Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner 2815 Chord reeds - need feedback  (Read 971 times)

0 Members and 1 Guest are viewing this topic.

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Hohner 2815 Chord reeds - need feedback
« on: November 23, 2025, 06:49:32 PM »

I bought a used Hohner 2815 earlier this summer; all "H" reeds, but quite a few of the valves came off as a result of very poor shipment packaging. As far as I could tell when I opened it up (after receiving it back in August) it had never been opened before; no previous "shadows" around screw heads, air chest gaskets looked undistured, extremely clean on the inside, etc.. Other than the valves, it seemed to be in very good condition.

I thought I could do the work myself, but it would have been my first attempt, so I let valor take the back seat to discretion, and shipped it off for repair here in the States.
The work I initially requested was to just replace the dislodged valves, but after inspection I was told that much of the wax around the plates was brittle and in need of replacing, and since many of the valves were "inside" I opted to have them all removed, cleaned, new valves installed, and new wax all around.

Before sending it out for work, I didn't spend much time 'playing' this instrument because I didn't want to exacerbate any unknown damage.  I was anticipating an essentially restored melodeon.
That is mostly what I got.

Overall intonation is acceptable, but it is the G+/D+ chord that I'm concerned about.  I don't know what chord it is sounding but it doesn't resonate well with the adjacent G|D bass button; the insTuner™ app reads B/D (?!?).  I'm wondering if the reed was incorrectly installed. Really, I'm clueless.

IN FAIRNESS: I received the shipment Friday afternoon (11.21.2025), and have not yet contacted the shop.

I would like your observations, and welcome any comments so that I have some 'talking points' to share with him.

Here's a short YouTube, recorded on my iPhone; not exactly 'studio', but it's the best I have.

https://youtu.be/R_ZLpcbAh70

Bass: C/G, then Chord: C+/G+, then both played together (0:01 - 0:14)
Bass: F/F, then Chord F+/F+, then both played together (0:15 - 0:27)
Bass: E/A, then Chord E+/A+, then both played together (0:27 - 0:42)
Bass: G/D, the Chord G+/D+, then both played together (0:42 - 0:56)

Thanks.





« Last Edit: November 23, 2025, 06:51:03 PM by Lew Morris »
Logged
"It's what you learn, after you know it all, that counts." John Wooden

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner 2815 Chord reeds - need feedback
« Reply #1 on: November 23, 2025, 07:00:30 PM »

I've just listened to the recording.

Easy bit first the A chord is minor, but that is normal.

The G/D bass is good, it's the chords that are not right.  I suspect that one of the reed plates has been installed upside down so a pull reed is sound on push and vice versa.   Look at the chord block and see if one of the reed plates does not have a T or H showing. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Hohner 2815 Chord reeds - need feedback
« Reply #2 on: November 23, 2025, 07:15:42 PM »

Theo's right.
"G chord" is F♯ B D, should be G B D
"D chord" is G A D, should be "F♯ A D"

So the G and F♯ reed plate is most likely back to front.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: Hohner 2815 Chord reeds - need feedback
« Reply #3 on: November 23, 2025, 09:10:37 PM »

Quote
Look at the chord block and see if one of the reed plates does not have a T or H showing.

Quote
So the G and F♯ reed plate is most likely back to front.

And so it was.
Back to the shop, on the far side of the country ... I'll just send the base-end this time, instead of the entire instrument. I could muddle through it, but I'd rather not disturb his work.

A catchphrase from the American 1960s Don Adams comedy show Get Smart, come to mind,"...missed by that much."

Thank you gentlemen!

« Last Edit: November 23, 2025, 09:21:48 PM by Lew Morris »
Logged
"It's what you learn, after you know it all, that counts." John Wooden

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Hohner 2815 Chord reeds - need feedback
« Reply #4 on: November 27, 2025, 12:22:50 AM »

Honestly, I'd be tempted to tackle a plate flip yourself rather than shipping and waiting. Pretty easy stuff with a careful rewax with a soldering iron.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner 2815 Chord reeds - need feedback
« Reply #5 on: November 27, 2025, 05:10:30 AM »

Or if you don’t want to flip the reed yourself, don’t sent the whole instrument back,  just send the chord reed block.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner 2815 Chord reeds - need feedback
« Reply #6 on: November 27, 2025, 09:17:48 AM »

It's a simple error compounded by not checking the chord sounds after waxing.
An easy mistake that I did once, and never again!
I appreciate that it's a finished product that should be right, but it's such a straightforward job to do yourself. Just flip it and touch a warm, not HOT, soldering iron on the wax.
Less than an hour and you'll be playing.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner 2815 Chord reeds - need feedback
« Reply #7 on: November 28, 2025, 06:22:16 PM »

I have to say I never send an instrument back without giving it a good old test drive first. Many a problem has been uncovered this way. So it's sad that whoever did the work didn't take the time to play it.

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: Hohner 2815 Chord reeds - need feedback
« Reply #8 on: November 30, 2025, 12:42:08 AM »

Quote
So it's sad that whoever did the work didn't take the time to play it.

I just sent the reed block. I could have taken a shot at flipping the plate, but I greatly dislike messing with someone else's work. 

They were thoroughly embarrassed, to put it mildly.  They are picking up the 2-Day return shipping both ways, and asked me if a 50% refund would be acceptable. I said that would.

The Thanksgiving holiday here, will probably hinter the turn-around, but I should have it back by December 3.
Logged
"It's what you learn, after you know it all, that counts." John Wooden

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner 2815 Chord reeds - need feedback
« Reply #9 on: November 30, 2025, 11:15:55 AM »


They were thoroughly embarrassed, to put it mildly.  They are picking up the 2-Day return shipping both ways, and asked me if a 50% refund would be acceptable. I said that would.


Anyone can make mistakes.

That sounds like a repairer who cares about their reputation. A valuable resource.  Put them in your address book!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: Hohner 2815 Chord reeds - need feedback
« Reply #10 on: November 30, 2025, 05:41:20 PM »

Quote
Anyone can make mistakes.

I generally have no problems with folks making mistakes, as long as no blood involved.  ;)

I just got an email from the shop last night; they received the block Saturday afternoon, flipped the reed, and re-tested the entire set. It's ready to be dropped off at the UPS station in the morning.

My next issue will be trying to transition from my old 114/c to this 2815/gc.
Logged
"It's what you learn, after you know it all, that counts." John Wooden
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal