Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: What dpoes the Grille actually do? Can I replace it?  (Read 1735 times)

0 Members and 1 Guest are viewing this topic.

Roger Dunham

  • New Starter
  • Offline Offline
  • Posts: 2
What dpoes the Grille actually do? Can I replace it?
« on: December 11, 2025, 10:41:39 PM »

I'm looking at options for attaching a gooseneck microphone to my box. Ideally in a non-permanent way
One of the many options would be to create a new grill that I can then permanently attach the microphone (possibly more than one) to.
But I'm not sure what the grille does other than let the sound out and stop dog hairs getting in.
Is this stupid idea of the year (at least I waited until December to give others a chance)? Or does it have some merit?
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: What dpoes the Grille actually do? Can I replace it?
« Reply #1 on: December 11, 2025, 10:48:34 PM »

I remove the grill on all of my accordions. I find it does nothing except muffle the sound of the box to varying degrees. I feel they generally sound better without them.
Logged
C#/D player

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: What dpoes the Grille actually do? Can I replace it?
« Reply #2 on: December 11, 2025, 11:07:19 PM »

It's a matter of personal preference. With some rare exceptions I find accordions sound much more shrill without the grill, I find the sound to be more balanced and pleasant with it. In the end it's a pivotal piece to design what sound an accordion has.
But regardless, it's possible to make a slot in a grill to let you hold the microphone if it has some clamp or something?
On my Handry I usually clamp my microphone on the bellows fastener, the mic at the end of the gooseneck is thus positionned at roughly the third of the box height, pointing downwards. With a proper sound setting it's covering all of my needs.

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: What dpoes the Grille actually do? Can I replace it?
« Reply #3 on: December 11, 2025, 11:30:23 PM »

It's often possible to clip a gooseneck mic to the bellows strap, or to install a bracket somewhere. Seems to me it's simpler to clip on and off a mic designed for that very purpose (as opposed to swapping grilles with their small screws or other attachment method not designed to be done/undone regularly).

The grille protects and hides the pallets, protection not just from dust but accidental knocks. There is also a decorative factor, pallets can be as crude as they like when hidden, attached with ugly melt glue and whatnot.
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: What dpoes the Grille actually do? Can I replace it?
« Reply #4 on: December 12, 2025, 10:30:21 AM »

Grille acts as a sound filter because the sound waves bounce under it. Grilles can be roughly categorised into 3 acoustic designs:
1) Open - as little interference as possible.
2) Closed - significant sound impact, with no (or almost no) way for the sound to directly escape from under the grille. Cheesegrater designs fall into this category too.
3) Semi-closed. Some filtering of high partials, but there's enough sound escaping directly so that the grille does not have as strong an effect as a closed one.
Logged

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: What dpoes the Grille actually do? Can I replace it?
« Reply #5 on: December 12, 2025, 10:52:54 AM »

It's a matter of personal preference. With some rare exceptions I find accordions sound much more shrill without the grill, I find the sound to be more balanced and pleasant with it. In the end it's a pivotal piece to design what sound an accordion has.
But regardless, it's possible to make a slot in a grill to let you hold the microphone if it has some clamp or something?
On my Handry I usually clamp my microphone on the bellows fastener, the mic at the end of the gooseneck is thus positionned at roughly the third of the box height, pointing downwards. With a proper sound setting it's covering all of my needs.

Most definitely. I have a microbot Erica where he added layers of linen hanky  :M to the grills, (bass side too).  Part of the sound  package.

Like mChavez notes it captures the errant high overtones and such.  Or it could be magic.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: What dpoes the Grille actually do? Can I replace it?
« Reply #6 on: December 13, 2025, 03:56:22 PM »

It's a matter of personal preference. With some rare exceptions I find accordions sound much more shrill without the grill, I find the sound to be more balanced and pleasant with it. In the end it's a pivotal piece to design what sound an accordion has.

This is actually a very good point (I had meant to touch on this in my original response). I shouldn’t have said that I find the lack of grill makes for a ‘better’ sound, but rather louder/clearer. As -Y- has pointed out, that can actually make for a more shrill sound. It really does come down to personal preference. Now that I think of it, I do have one box which could be considered a bit shrill without the grill. Thanks for making this point.
Logged
C#/D player

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: What dpoes the Grille actually do? Can I replace it?
« Reply #7 on: December 13, 2025, 07:30:33 PM »

But regardless, it's possible to make a slot in a grill to let you hold the microphone if it has some clamp or something?

It'd be easy enough on my Hohner – grille's made of ferrous metal, so a couple of neodymium magnets would hold a mic on. Even very small ones have a remarkably strong hold.
Logged
Vintage Double Ray C#/D

gunchki

  • Member
  • *
  • Offline Offline
  • Posts: 17
  • blowing on the suck
Re: What dpoes the Grille actually do? Can I replace it?
« Reply #8 on: December 13, 2025, 09:23:34 PM »

Along with the grille cloth it seems to act mostly as a line of defense from getting cigarette ashes sucked into the valves.
Logged

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: What dpoes the Grille actually do? Can I replace it?
« Reply #9 on: December 14, 2025, 01:39:02 PM »

Have seen heavy duty velcro used.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: What dpoes the Grille actually do? Can I replace it?
« Reply #10 on: December 14, 2025, 09:26:42 PM »

I have a couple of T-Bone gooseneck mics and attach with velcro, one on each side. The treble mic is stuck onto the grille. A grille generally is there to protect the mechanism underneath, obviously. You don't need it, per se, but it may alter the sound on and off. If it restricts air flow that is bad, so it lets air pass through. Some Hohner PA (normally the Atlantic) actually have a little roller shutter thing inside the grille to mod the sound, and others have "mutes' that swing open like little dustbin lids and this alters the sound too. So obvs if you remove a grille it will change the sound.

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: What dpoes the Grille actually do? Can I replace it?
« Reply #11 on: December 15, 2025, 11:20:34 AM »

For the bass end velcro cable ties around the hand strap can hold a gooseneck mic in place.

The treble side is more difficult. Velcro is one option, although it can leave a residue especially if it is left in place for a long time.  AKG provide a sticky putty with their mics, which is removable. Both are reasonably effective, although the mics can work a little loose if you're too vigorous.

I took the plunge and permanently fixed mounting brackets onto my box. The case is black, so the black brackets aren't very conspicuous. However the screws have permanently damaged the box, but it was already fairly battered after several decades of use so I wasn't too precious about it, but I quite understand you don't want to do this. If you don't want to permanently alter your instrument then fixing the mic to a replacement grille seems like a good approach, and you would still have the original grille should you want to sell the instrument in future.

If it is a simple copy of the original then I doubt you would notice much difference in sound. Replacing a metal grille with a wooden one (or vice versa) might affect the tone, as might a different design.

Helena Handcart

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2452
  • Saltarelle Nell
Re: What does the Grille actually do? Can I replace it?
« Reply #12 on: December 15, 2025, 12:04:09 PM »

If your box is the sort with a second press stud to hold the bellows strap in the open position then you could try clipping a goose neck microphone to that for the treble end. After moving on from a microvox kit with velcro pads that's what I do these days. For the bass end I use a clip-on 'tie' mic clipped to the underside of a wristband. It's a simple solution, allows me to change boxes easily and doesn't require any marking or customisation to my boxes.
Logged
Saltarelle Le Romané  | Saltarelle Nuage | Oakwood | various elderly Hohners

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: What does the Grille actually do? Can I replace it?
« Reply #13 on: December 15, 2025, 12:26:47 PM »


for the bass end I use a clip-on 'tie' mic clipped to the underside of a wristband. It's a simple solution, allows me to change boxes easily and doesn't require any marking or customisation to my boxes.

As long as you remember to remove the mic before you leave the stage. I speak from personal experience!  ;D

Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Helena Handcart

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2452
  • Saltarelle Nell
Re: What does the Grille actually do? Can I replace it?
« Reply #14 on: December 15, 2025, 02:40:35 PM »

As long as you remember to remove the mic before you leave the stage. I speak from personal experience!  ;D

Fortunately it's a wired mic so I wouldn't get far  :o
Logged
Saltarelle Le Romané  | Saltarelle Nuage | Oakwood | various elderly Hohners

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: What dpoes the Grille actually do? Can I replace it?
« Reply #15 on: December 15, 2025, 04:19:09 PM »

It's a matter of personal preference. With some rare exceptions I find accordions sound much more shrill without the grill, I find the sound to be more balanced and pleasant with it. In the end it's a pivotal piece to design what sound an accordion has.

Like mChavez notes it captures the errant high overtones and such.  Or it could be magic.

Wish it would "captures the errant tones"    :)
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Roger Dunham

  • New Starter
  • Offline Offline
  • Posts: 2
Re: What dpoes the Grille actually do? Can I replace it?
« Reply #16 on: December 20, 2025, 07:31:28 PM »

Thanks everyone for the replies.
The current solution is to extend the mike with the metal sleeve from a bolt for holding things in concrete, wedged into the gap between the bellow strap and the stud. I can see a number of problems with that, but it's a good starting position.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal