Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Broken foot - How can I extract the screw?  (Read 552 times)

0 Members and 1 Guest are viewing this topic.

Robin

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 101
Broken foot - How can I extract the screw?
« on: December 20, 2025, 07:44:08 PM »

Hello there,

I recently bought a second-hand Beltuna Sara II with a missing foot.
I also bought a suitable replacement foot. But I hadn't realised that the original foot must have been brocken and that the screw remained in the wood...

I'm hoping to find a way to remove the screw without damaging the wood. Has anybody ever had to solve a similar problem?
Advice would be much appreciated  (:) !

Robin
Logged

Toby B

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Broken foot - How can I extract the screw?
« Reply #1 on: December 20, 2025, 09:33:13 PM »

You can use a broken screw removal tool (also broken tap removal ... different from the drill bits for removing larger bolts, etc)

eg https://www.amazon.co.uk/Tap-Extractor-Broken-Remover-Stripped

They are a cylinder chosen so the broken screw will just fit inside the tube.
There are cutting saw teeth on the ebnd
You mount it in a drill and carefully advance down until you are able to pull out the broken screw shank and a small amount of wood
You then plug the hole with a suitable bit of dowel glued in
Once dry, you can re-drill for the new screw to replace the foot
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Broken foot - How can I extract the screw?
« Reply #2 on: December 20, 2025, 09:49:51 PM »

If you can find a short length of steel tube which the screw will fit inside you can make your own tool by filing some teeth on the end.  You are only removing a tiny amount of wood so the teeth don’t have to be proper saw teeth, just  a series of notches will work.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 325
Re: Broken foot - How can I extract the screw?
« Reply #3 on: December 21, 2025, 11:46:41 AM »

For one-off use you dont need steel tube. Ive used brass tube, sold in model shops in an wide array of sizes, for this.
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

Robin

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 101
Re: Broken foot - How can I extract the screw?
« Reply #4 on: December 22, 2025, 09:44:30 PM »

Apologies for the slow reply... Thanks a lot for your pieces of advice !!  :||:



« Last Edit: December 22, 2025, 09:51:57 PM by Robin »
Logged

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: Broken foot - How can I extract the screw?
« Reply #5 on: February 07, 2026, 08:15:30 PM »

Late to the party.

With a bit of luck, the end of the screw may be protruding into inside of the box.  Pull the end off and check if you can grip it with pliers and screw it all the way to the inside.

Logged
"It's what you learn, after you know it all, that counts." John Wooden
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal