Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Carona 111 bellows repair  (Read 874 times)

0 Members and 1 Guest are viewing this topic.

BoxPlayer

  • Member
  • *
  • Offline Offline
  • Posts: 31
Carona 111 bellows repair
« on: November 15, 2025, 08:30:49 PM »

I am following a repair presently being discussed on ‘accordionistsforum’ where one of the bellows frame has become cracked, the cracks emanating from one of the bellows pin holes.
I am surprised (in my ignorance no doubt) that the bellows frame is not wood but plastic. According to Hohner lists I have access to the Coronas are quite old, pre-dating plastic construction parts.
Has the Corona perhaps been produced in a more modern model, perhaps being made in China?
Any comment from the enthusiasts and experienced people on this site would be most welcome.
Thanks in anticipation.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Carona 111 bellows repair
« Reply #1 on: November 15, 2025, 08:44:21 PM »

Hohner have used plastic bellows frames since the 1970s when production was in Germany.

The Corona is Hohner's biggest selling melodeon worldwide, most of their market is in Latin America.
The standard Corona is made in China while the more upmarket Corona Classic is still made in Germany.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Carona 111 bellows repair
« Reply #2 on: November 16, 2025, 08:27:15 AM »

Hohner making boxes in Germany is news to me - afaik, they outsourced their PA, CBA and top line Clubs production to Italy (Cemex Excelsior) in mid 1960s, and lost most/all of the expertise that came with high end accordion manufacturing and reed making (which was in severe decline due to cost cutting anyway).
The cheap stuff got outsourced to China at some later point.
It wouldn't make sense to outsource the best and keep making individual mid-level models at home with inflated costs, when everything else is gone ???. But I only know about their high end stuff, so  I might be wrong.

There was a period in 60s-70s when they proudly stamped "Made in Germany" on the back of the keyboards, because that little celluloid back plate was the only part made in Germany - it would be illegal to stamp "made in Germany" on anything else.

« Last Edit: November 16, 2025, 08:42:49 AM by mChavez »
Logged

BoxPlayer

  • Member
  • *
  • Offline Offline
  • Posts: 31
Re: Carona 111 bellows repair
« Reply #3 on: November 16, 2025, 11:11:24 AM »

Thanks rees.
I have dabbled in accordion repair for the best part of fifty years, predominately piano and CBA but not exclusively. I don't recall seeing any Hohners, of any sort, with plastic bellow frames. Maybe my memory is going. Wouldn't be surprised.....
Logged

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Carona 111 bellows repair
« Reply #4 on: November 16, 2025, 11:30:32 AM »

While hunting around for 40/48 bass mechs. to to attach to a 2.5 or 3 row treble side, I discovered that the Hohner Starlet (PA) had plastic bellows frames - so avoided them after that.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Carona 111 bellows repair
« Reply #5 on: November 16, 2025, 11:31:49 AM »

Most, maybe all, two voice 8 bass Hohners from the 80s and 90s that I’ve seen have plastic bellows frames.  When production moved to China in 2000 they went back to wood.  I don’t think I’ve seen plastic frames on any of the larger models.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

BoxPlayer

  • Member
  • *
  • Offline Offline
  • Posts: 31
Re: Carona 111 bellows repair
« Reply #6 on: November 16, 2025, 12:02:45 PM »

Thanks all. All very helpful information.
As I explain at the head of this thread the problem is that a plastic bellows frame on a Corona 111 has developed a crack, centred on a bellows pin hole.
I believe with the correct glue, a bit of preparation and ‘sling’ made to hold the frame firm for 24 hrs or so, the repair can be as strong, or stronger, than the original component.
I use a range of glues depending on the material etc. but plastics bring in another complication and any comments would be welcome.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Carona 111 bellows repair
« Reply #7 on: November 16, 2025, 12:06:26 PM »

If I was doing this repair I would put a splint along the edge of the frame above the pin hole.  Preferably made of a plastic that will allow you to use a solvent cement.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

BoxPlayer

  • Member
  • *
  • Offline Offline
  • Posts: 31
Re: Carona 111 bellows repair
« Reply #8 on: November 16, 2025, 01:48:15 PM »

Theo,
I had that ‘splint’ in mind as well as a ratchet type strap round the outer edge of the frame, all after the glue has been applied.
Can you give me commercial name examples of ‘solvent glues’ ?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Carona 111 bellows repair
« Reply #9 on: November 16, 2025, 02:11:47 PM »

I don’t know the names, but solvent cement is widely available in the plumbing trade for joining pvc pipes.
For example  https://www.toolstation.com/pvc-pipe-solvent-cement/p70177
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

BoxPlayer

  • Member
  • *
  • Offline Offline
  • Posts: 31
Re: Carona 111 bellows repair
« Reply #10 on: November 18, 2025, 06:34:26 PM »

Thanks Theo. I’ll pass that on.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal