Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Shoulder strap bracket - screw length?  (Read 749 times)

0 Members and 1 Guest are viewing this topic.

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Shoulder strap bracket - screw length?
« on: December 23, 2025, 10:47:36 PM »

I finally got my Levy shoulder straps, and the V-brackets, so it's time to fit the brackets onto my Hohner 2815.

Lester's video revealed that I wouldn't hit anything vital, but left out screw size, and length information.

The brackets that I have do not have countersunk holes (the stamped base material is thin), so I will need to use round head screws.

#2 seems to small, and #4 seems like overkill

Length; my guess would be 3/8" [10mm]

Surprisingly, I couldn't find anything small enough at my local hardware store, so I'll have to order them.




Logged
"It's what you learn, after you know it all, that counts." John Wooden

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Shoulder strap bracket - screw length?
« Reply #1 on: December 24, 2025, 07:43:23 AM »

fwiw, I use similar brackets and I ream mine out + lightly countersink them to take the most aggressive wood screw I can find. I don't want a tiny screws pulling out and messing up the holes.

For the length, I just open the box and see what will work and what won't.
Logged

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: Shoulder strap bracket - screw length?
« Reply #2 on: January 03, 2026, 11:58:35 PM »

Ref. for anyone else.

#3 x 3/8" [9.5mm] worked out just right.

#3 seems to be an oddball size (#2 and #4 are more common), I found them at a guitar store (used to mounting the tuning capstans)
Logged
"It's what you learn, after you know it all, that counts." John Wooden

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: Shoulder strap bracket - screw length?
« Reply #3 on: January 07, 2026, 09:08:21 PM »



I mounted the lower strap bracket on the "bottom" end. Single strap playing; no problems.  But two minutes of playing, with two straps, immediately revealed that this was mistake; the bottom left-side strap drags on the bellows.

Perhaps I should have mounted the lower bracket on the lower edge of the bass end of the box.

Time to figure out how to plug the three holes, in something like a workmanlike manner.

The best laid plans.. .. 
Logged
"It's what you learn, after you know it all, that counts." John Wooden

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Shoulder strap bracket - screw length?
« Reply #4 on: January 17, 2026, 01:14:45 AM »

This is not "a mistake" ... 99% of melodeons I have ever seen from every manufacturer have strap brackets in the position you show.

I have seen and played some unusual instruments with the alternative you circle in red and I have to say that the balance of the instrument in those cases made the angle and position of the instruments more awkward to play.

I don't know of a strap system which doesn't come in contact with the bellows of the instrument.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Shoulder strap bracket - screw length?
« Reply #5 on: January 17, 2026, 08:18:47 AM »

A lot of accordions (PAs and CBAs) have the bracket in the circled position. That's where I put mine on hromkas too.
Never noticed any balancing problems.

PS them tiny screws for mounting guitar tuners are not designed to take any load and I personally wouldn't trust them to hold down a strap bracket.
« Last Edit: January 17, 2026, 08:20:52 AM by mChavez »
Logged

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Shoulder strap bracket - screw length?
« Reply #6 on: January 17, 2026, 11:41:02 AM »

Don't do it Lew.
The angle of tension will pull the bracket right out. Ugly.
And what Chavez sez: need more aggressive screws. You probably have room for #4 1/2" round head wood screws which are readily available.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Shoulder strap bracket - screw length?
« Reply #7 on: January 18, 2026, 08:50:28 AM »

What I use for guitar tuners vs what I use for strap brackets  8)

Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal