Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: C/F Presswood  (Read 3407 times)

0 Members and 1 Guest are viewing this topic.

Ziachmusi/Louise

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 400
C/F Presswood
« on: December 21, 2009, 12:06:34 PM »

I'm now a proud owner of a 1950's Presswood Hohner. Has a bit rust on the metal bits but all buttons and machanics seem OK. The bellows have a nasty corner so I have to fix them. I've been looking through the old threads to see what help is available. But I'm sure I'll have loads of questions.

The best reaction so far was my local accordeon tuner/repairer. Here in Germany you either drive a Mercedes or a 2CV that you then scrap when  the first oil change is due ( because the cost of an oil change would be higher than the 2CV is worth). The reaction to my scrap box was
 
a: never buy anything off Ebay
b: New Bellows would cost at least 250€
c: the cost of any work done on it would far exceed the worth of the Box so why bother.
d: my invested 100€ was a mistake and i should dump it.

I must say that this is exactly what I was expecting and that he was in no way unfriendly he just thought I've lost my marbles. In the end he did say he was willing to have a quick look and can supply me with bellow corners, tape etc.

My first two questions:- the reeds are marked "H", I'm sure this has been asked before but what does that mean and secondly two of the holes under the pallets on the Treble end have been partially covered with sticky paper - any known reasons why any one would want to do this?

I'll try and do some photos later

thanks

Louise
« Last Edit: December 21, 2009, 12:09:16 PM by ziachmusi »
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: C/F Presswood
« Reply #1 on: December 22, 2009, 07:44:45 PM »

I have virtually the same accordeon, rust free... I paid $100 US  earlier this year.

Which 2 holes are blocked ?

Wait and buy one in better condition cheaper and blend the two together to get one decent accordion

A 2CV in the States in running order would be around 3500 Euros
A decent one  5000 Euros
and a later model "Charleston" would be about 7000 Euros.

Mercedes are a dime a dozen....(plentiful and cheap)
« Last Edit: December 22, 2009, 07:47:01 PM by melodeon »
Logged

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: C/F Presswood
« Reply #2 on: December 22, 2009, 11:15:40 PM »

HI, Louise, and congratulatios on your new C/F presswood!

I have one of the exact same, and it has grown to be my favorite instrument. It arrived here as an ebay junker, potentially for parts for one or another projects. But when I opened the carton, it became a restoration effort, and I wouldn't part with it now for anything. (And I have subsequently done another of the same for a friend of mine.)

I can't offer answers to your question about the "H" reeds (I'm sure someone here will know that) or as to why any of the holes would be just partially covered. But if you are interested, I will post a link to  photos of my project boxes.

As far as the comments you got from your repairer:
 
a: "never buy anything off Ebay" -- Got mine from ebay. And while I did lavish lots of new parts on it, and do a lot of labor, it's now an instrument I'll likely own for life. Ditto for my friend's.

b: "New Bellows would cost at least 250€" -- Does it really need new bellows? Sometimes wheeziness can be cured by something as simple as new gasket, or other simple fixes. (I bought some new Erica bellows from Frank Romano in Canada for about $250 U.S.)

c: "the cost of any work done on it would far exceed the worth of the Box so why bother." -- Because you love the thing. You're not doing this for its investment value.

d: "my invested 100€ was a mistake and i should dump it." -- Kind of depends on its overall condiditon, I guess. Mine arrived with reeds rattling around inside, worthless bellows, and far from being a beauty queen.

If there's any help or encouragement I can offer, I'm happy to do so. And I'll see if I can't post a link to some photos.

Good luck!

Bob
Logged

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: C/F Presswood
« Reply #3 on: December 23, 2009, 05:41:04 AM »

P.S.

>".........I've lost my marbles."

Welcome to the club!

Bob
« Last Edit: December 23, 2009, 05:44:31 AM by RGF »
Logged

Ziachmusi/Louise

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 400
Re: C/F Presswood
« Reply #4 on: December 23, 2009, 10:25:14 AM »

Thanks for the encouragement guys, much appreciated :|||:
I've attached some fotos of my now dismantled box.
The worn bellow corner:- should I patch it on the inside and then renew bellow paper, corner and tape or should i only renew the bellow paper, corner and tape?
The reeds have quite a bit of rust, what is the best method of removing it? I understand that they are tuned by filing does that mean the tone can only be changed in one direction (when yes will they get sharper or flatter?) and will scratching or sanding of the rust make them non tuneable?
The two covered holes are both on the C row do you think I should remove the paper or leave it be?

thanks for all help and support
merry Christmas to one and all

Louise
« Last Edit: December 23, 2009, 10:28:28 AM by ziachmusi »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: C/F Presswood
« Reply #5 on: December 23, 2009, 10:39:01 AM »

The worn bellow corner:- should I patch it on the inside and then renew bellow paper, corner and tape or should i only renew the bellow paper, corner and tape?
patch on the inside with thin card, cut to the same angle as the existing card and fitted in to the corner without covering the leather gusset.  Then replace the metal corner.  If you need a new metal corner these are available and only cost a few pence/cents
Quote

The reeds have quite a bit of rust, what is the best method of removing it? I understand that they are tuned by filing does that mean the tone can only be changed in one direction (when yes will they get sharper or flatter?) and will scratching or sanding of the rust make them non tuneable?
If the reeds are somewhere near in tune its probably not worth removing the rust you can see.  There are more reeds on the underside of the reedplates that you can not see, and there is not much to be gained by only doing half the reeds! 

Reeds can be tuned up by filing near the tip, or tuned down by filing about 2/3ds of the way down

Quote
The two covered holes are both on the C row do you think I should remove the paper or leave it be?
Remove the paper.  You might then find that those notes are badly out of tune.   If you want to (temporarily) block off those reeds again a better way is to take out the reedblock and put tape over the hole on the underside.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal