Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: leaking slide = end of instrument?  (Read 620 times)

0 Members and 1 Guest are viewing this topic.

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
leaking slide = end of instrument?
« on: November 02, 2025, 01:12:12 PM »

I have a Hohner Club III with the notes of the 8’ all speaking poorly in the upper half of the keyboard. I checked the reed block on my tuning table; I can see neighbouring valves opening up wide when trying to play a note.
The bottom of the block seems flat enough. So my conclusion is the register slide is leaking. Is this the end for this instrument? Or could I maybe paint the slide to thicken it? If yes, what to use on aluminum?
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: leaking slide = end of instrument?
« Reply #1 on: November 02, 2025, 01:32:01 PM »

How did you manage to stick 8' reeds into a squeezebox?  :o

I guess if the worst comes to worst, you can pull the slider and block the slot in each hole with some wood filler.
Logged

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: leaking slide = end of instrument?
« Reply #2 on: November 02, 2025, 03:39:48 PM »

Hi William…

If you’ve removed the reedblock from the instrument, and the slider remains in the instrument (as is the design with most Hohners) then the channel in the base of the block where the slider operates allows airflow between adjacent reed chambers. So you’d expect adjacent valves to respond the way you describe…

Then when you put the block back into the instrument, inserting the slider, it blocks off (mostly) the lateral airflow down that channel.

If that’s not the issue, the solution that mChavez suggests does work … I’ve done it on boxes where the player wanted to dispense with the slider (and the slight air inefficiency it involves) and wow that 3 voice sound comes bellowing out!

Cheers

Mike

Cheers!!

Mike
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: leaking slide = end of instrument?
« Reply #3 on: November 02, 2025, 04:25:27 PM »

I'm not familiar with this model, but curious about only the upper notes being affected. You mention the block is reasonably flat, but is the plate also flat ?? Wouldn't a loose slide affect all notes ?
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: leaking slide = end of instrument?
« Reply #4 on: November 02, 2025, 04:29:46 PM »

Wouldn't a loose slide affect all notes ?

Depends on the quality of the channel. It can be particularly bad in one part of the block and not in the other.
There's a lot to be said about boxes without register switches... the reed dynamics seems to improve on piano.
I think adding a good register slider is an equivalent of drilling a 1mm hole through the casing in terms of air loss.
Logged

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: leaking slide = end of instrument?
« Reply #5 on: November 03, 2025, 08:21:52 AM »

mChavez: I think I’ll go for this option straight away. This would mean that the bassoon register would no longer be useable, but who uses that anyway? It solves another problem at the same time, which is that I’m short one register slide.
(I made the 8’ reed up to indicate the ‘eight foot register’. Does it mean something else maybe?)

Microbot: the slider is in the reed block itself.

Tirpous, I checked the bottom of the block with a metal ruler. I spot the leaking air on my tuning table, so I guess the bottom plate inside the instrument is not the problem.
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: leaking slide = end of instrument?
« Reply #6 on: November 03, 2025, 08:34:19 AM »

I merely jest at the idea of talking about 8 foot pipes in a squeezebox.
This is probably M (or "clarinet"). Or is it L ("bassoon")? I don't know - I don't own an organ (...yet).
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: leaking slide = end of instrument?
« Reply #7 on: November 03, 2025, 08:57:04 AM »

If the slider is completely enclosed in the base of the reed block there is one other possibility to tighten things up. 

Many Italian boxes with registers have a slide that runs in an open groove in the lower side of the reed block.  If these are loose it's usually possible to lightly sand the upstanding edges of the groove to reduce the clearance above and below the slide.  I wonder if you could sand off the bottom of the Hohner block to expose the slide and then take the edges down enough to tighten up the clearances?  I've not done this myself but it seems like it could be made to work.   You would need a very good flat surface to work on if sanding by hand, or a belt sander with a good flat bed.  Not all belt sanders are as flat as they should be. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: leaking slide = end of instrument?
« Reply #8 on: November 03, 2025, 09:23:44 AM »

Have you also checked that the Fondo / Soundboard is absolutely flat and not warped at all?
Logged

Toby B

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: leaking slide = end of instrument?
« Reply #9 on: November 03, 2025, 05:25:29 PM »

A bit a float glass is my very-flat surface ... use spray-mount to secure abrasive sheets
Logged

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: leaking slide = end of instrument?
« Reply #10 on: November 04, 2025, 02:57:46 PM »

Thanks again everyone! it seems i have jumped to conclusions too fast... turned out my tuning table (18mm plywood with another 18mm attached) isn't flat, which accounts for the leaking air. I will have to find a solution for that.
So I used wood filler to close the slider groove in every tone hole, and saw zero improvement on the leaking air. But it solved the problem of the missing slider.
another reason for the reeds speaking poorly was that most of the reed positions were off. The reason I did not start by checking them was that I found it improbable that a range of around 6 consecutive notes, pull and draw, should be off.
Although some reeds haven't improved much after repositioning, overall the M register is now kind of playable, and the 'tango' register sounds just fine.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal