Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Stiff treble spring on Gremlin D/G  (Read 595 times)

0 Members and 1 Guest are viewing this topic.

Ed Rennie

  • Good talker
  • **
  • Offline Offline
  • Posts: 82
Stiff treble spring on Gremlin D/G
« on: November 20, 2025, 08:35:36 AM »

Good morning (well, it is here in Devon)

Last night, one of my students (who has been using one of my Loaner Hohners) whipped out a box they had bought over the summer. It was a red Gremlin pokerwork knock off with a flat grille with no discernible fixings. They had been directed towards it by a fettler who said that in the event of it needing repairing, they wouldn't touch it, which struck me as a curious way to behave.

Anyway, apart from the bass strap being so tight there was barely enough room to get a fag paper through, the treble end played fine. I was able to knock out a tune without Herculean effort. However, one of the buttons (B/C on the G row for the curious) was very, very stiff to play.

So, here's my question. How the dickens do you get into these things? The grille, which is a flat plate and as I said, had no visible fixings and seemed to slide back and forth a little, seemingly only held in place by the metal corners (a la Pokerwork metal corners) and the finger board.

Protruding from the fingerboard is the end of a metal rod, which makes me think the whole button/pallet mechanism is connected to the finger board, rather than screwed to the fondo. That's going to make life interesting.

So, any light anyone can shed on this would be gratefully received.

It would also be helpful if we could dispense with the hilarious japes about Gremlin boxes, irresistible though these may be. They parted with money for this thing and, if this button can be sorted, it will be a reasonably playable box to be going on with and I'd like to help this come about. They are aware that this particular genre is a hissing and a byword in some quarters. Indeed, had I been involved I'd have given a "Yeah. No, I'd advise against that" but we are, as they say, where we are.

Many thanks

Ed
« Last Edit: November 20, 2025, 08:46:02 AM by Ed Rennie »
Logged
There's a lot more goodies in the pipeline ...

Andy Goldfinch

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 150
    • Andy Goldfinch Melodeon (YouTube)
Re: Stiff treble spring on Gremlin D/G
« Reply #1 on: November 20, 2025, 08:49:16 AM »

I've also got one of those cheap Gremlin boxes, which I bought to learn some fettling basics on. The only way I've found to get the grille off is to take the bellows off, then undo the 2 screws inside the treble end that hold the keyboard on.

The mechanism is indeed built into the keyboard, and I never managed to find a good way to limit button travel because of this.

I agree that for the price it's an ok box, I've ended up lending mine to a beginner who went to your Squeezebox From Scratch workshop at Shrewsbury this year.
Logged
D/G Castagnari Dony, D/G Hohner Club VII (9 bass), D/G Serenellini Maestro, C/F Hohner Club II (DIY restoration in progress...)

https://www.youtube.com/@andymelodeon

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Stiff treble spring on Gremlin D/G
« Reply #2 on: November 20, 2025, 08:54:39 AM »

Ed,  I’ll try and advise but there may not be a simple answer.
Your description of the grill makes me think this is probably made in GDR.  Gremlin is a brand name used by Hobgoblin Music, and they have used various different manufacturers.
If that’s correct then changing the spring could be challenging.  Usually these have a keyboard that has a textured black finish and looks as if it’s been moulded in some way,  though underneath the black finish it’s made of wood.

So why would one key have a stronger spring?  Has the spring been replaced? The springs on the typical GDR keyboard are almost inaccessible, so it’s possible a spring has broken and there is an improvised replacement.  To understand more you will need to remove the grill.  It’s crude, just get something thin under the edge near the centre and lift. The grill should bend enough to allow the front corners to release. Then you can look for an improvised spring.  You won’t see the originals, they are hidden inside the keyboard.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Stiff treble spring on Gremlin D/G
« Reply #3 on: November 20, 2025, 10:14:00 AM »

The grill should come off. It is held with two tiny screws where the hohner pins are and by the corner decorative slides you will need to remove these push forward or bend grill and risk damage . The key board will loosen the same as a hohner with the long internal screws at each end inside. However you will not be able to remove it over the buttons.If one button is stiff in my opinion it has been dislodged or the pivot in the wood has swollen could be either.If its been replaced I would expect signs of marking on the box.

To access the springs is difficult but not impossible. Several ways. One you have to remove the buttons and then re-glue on reassembly.. Two you need to remove the entire axle all the key levers are on and reassemble, night mare. Two remove the front of the keyboard as you would with a hohner liliput.  unlike hohner it is not screwed on but you need to break the glue joints. It is worse if the key board is covered in plastic as this must be removed and then you will need to refinish the wood.

Imho if a spring is broken it may be easier to improvise a spring lever end under grill as in the emergency balloon elastic band repair it with a spring type repair
You may find that long periods of pressing the offending button might loosen it and it could be one of the exception to the rule were you could try a drop of oil.Also let the instrument dry out and see if use improves the situation as these boxes are prone to this after being unused for years.

If you do access the keyboard front you have to slip the spring compressed in and out under the lever which is quite trikey

This fault is the main reason that these boxes are given up on but in good condition the are almost as good as hohners if not different it just that the biuld quality is much lower and servicing keyboard is hard.
Logged
Mark Taylor
Folkloristmark

Helena Handcart

  • Hero Member
  • *****
  • Online Online
  • Posts: 2452
  • Saltarelle Nell
Re: Stiff treble spring on Gremlin D/G
« Reply #4 on: November 20, 2025, 10:33:05 AM »

I agree that for the price it's an ok box, I've ended up lending mine to a beginner who went to your Squeezebox From Scratch workshop at Shrewsbury this year.

A fine and noble thing to do with the box. Those Shrewsbury workshops were a lot of fun.
Logged
Saltarelle Le Romané  | Saltarelle Nuage | Oakwood | various elderly Hohners
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal