Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Homing marks on buttons  (Read 671 times)

0 Members and 1 Guest are viewing this topic.

Juni Hag

  • Member
  • *
  • Offline Offline
  • Posts: 6
Homing marks on buttons
« on: October 14, 2025, 10:28:11 AM »

Hello,

I'm thinking of marking one button on my melodeon to get tactile information from the keyboard.
I play a 3-row GCacc with the Letron layout and often play in various keys and doing long jumps, and would like to get more feedback when doing such in front of an audience, when I cannot trial and error my way to the right button. On 2-row accordions this is much easier without markings, but on the 3 row I feel like the keyboard is just too large for me to be able to rely only on muscle memory in all occations in front of an audience.

  • What is your opinion on marking buttons on 3-row accordions?
  • Which button(s) do you suggest marking (assuming 3-row with accidentals)?
  • Do you have any tips on how to mark it?
  • Is it always possible to unscrew one button in the treble for replacement?
  • Experienced 3 row players, how have you solved it? Do you use any marking(s) or are you only relying on muscle memory?

Sorry if messy topic start. I think this topic should probably have been be asked about already somewhere on the forum, but I'm not sure what keywords to use when searching so I have only found tangential topics, but not these exact questions.

/Juni
Logged

Andy Goldfinch

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 150
    • Andy Goldfinch Melodeon (YouTube)
Re: Homing marks on buttons
« Reply #1 on: October 14, 2025, 10:48:09 AM »

On my old Loffet Pro I could unscrew the buttons to add a marker button (which I bought from CGM, but he's no longer trading). I liked them at the time, but my new box hasn't got any marker buttons and I'm getting on just fine without them, it's just a case of practicing the big jumps enough for them to be second nature. The chances are that most big jumps across the keyboard wouldn't land on your marked button anyway, and even if it did, if you're having to feel around for a different textured button to find the right note then it's probably too late. Mine is a 2.5 row though, so the half row gives more of a visual reference point than a full third row would give you.
Logged
D/G Castagnari Dony, D/G Hohner Club VII (9 bass), D/G Serenellini Maestro, C/F Hohner Club II (DIY restoration in progress...)

https://www.youtube.com/@andymelodeon

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Homing marks on buttons
« Reply #2 on: October 14, 2025, 12:26:53 PM »

For a temporary tactile marker you can stick a small circular paper label on the button.  That way you can try out different buttons to mark, and later you can remove it or replace it with a permanent mark.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Homing marks on buttons
« Reply #3 on: October 14, 2025, 02:11:12 PM »

Juni...

My approach has been to develop a fingering system which incorporates reference points as an integral part of RH technique.  I do use my thumb as a tactile "anchor" against the thumb strap, but I do not put my thumb in the strap, just a reference point.

On my Club (which does not have a thimb loop) I have the cross-hatched gleichton button. I suggest that is a likely candidate for a single marked button on a 2+ row keyboard such as yours.

Otherwise the answer is...

Time and experience.
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: Homing marks on buttons
« Reply #4 on: October 14, 2025, 03:27:28 PM »

I've marked my Cnat/C# button with a black Velcro dot, which as a beginner I've found useful for homing. I only really look at the fingerboard when I'm learning something new, and it's a neat visual clue. Might even be tempted to replace it permanently if I ever spot a listing for a spare Hohner 'black dot' key.
Logged
Vintage Double Ray C#/D

Toby B

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Homing marks on buttons
« Reply #5 on: October 14, 2025, 05:04:26 PM »

As a beginner I made use of one of those clear rubberised plastic domes you get as "feet" on small electrical gadgets on my 4th-row start keys ... almost invisible, but tactile ... and easy to remove without blemishes ...
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Homing marks on buttons
« Reply #6 on: October 14, 2025, 08:04:13 PM »

Don't actually cut or otherwise mess up any buttons, it affects the value. I bought a pokerwork from someone who had stuck diamante on the buttons, and they proceeded to mess up the removal and left pitted and uneven buttons. It meant in effect i could not sell it without replacing, so it sat there for a while, unsaleable (with me kicking myself because I had paid over the odds..not factoring this in). I got lucky in the end with a walk in buyer who just about covered my costs. But the lesson was learned.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal