Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner 114 - is restriciton of the Treble Action movement possible?  (Read 560 times)

0 Members and 1 Guest are viewing this topic.

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215

I've watched Lester's video on restricting the treble action on the 2-row Pokerwork/Erica.

The soundboard, on the 114, is much closer to the end of the chest, than it is on a 2-ro2; it appears that any 'limit shim' would have to be installed inside the keyboard, on floor. I don't think I'd like to rish gluing the shim in place, so drilling holes and fitting screw would be necessary

Am I on the right track? Or is it not possible?
Is there another approach to this?

The reason I think I'd like to limit the travel are;
- I'm still somewhat heavy-handed, and I'd like to avoid breaking any springs
- I think it would improve my fingering 'speed'.
Logged
"It's what you learn, after you know it all, that counts." John Wooden

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: Hohner 114 - is restriciton of the Treble Action movement possible?
« Reply #1 on: October 06, 2025, 01:39:09 AM »

Can you buy black tack in the US? It's like Blue Tack, only much stickier and can hold surprising amounts of weight. Half my stuff seems to be held together with it.

You could stick your shim into place with a thin layer of black tack then try it over a couple of weeks to see how it (the shim) performs. It would hold it fine, and it's removable – like Blue Tack it sticks to itself very well, so any residue is easiest removed with a little lump of the putty.

This is the stuff on Amazon's UK site:

https://tinyurl.com/3r2d5c72


ETA: thinking about it, you could probably use black tack as an almost permanent way of fixing the shim in place. It might move in very hot weather, but otherwise should be fine. I've had pictures stuck to the wall with it since I moved here seven years ago – I always meant to fix them properly with screwed-in mounts, but as they're still firmly stuck I keep putting it off.
« Last Edit: October 06, 2025, 01:44:59 AM by Fionn »
Logged
Vintage Double Ray C#/D

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Hohner 114 - is restriciton of the Treble Action movement possible?
« Reply #2 on: October 06, 2025, 08:26:26 AM »

No need to take apart any further. One solution is a small individual shim (around 1/4” square profile) under each lever, topped with felt resting against lever. Another is a stick of wood resting between the edge of keyboard and the vertical levers, fronted with felt resting on the levers. Don’t reduce action too much or low reed will not sound well…
« Last Edit: October 06, 2025, 08:28:22 AM by Arnold »
Logged
Dancing about architecture since 1997

jonm

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 209
Re: Hohner 114 - is restriciton of the Treble Action movement possible?
« Reply #3 on: October 06, 2025, 10:46:59 AM »

Do you have a picture of the suggested solution, please, Arnold? Struggling to visualise it.
Logged
Castagnari Mory and Giordy D/G, Hohner Erica, four-stop in G, two-stop in G

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner 114 - is restriciton of the Treble Action movement possible?
« Reply #4 on: October 06, 2025, 04:07:57 PM »

I'm pretty sure I fitted a wooden shim onto a 114 at some time. I remember it being a bit different and I had to make a custom shim (with hardwood, softwood no good). I have in the past tried gluing a strip of felt inside the keyboard but then you can't get it back on over the levers and buttons. Older Hohner keyboards either have a removable back (onto which you can fit a strip of felt e.g. Hohner Modell II) or removable top (like the Corona and some club models). I'd be inclined to experiment with 3d printing/cad design to make a keyboard with a removable back, if I couldn't get the shim to work. But as above, restricted buttons can mess with the airflow if over done.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner 114 - is restriciton of the Treble Action movement possible?
« Reply #5 on: October 06, 2025, 04:22:08 PM »


The reason I think I'd like to limit the travel are;
- I'm still somewhat heavy-handed, and I'd like to avoid breaking any springs
- I think it would improve my fingering 'speed'.

As you can see from the comments it’s not quite so easy to limit button travel on a 114.

In practice I don’t think you need to worry about breaking a spring.  Even if you do break one it’s much easier to replace a spring than to limit the button travel.

You will also find that fingering speed improves with practice, so your time might be better spent playing than modifying the instrument!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Hohner 114 - is restriciton of the Treble Action movement possible?
« Reply #6 on: October 06, 2025, 04:33:11 PM »

Do you have a picture of the suggested solution, please, Arnold? Struggling to visualise it.

I no longer have this box at home, but here is the first method explained in an earlier post with pics… https://forum.melodeon.net/index.php?topic=29789.msg351941#msg351941
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Hohner 114 - is restriciton of the Treble Action movement possible?
« Reply #7 on: October 08, 2025, 06:52:08 PM »

This is the second method as applied to my ha114c. The stick started a little thin so I adjusted its thickness with a few layers of masking tape. The felt layer rests against the pallet leavers and pretty much holds it all in place, although I have another stick of dowel inside the grill to keep it from falling towards the pallets. It’s very basic but does the job!
Logged
Dancing about architecture since 1997

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: Hohner 114 - is restriciton of the Treble Action movement possible?
« Reply #8 on: October 08, 2025, 10:04:33 PM »

both great ideas arnold. its is possible to get padding inside the plastic fingerboard as i managed it but it wasnt easy. if the padding is too thin its seems to have no affect on button travel. IF Its too thick i couldnt get the fingerboard over the buttons. i eventually managed it by getting the fingerboard partly over the buttons and then threading a piece of pre cut padding in under the buttons. It worked but it was a lot of trial and error. Almost easier to make a new wooden fingerboard with a removeable back which is what i did and then you have a nicer fingerboard which can be adjusted easily.....i find hohner fingerboard a bit cramped so we made the distance from the holes for the buttons to the outside edge (where your thumb rests) wider which made for a much nicer feel in my opinion......but then lots of top musicians have played 114's with no modifications so maybe just play and get used to how it feels!
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Hohner 114 - is restriciton of the Treble Action movement possible?
« Reply #9 on: October 10, 2025, 07:43:27 AM »

Yes Chris, I have wrestled with one of these fingerboards myself when removing such a device (that was having too much of a limiting effect), and unless you really know what you’re doing, I don’t think it’s a good idea! The solutions I came up with are trouble free and effective.
Logged
Dancing about architecture since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal