Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Tuning Bombate reeds  (Read 786 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Tuning Bombate reeds
« on: December 30, 2025, 02:50:15 AM »

My understanding of Bombate reeds is that the outward facing surface of the reed tongue is ground to a slightly curved, convex profile (rather than just flat).  Ostensibly, this results in a reed with superior response and performance.  I have such a set in a box and the reeds are fabulous (whether or not that's related to them being Bombate, I couldn't say).  However, I'm faced with the prospect of having to tune the entire box down to standard reference pitch of 440 instead of somewhere between 441 and 442 where it currently sits.  My questions relates to tuning Bombate reeds - would standard tuning practices of using a flat file along the face of the reed tongue work against the supposed benefits of a reed that's been ground to a curved surface?  Would I be affecting the quality or responsiveness of a reed by essentially flattening a portion of the curved surface in the process of lowering the pitch of such a reed? Would love input from anyone knowledgeable and experienced with working with Bombate reeds.  Many thanks!
Logged
C#/D player

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Tuning Bombate reeds
« Reply #1 on: December 30, 2025, 08:06:47 AM »

Would I be affecting the quality or responsiveness of a reed by essentially flattening a portion of the curved surface in the process of lowering the pitch of such a reed?

On a scale of 1-2hz you won't affect any of the reed characteristics. You're removing minuscule amount of material compared to making a reed and profiling it to pitch.
In fact, I'd go as far as saying that the same safely applies to +/-30c for most reeds.


I've heard the "bombate" term before - thank you for explaining what meaning the marketing man has put into it. Let's have a think about it:

1) Generally, the less of a weight a tongue has at the tip (steel strip thickness or in extreme cases - braze ons), the better the response.
However, even the highest quality reeds that I've held in my hands had some degree of tip-weighting. To my ears, this is a one-way street: you can kill a reed by making the tip weight too heavy, but once the tip is within a usable range (and the range is very wide - probably around 3-4 semitones for the middle octaves!) it works well as long as the rest of the reed is good quality.
In fact, even on some highest quality Italian hand-made reeds, there's some degree of reedplate size standardisation - i.e. same plate being used for a range of 3-4 semitones.

2) The stiffer the reed, the better the dynamics, as long as the reed still works and the gaps are very tight. Stiff reed + large fitting gaps = poor performance. Stiff reed + small gaps = good performance. The convex profile  does exactly that - produces a stiff reed that is expected to perform very well as long as the fitting gaps are low.

Conclusion: "bombate" shape suggests that the reeds are high quality (it evidences the high-performance characteristics of being stiff + light-tipped), but does not in itself make them good. It's just a side-effect of a very carefully designed and well-executed reed.
My expectation is that for all practical purposes, these won't perform any better than another top quality reed that hasn't been branded as "bombate" by the marketing department.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Tuning Bombate reeds
« Reply #2 on: December 30, 2025, 06:53:00 PM »

I was expecting that there would be more feedback about these reeds than this!

Interesting perspective, mChavez.  I posted the same query on an Accordion Repair Facebook page and most of the answers I got actually suggested that re-tuning the reeds *would* impact the benefits of the convex/curved nature of the reed profile to some degree.  Mind you, most of these people also believed that tuning a reed by 8 cents reduced it's lifespan significantly, which I do not agree with, so I'm not sure how much stock I put in their feedback...

It's worth noting that the rounded profile is very, very subtle with these reeds - it takes looking at them in a certain light to notice, and even then it appears that it's only the very edges that are somewhat rounded, leading me to believe that careful tuning towards the centre of the reed tongue would make a negligible impact...
Logged
C#/D player

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Tuning Bombate reeds
« Reply #3 on: December 30, 2025, 07:26:37 PM »

Hmm. Might be my mis-understanding. Are they convex along the tongue (that's how I understood it, and it makes sense to make a reed like that, as per my previous message...More of a flat strip gradually feathering out closer to the tip), or are they convex across the tongue (aren't most hand-made reeds? Which would be an effect of careful cross-filing by the reedmaker).

Whether it's a hand file on my old Alfred Arnolds, Mischenko and Tula's Polyana, or the special reed sanding machine (can't remember the name) used by Italians, like it is on my Cagnonis (and Germans on my early Artiste Golds from a Morino), the reedmaker is careful not to remove too much material on one side, so they end up with some concavity built into them.
« Last Edit: December 30, 2025, 07:34:13 PM by mChavez »
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Tuning Bombate reeds
« Reply #4 on: December 30, 2025, 07:43:46 PM »

The reed tongues are rounded (convex) across the tongue, from side-to-side. The outer edges of the reed tongue, all along the length of the reed, are rounded slightly. It’s not rounded from tip to heel. I’ve attached a photo of one of the reeds in question to illustrate.
Logged
C#/D player

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Tuning Bombate reeds
« Reply #5 on: December 30, 2025, 08:37:25 PM »

Very interesting. This is not what I expected.

I'd still happily shift them +-30c without a second thought. Trivial amount of material being removed.

Here's a photo of early Artistes fitted into 1950s Morino. Afaik, best Hohner reeds that were made in-house. Very clear convexity. Manufacturing quality is exceptional.

PXL-20251230-201906152" border="0
PXL-20251230-201912030" border="0

When Artistes became the low-budget option int he 60s, their overall quality went down due to severe cost cutting in every respect and the ones from that era are no longer convex - I've checked my parts bin.

I wonder if it has anything to do with just how much input a reedmaker has in the reedmaking process, rather than the actual fact the reeds are slightly convex. Early ones going into Morinos, first-gen Atlantics and (I've been told) even at least one Gola were hand made, then hand-fitted to very tight tolerances.
Later ones going into cost-cutting-revised Atlantics were most likely spat out by a machine, then hand-fitted with larger tolerances. Still decent reeds, mind you. I've seen worse reeds marketed as Italian TAMs.

My Polyana reeds are slightly convex too, but it's hard to capture in a photo. In this case it's more to do with a master reedmaker being careful with the hand file I think.


I'd like to clarify that when lowering by 30c (more than 8-10c in fact), apart from piccolos that don't need much to change pitch, I'd use a file or sandpaper and work gradually along the bottom 2/3 of the reed. I'd never use a scratcher to lower a reed by this much, and I wouldn't grind a deep gutter across the reed with a dremel either - deep scratches are a right way to put stress concentration points into the reed. If using a file or sandpaper, you're not doing anything that's different from regular reedmaking process.
« Last Edit: December 30, 2025, 08:57:19 PM by mChavez »
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Tuning Bombate reeds
« Reply #6 on: January 01, 2026, 11:12:50 AM »

My assumption re these reeds is that the curved edges are a result of the belt grinder tension across the tongue. It's just what it looks like after grinding with that tool (a long thin belt between two wheels), rather than anything more calculated than that. Maybe the belt used to grind these tongues has a bit less tension between the belt wheels than some other grinders.
To lower big reeds I use a sharp, square profile file. For smaller mid range reeds i sometimes use a pen sized battery engraver which does less damage than a file or scratching if used carefully.
« Last Edit: January 01, 2026, 11:16:37 AM by Rog »
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Tuning Bombate reeds
« Reply #7 on: January 02, 2026, 09:08:07 AM »

https://youtu.be/pfqaOxf39zc?si=U829uW1H6U5FepxM

Have a look around the 9 minute mark, for an example of such a belt grinder.

Clearly pre-fabricated parts, but lots of A Mano work assembling and setting the reeds.

Jurgens Ciccarelli in this video is the man who got a lot of us into his Bombate line of reeds, but I don't know if the reeds in this video are regular A Mano or the Bombate line.

I've done a few boxes in the past where I've "burnished" the reeds, especially along the edges, and though I'm not sure it made much difference in response, the tone was noticeably different. I say "burnished" for lack of better term, as its not really polishing, and not really sanding. No fancy belt sander here, just a 5x5 mm hardwood stick with some suuuuper fine wet-and-dry sandpaper that had the grit nocked down on another surface before touching a reed.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Tuning Bombate reeds
« Reply #8 on: January 02, 2026, 04:58:55 PM »

Another video here, not sure but it could be Mr Cicarelli again - https://www.youtube.com/watch?v=GgYYyn72H, so belt tendiLI

I notice the belt sander has a metallic shoe backing the belt, so belt tension should not be a major factor. A flat shoe would give a standard reed, and a slight concavity in the shoe would presumably allow to sand a convex surface on the reed if so desired.
Logged

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Tuning Bombate reeds
« Reply #9 on: January 02, 2026, 05:33:26 PM »

  ... a slight concavity in the shoe would presumably allow to sand a convex surface on the reed if so desired.

Having used such a setup in a different line of business (working jeweller, since you asked), my recollection is that unless the belt's really sloppy, the item being polished/linished/whateverished doesn't end up with any significant degree of convexity unless it's pushed quite hard against the concave backing pad. And that of course is not a Good Thing when fettling delicate items ...
Logged
We're all doomed ...
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal