Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Theo’s Repair videos  (Read 1920 times)

0 Members and 1 Guest are viewing this topic.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Theo’s Repair videos
« on: September 11, 2025, 05:04:43 PM »

My first trial of making a repair video. 

Please feel free to comment here with positives and ideas for improvement and development.

https://www.youtube.com/watch?v=uWkhn_VlrL8

For the moment the video is unlisted so you must use the link above.
« Last Edit: February 13, 2026, 06:39:34 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Repair videos
« Reply #1 on: September 11, 2025, 05:30:24 PM »

Interesting video, informative and well done !  I liked the idea of bending levers to get the whole action out in one piece. You said the new springs were thinner and had a different angle, which made me curious about the actual diameters (not sure how relevant this info would be for the video).
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Repair videos
« Reply #2 on: September 11, 2025, 05:35:58 PM »

The original springs were .65mm, the replacements .55mm.  If I were doing it again I would include the measurements.  I might add it to the notes.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: Repair videos
« Reply #3 on: September 11, 2025, 05:42:52 PM »

great video. option 2 which might have been worth a mention is obviously remove the levers instead of bending them and put in new pins (model railway track pins) on reaaasembly. Saves bending and rebending levers but more time consuming. other thing worth a mention is maybe diameter of old spring vs new spring. Using old rod to replace the springs one at a time is a genius idea.....thats the kind of stuff folks need to know. great stuff.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Repair videos
« Reply #4 on: September 11, 2025, 06:52:23 PM »

Chris,  yes I’ve tried that method too.  There are pros and cons both ways. I prefer the way I do it because it’s a bit quicker, the levers are stay connected in the correct positions,  and I never manage to find pins that were as good as the originals.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Repair videos
« Reply #5 on: September 11, 2025, 06:53:04 PM »

And comments on the quality of filming, focus, sound etc?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Repair videos
« Reply #6 on: September 11, 2025, 07:45:24 PM »

And comments on the quality of filming, focus, sound etc?

Since you asked, Theo ... FWIW I thought it an excellent instructional video.  However, as an ex-pro photographer I'm puzzled by the low contrast and low colour saturation, which must surely be down to the lighting.  It's even enough, but it seems very "flat" (to use the technical term), which seems to have resulted in a video which is quite "low-key" visually.

Having said that, I'm stuck for a sensible way of improving matters without a great deal of experimentation, so by all means feel free to disregard my opinion and crack on with your next one!
Logged
We're all doomed ...

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Repair videos
« Reply #7 on: September 11, 2025, 07:52:00 PM »

Thanks Dan, that’s very helpful.  I need to look again at lighting.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Repair videos
« Reply #8 on: September 11, 2025, 07:58:06 PM »

Thanks Dan, that’s very helpful.  I need to look again at lighting.

I'm not sure about that Theo.  I just ran it from the start again and on this screen (a bog-standard Chromebook running Chrome browser), it's flat right from the opening shot outside your premises. 

If anyone else comments along the same lines, I wonder if there's some setting somewhere that is affecting the colour management at your end - or at YouTube.  Unfortunately with video and browsers, I have zero expert knowledge on which to base suggestions.

ETA - Just checked it on my wife's Windows 11 Laptop running Chrome.  With the screen brightness turned up it still lacks contrast and saturation by my standards (and compared to similar offerings).  But obviously that's very much one opinion FWIW ...
« Last Edit: September 11, 2025, 08:06:24 PM by Disparate Dan »
Logged
We're all doomed ...

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Repair videos
« Reply #9 on: September 11, 2025, 08:19:15 PM »

It would have been good to see a close up of the springs in situ, to see how they’re mounted and bear on the button rods. Presumably the axle runs through the loop in the springs, explaining why it’s necessary to remove it. And where do you get weaker springs?
Logged

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Repair videos
« Reply #10 on: September 11, 2025, 11:38:23 PM »

Enjoyed the video, wouldn,t mind it being a bit longer.
 Was the bass end from a Corona 3?- The pattern of holes on the bassplate is different to mine.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Repair videos
« Reply #11 on: September 12, 2025, 07:48:04 AM »

The bass end was from a 12 bass Double Ray.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Repair videos
« Reply #12 on: September 12, 2025, 08:00:11 AM »

Ok not a Hollywood production, but vastly more professional than any of my ramblings.
All the essentials are there, but the details are missing - how the spring hook works and a close-up of the axle follower would help.
And it's difficult to keep the work centre of shot and not get your head in the way.
But it does the job very well. I'm being picky. A series of videos of this quality would be very welcome
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Sebastian Trudgian

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 124
  • DG Pokerworks and also play Irish Whistle/Flute
Re: Repair videos
« Reply #13 on: September 12, 2025, 08:04:37 AM »

So I loved it, particularly the charming intro!

I’ve recently started tweaking my own melodeons (pallets, basic tuning, springs etc), which I’m loving, but wish I’d known this first (particularly the trick of using a second axel)

Since you asked specifically re filming/sound, this is a super personal thing, but personally I prefer a narrower aperture.

Apologies if you know all this (or I’ve forgotten my filming days), but when you have a wide aperture (like I think you have set here), you get more “realism” with a narrow “depth of field” effect (ie a small area in focus and an elegant blurring of areas just outside this short depth that’s in focus)

This works well when the box is on the desk, but when at the start (when I guess you want people most engaged in watching), the box is slightly out of focus, whilst the desk stays in focus.

Most cameras will also have a “autofocus” feature, but I find these tend to do unreliable things eg would have focused on your head etc.

If you set a narrow aperture, everything is in focus (a bit like in your intro sequence of your house) and I think might work better for this sort of detailed video.

The only downside of narrow apertures is you need more light (as there’s hole in the lense is smaller) or else the camera will try and compensate by increasing its sensitivity but can lead to a grainier image.

Just a personal thing though, LOVED the video Thankyou for your time putting it together (and intrigued how you get air to your tuning box, am currently planning making one)
« Last Edit: September 12, 2025, 08:09:18 AM by Sebastian Trudgian »
Logged

Clive Williams

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3936
    • Home Page
Re: Repair videos
« Reply #14 on: September 12, 2025, 08:48:25 AM »

Loved it Theo. You've put a lot of work into that, and a series of similar films will be a great resource for aspiring repairers. I thought the lighting in general was ok, but the work inside the box could do with extra lighting. One of those circle LED light things so beloved of influencers (of which you are now one!) might produce a diffuse light where you need it. And zoom ins of the spring work before removal, and after. Also close zoom ins when you're replacing the springs would be great. No issues with sound; it was great.

But in general, great - please keep doing them.

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Repair videos
« Reply #15 on: September 12, 2025, 09:53:47 AM »

Please feel free to comment here with positives and ideas for improvement and development.

Lovely video. I sure couldn't produce anything like this.

A few thoughts (since you've asked!):

Video:
My personal bench is abysmal and I am notorious for being a lot worse than average for leaving stuff on it :-[ but for the video purposes, I'd keep the bench free of tools & parts that are not relevant to this particular job - it lets the viewer focus on what's actually needed. Makes it a bit easier to scroll through the video too if looking for a particular step.

Putting a white sheet on the bench creates a good contrast of parts vs bench compared to a wooden surface. But it might call for some experimenting with lightling.

Try experimenting with a lamp/torch so that it would light up the insides of the box, especially when doing fiddly steps like fitting springs.

If there are any lengths of the video that don't require commentary, add some good background melodeon music, like the one in the intro :||:.

Content:
Really depends on how deep down the rabbit hole you intend to go.
There's two topics in one here. 1) Taking the mech out & putting it back in. 2) Adjusting spring tension.
You can split them into 2 videos, e.g.:

1) In-Out
- Types of mechs. E.g. Direct drive, "Flat" Roller, "Raised" roller, explain how different types of linkages work.
- Points already covered
- What to do when you do get a stripped screw. E.g. try a drop of CA into the hole. If it doesn't help, then glue in a wood chip/toothpick and make a hole in it with a hand drill.
- Adjusting axle mounting points for levers to take out any lever sideshake (by bending the posts that hold the axle)
- Maybe cover axle wear (and push rod pistons wear on roller mechs) as it's quite relevant for melodeons where the same button is pressed over & over again, compared to Stradella.
- How to put it all back in.
- Check for bent pallet levers after installation (happens with aluminium and soft steel just from taking the mech out) and show how to adjust them.
- Check for even button height after installation. Explain why it can change (pallet lever bent, pallet thickness altered). Adjusting the levers vs heating up the rod and adjusting the button. Probably worth mentioning acceptable range for button height & travel.

2) Spring tension.

You already have the expertise what springs to install into this bass end, but you're not explaining how you arrived at it, which is what most beginners would really struggle with.

- Check original tension by placing weights on buttons.
- Explain trade-off between playability and box becoming self-playing on the push.
- Propose target weights for a professionally set-up box (this is very box-specific, but, say, I'd aim for 220-240g as the first point of call on a roller bass machine. This is probably significantly lower on a direct drive mech in the video but I never worked with these.
- Talk about bass machine leverage. Button travel & pallet lift vs pallet resistance on push & playability.
- Adjusting spring tension: bending springs vs making new springs from different wire gauge.
- Testing adjusted spring in the box to measure the tension/weight & check for self-playing on push.
- Ensuring all buttons have as equal tension as possible.
- Worth explaining that this set up is what makes the difference between a professional-grade box and an attic find/barely usable cheapo beginner box. Definitely worth explaining that this work can take a lot of hours, (if not days for bass and treble) and this is what a professional melodeon player will be paying for when they buy a high end melodeon or are paying a fettler to regulate an existing box.

All of the above is a bit of idealistic knowledge-share content. I fully appreciate that not all customers who want their box "done" are willing to pay for the hours & hours that have to go into such set up.
« Last Edit: September 12, 2025, 10:10:34 AM by mChavez »
Logged

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: Repair videos
« Reply #16 on: September 12, 2025, 11:22:06 AM »

Thanks, Theo, it's a great video.

I didn't have any problems with the lighting either, but if you wanted to lift it a bit, a ring light on a cantilever stand would bring up the bench illumination without bouncing back. You can get the sort that clamp to desks like anglepoise lamps, or ones that stand on the floor.

I like messy workbench too. It's interesting and sometimes useful to see what people keep within reach. I've used a small paintbrush to get dust out assemblies before, but they can be a bit feeble; I hadn't thought of using pastry brushes.

As someone who can take on some small repair tasks, I always find the hardest thing by far is identifying the size of any fixtures and hand tools needed. I've been held up by two days trying to work out the size of a single screw and then find a match for it! So it would be nice at the end of videos to have a stationary screen listing any key bits you used. In this one, what gauge was the temporary axle rod? What sort of little clamp did you use to handle the springs? What springs were they?
Logged
Vintage Double Ray C#/D

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Repair videos
« Reply #17 on: September 12, 2025, 03:27:42 PM »

"messy workbench"

I was going to comment that his workbench was nice and tidy!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Repair videos
« Reply #18 on: September 12, 2025, 03:37:46 PM »

"messy workbench"

I was going to comment that his workbench was nice and tidy!

Thank you.  It is much clearer than it was before we started filming!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Repair videos
« Reply #19 on: September 12, 2025, 06:21:10 PM »

Hi Theo, the video is fine as it is, FWIW. Personally i wouldn't bother with any 'box opening' (pet hate of mine) and though charming, i'd keep any intro to a minimum and dispense with the 'who i am and this is what I do’. Most YTubers don't actually bother with it and start 'in medias res' (in the middle of the action). The instructional content is solid and it's obvious what you are doing and how you reach the goal, which is what people want to know about. When you have 250k followers you can hire a camera person to monkey about with the aperture settings and fancy lighting. I do however particularly like the overhead camera. What camera and how did you suspend it?
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal