Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Club IIIM questions  (Read 763 times)

0 Members and 1 Guest are viewing this topic.

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Club IIIM questions
« on: November 05, 2025, 07:58:48 PM »

Hi all, I just got hold of a Club IIIM. I just had to try one basically and it looked nice  8)

Anyway, as expected there are a few issues and questions since this is my first box with switches.

Firstly, the previous owner de-clubbed the box but didn’t do a great job, using a couple of old looking zinc plates which are quite out of place and tune. So I will need to replace them (if anyone has ‘T’ gleichtons from a previous declubbing let me know!). How do I remove the blocks from this thing? Is there a process to avoid damaging the sliders?

Secondly, when I select the L reedbank only, some of the M reeds sound along with the L reeds (around the middle register of the C row). Any idea what is causing this and any solutions? It’s not a problem with any other setting thankfully…

Cheers!



Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Club IIIM questions
« Reply #1 on: November 05, 2025, 09:14:27 PM »

There is also a note missing from the C chord (the c note). When I looked inside only 2 pallets were lifting when it should be 3. The mechanism looks too complicated for me so I will have to send the item back. How annoying!..

*it seems I have resolved this particular issue somehow now. The C note just started speaking. Good times (but still wanting to resolve other issues)!..
« Last Edit: November 05, 2025, 09:34:05 PM by Arnold »
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Club IIIM questions
« Reply #2 on: November 05, 2025, 09:48:02 PM »

The problem with the chord note was that the LH buttons had been limited to such an extent that the rod for the C note wasn't even engaged by the time the others had reached their limit. There is a surprising amount of discrepancy between each note being engaged. I suppose the little prongs (?) could be bent a bit to get them level but this seems a bit risky (my terminology is probably way off here so do correct me if you know what I'm talking about!..). Anyway I removed the limiter and this seems to have resolved this particular issue...
Logged
Dancing about architecture since 1997

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Club IIIM questions
« Reply #3 on: November 05, 2025, 10:08:12 PM »

I've broken 2 club boxes for part mostly for reeds and some buss buttons..  :o 3V and 2V is still club tuning I can arrange 2 MM c/c reeds but don't have any L reeds in club.
I still have the rest of them both if you need any more parts for it apart from the reeds of curse. 
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Club IIIM questions
« Reply #4 on: November 06, 2025, 06:33:42 AM »

I've broken 2 club boxes for part mostly for reeds and some buss buttons..  :o 3V and 2V is still club tuning I can arrange 2 MM c/c reeds but don't have any L reeds in club.
I still have the rest of them both if you need any more parts for it apart from the reeds of curse.

It would be great if you do have those MM reeds. I have a C/C reedplate from a spare C chord that should work for the 'L'... Thanks
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Club IIIM questions
« Reply #5 on: November 06, 2025, 07:40:28 PM »

Would anyone be able to advice me on how to remove the reedblocks from the Club IIIM? Also, any ideas what could be causing some of the M reeds to sound when only the L reeds are selected? Thanks
Logged
Dancing about architecture since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Club IIIM questions
« Reply #6 on: November 06, 2025, 08:34:30 PM »

Would anyone be able to advice me on how to remove the reedblocks from the Club IIIM?

There is a fixing screw in a small bracket at one end of the block.  Loosen the screw and swing the bracket out of the way.

Sometimes there are short metal bars wedged across the gap between blocks.  Mark where these are so you can replace them and remove them.

Lift the end of the loose end of the block block and withdraw the other end slightly.  You should see the end of the register slide(s) with the operating lever engaged in a slot at the end of the register.  Operate the the register switch to move the lever outwards then slip the end of the register under the lever to disengage.

Withdraw the block completely.

I usually place masking tape over the end of the registers so that they can't slide out unexpectedly and get damaged.

Quote
Also, any ideas what could be causing some of the M reeds to sound when only the L reeds are selected? Thanks

The register for the M reeds may not be closing properly
The register might be damaged, broken or part missing
the slot housing the slide could be warped or damaged
the reed block might be damaged
The fondo could be warped

You need to examine thread blocks and registers carefully once dismantled.
« Last Edit: November 06, 2025, 08:38:31 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Club IIIM questions
« Reply #7 on: November 06, 2025, 09:21:39 PM »

Thanks Theo, that's amazingly helpful. I'll hopefully get it apart at the weekend and at least get rid of the dodgy reeds (whilst hoping not to get wax everywhere!)

The questions keep coming... The button travel is quite severely limited. Is this normal, or another modification? Also, there is a springy sound when buttons are released. Any idea what this is? It sounds to me as if coming from the switches...

Logged
Dancing about architecture since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Club IIIM questions
« Reply #8 on: November 06, 2025, 10:55:18 PM »

I'd expect button travel to be 3 to 4 mm, but I don't know the factory setting for the IIIM.  I got one a long while ago, attracted by the couplers and the appearance, but mine always seemed rather quiet for a box with a lot of reeds. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Club IIIM questions
« Reply #9 on: November 07, 2025, 11:37:21 AM »

Arnold; I just tuned a Hohner III M, and I have taken out the blocks many times. In the beginning I was afraid to damage the register sliders. But if you follow Theo’s advice and push the register button to move the operating levers outward you can gently take out the reed block, whilst carefully eyeing the register slides and moving them away from under the operating levers.
Putting the blok back in is the reverse process: have the register slides sticking out three inches, make sure the operating levers are out, and fiddle them in the holes of the register slides and then gently slide the block back in place.
As for the key travel and springy sounds when releasing a key: I just checked, and only a few keys have a bit of this springy sound if I let go of them quickly. But I never noticed before.
Key travel on my box (and the previous identical model I’ve sold) is just as it should be. Most Hohners I’ve met had too much key travel; maybe someone’s tried to limit it?
In my opinion, this box is worth putting work into; the 4 voice bass sound is huge, the reeds have a pleasant sound and having a tango and musette register is great too. But being a big box with probably some air leakage due to the register slides, it is not the most nimble box for fast playing.
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Club IIIM questions
« Reply #10 on: November 07, 2025, 07:28:11 PM »

I'll have to take the grill and under keyboard cover off at some point. I know something has been done because the screws are in slightly random positions (some round, some flat). Thanks Willam, I am double reassured about removing the blocks now!..

I wasn't sure whether I'd like the box, I just like to try different things, and then move them along if they're not for me (patching up any problems along the way). I've been wanting to try a Club IIIM for ages. I'm working on making it more responsive too (gapping the reeds). Are the earlier similar clubs eg IIIBS considered superior?
Logged
Dancing about architecture since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal