of thought. Another way instead of shaving the top or bottom of reed down (since this will involve changing the reed chamber) is to grind or drill out some of the material of the reed plate. Crazy idea i know and not really a solution but worth a try?
« Last Edit: October 02, 2025, 06:33:46 PM by chris hall »
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Resonance issues with reedblocks
« Reply #38 on: October 02, 2025, 09:46:41 PM »

First thought would be to offset the blocks slightly so the sounding reeds aren't quite in direct opposition...but that might just create a bunch of mechanical issues.

I did try this, but there isn't really any room to move the blocks laterally.  There would also then be issues of the sound holes between blocks and fondo not quite lining up.  I'm going to see if blocks angled further apart will have any mitigating effect.

hi have you tried cutting a panel pin to wedge in between the reed block at the top of the block above or in between the problem reed it also could be the reed tongue needs tightening against the reed plate making sure the tongue is centre in the reed plate

I should have added "tightening reed rivets" to my list of things that I've tried that have not worked (both with this instrument and with similar situations in the past).  I'm not sure what you mean by 'cutting a panel pin to wedge...' etc?

Have you tried any sort of baffle between the reed blocks?  How about stiffening/dampening the Fondo?

I did, yes.  It did not seem to make a difference.  I'm not sure what you mean about stiffening/dampening the fondo? The fondo is aluminum in both cases.

I see you said changing the wax did not solve it, could adding a screw to tighten the contact to the reed block help?  A lot of my boxes have pins as well as wax holding the reed plates down - just a thought.

The dividers between reed chambers are far too thin to accept a screw or pin.  I suppose I could try at the top of the reedplate.


The frustrating thing with all of this is not being able to understand WHY the issue is occuring.  My understanding in the past was that more rigidity is needed (hence the bracing), but when blocks are laying flat, tightly secured together and against every point of contact with the casework, I'm not sure how much more rigid things can get.  Coming from a design/build perspective, I would like to better understand why the issues are occuring so that I can avoid them when building new blocks and/or eventually event an instrument.  As it is right now, it seems like a bit of a crap-shoot.

This kind of problem occurs whenever you have two resonators/oscillators tuned to almost the same frequency with any weak coupling between them -- here it's a mechanical resonance (two closely-tuned reeds), we often see it with inductive coupling between on-chip oscillators in PLLs. If there's enough coupling then they lock together at the same frequency and the tremolo disappears, if it's weaker they "stick-and-slip" -- instead of the phases moving smoothly past each other they pause/slow down ("stick") and then speed up ("slip") and move more quickly.

With reeds, because the waveforms are not symmetrical and the reeds are not identical the two "sticks" in a cycle can be different, as can the two slips -- then you get this wah-WAH effect.

The reason it usually only happens on one note -- or at least, is worst -- is that any resonance between/along the reed blocks and the fondo/body increases coupling, and such resonances are usually quite narrow in bandwidth. But there are many possible resonance modes inside the blocks and along them (e.g. torsional) as well as between blocks, so any change like added bracing might affect the resonance that's causing the problem or it may have no effect. Bracing the blocks might help as might making things more rigid, but sometimes this can make things worse because more rigid structures tend to have higher-Q and higher-frequency resonances. Damping the resonance with some kind of energy-absorbing material can help, but again only if it affects the problem resonance -- which it might or might not do.

If you could identify exactly what the resonance causing the problem was then it should be possible to fix it, but this is difficult since the energies concerned are small and you're trying to detect vibration in something which is also making a lot of noise -- and you need to do this inside the instrument, though it might be possible to do this on the bench. If you can make this happen on the bench -- for example with the instrument treble end mounted with the blocks facing upwards -- then there's some chance of finding what is happening, get the wah-WAH to sound and then try pressing something either massive (e.g. a heavy metal cylinder) against different parts of the reed blocks to see if you can stop it. If you find a place that does this, that would be a good place to try attaching a brace to the other reed block.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: Resonance issues with reedblocks
« Reply #39 on: October 02, 2025, 11:21:12 PM »

Damping the resonance with some kind of energy-absorbing material can help, but again only if it affects the problem resonance -- which it might or might not do.

Funnily enough I was wondering about squashing some Blu-Tack under each of the blocks in turn to act as a temporary damper/isolator, or packing some between the two opposing blocks. Chances are it'd be yet another thing that doesn't help, but at least it wouldn't take long and is easy to undo.
Logged
Vintage Double Ray C#/D
Pages: 1 [2] 3 4 5   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal