Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: comparing a stepped keyboard to a flat keyboard  (Read 3770 times)

0 Members and 1 Guest are viewing this topic.

tedrick

  • Guest
comparing a stepped keyboard to a flat keyboard
« on: December 23, 2009, 10:34:22 PM »

Hi everyone -
I have a line on a 60s paolo soprani with a stepped keyboard - I was wondering if it would be possible to remove the stepped keyboard and replace it with a machined aluminum flat keyboard. Can the key mechanisms be adjusted to be flat, or on a stepped keyboard are they set in such a way that they can not be modified to a flat arrangement?

Thanks for any thoughts/opinions on this idea --
Ted
« Last Edit: December 27, 2009, 01:40:14 PM by tedrick »
Logged

tedrick

  • Guest
Re: converting a stepped keyboard to a flat keyboard
« Reply #1 on: December 23, 2009, 10:53:55 PM »

clarification -
this is a 2 row Paolo -
Ted
Logged

tedrick

  • Guest
Re: converting a stepped keyboard to a flat keyboard
« Reply #2 on: December 27, 2009, 04:02:52 AM »

went and checked out a nice stepped keyboard Excelsior DG box at accordion heaven in St. Paul today to get a feel for what a stepped keyboard feels like in comparison to a flat keyboard.

I was actually pretty impressed with how it felt - not that majorly different than a flat keyboard.

You have to be precise with your finger placement on the buttons - not just slip and slide around - but if you play with your finger tips (as opposed to your pads), there really isn't that much difference between the two....

After seeing a stepped keyboard I appreciate what a dumb question it was to ask if you could convert a stepped to a flat -- totally different mechanical layouts ect --

The stepped keyboard was not as weird feeling as I thought it would be -- all the buttons were right where I expected them and the response and speed on this Excelsior box was very nice.
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: converting a stepped keyboard to a flat keyboard
« Reply #3 on: December 27, 2009, 12:04:24 PM »

It all depends on your playing style - I can't play stepped keyboard with the fast ornamented style irish music I play. I've tried, but it just does not feel comfortable.

I've done the conversion to a 2 row paolo, as have two friends of mine. It was discussed not long ago in the "old red paolo" thread. You've got to have a new cover plate, cut off all the levers/rods in the right angle, and install new buttons, plus a whole lot of adjustment. It's possible allright, the outcome is great and much more comfortable for me, but it does take a lot of work.
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: comparing a stepped keyboard to a flat keyboard
« Reply #4 on: December 27, 2009, 04:16:22 PM »

tedrick and Lars,

I agree with Lars, it was not a dumb question -- it can be done and it can be worth doing. But it takes some special skills and a lot of forethought to avoid botching the job.

I personally have done this, and the results were great. I'm not a machinist, but I had the help of an excellent one for the parts I needed.

I do remember Aldo Mencacini, expert on Paolos, telling me that you couldn't do it with some models, depending on the keyboard angle. So some careful measurement, planning, and comparison of your stepped-board-possible-project with similar flat-keyboard models would be a good idea. That's what I did.

Then there is the issue that to do conversions like this may be compromising the originality of a fine old musical instrument that might be valued by some one else just the way it was made. I do worry about this and always try to do a little research to see if the instrument might more appropriately be left original. Also, I try to use the most reversible means  possible when I have made the decision to alter an instrument from its build specifications, and where possible save all original parts, so that a later musician might be able to restore it if that comes to seem a wiser decision.

Remember that what you value about an instrument today may not be what is ultimately most valuable about it to someone else. The antiques roadshow for example is full of cases where one (temporary) owner's decision to personalize or alter an item drastically compromises its value later.

Ultimately it might be better value for you to find an accordion that is already in the condition you want for playing, unless you are especially skilled or are willing to take on a project for its own sake. A lot of such projects with antique cars, accordions, etc. consume more cost and time than the final result is worth.

Good luck!

PG
Logged

Don Roberts

  • Good talker
  • **
  • Offline Offline
  • Posts: 64
Re: comparing a stepped keyboard to a flat keyboard
« Reply #5 on: December 29, 2009, 12:40:04 PM »

So Ted, in general, how did you like the excelsior DG box ? Wonder if it was actually made by excelsior.
AccordionHeaven has some interesting instruments but they seem priced too high.
Logged
C#/D CBA  PA  GBH  SSP CD DVD BVD LS/MFT

tedrick

  • Guest
Re: comparing a stepped keyboard to a flat keyboard
« Reply #6 on: December 29, 2009, 02:02:29 PM »

Hi Don -
I really, really liked the box. If I were a 4th man I would be very into this nice little box - this is the one I played:

http://www.hobgoblin-usa.com/local/product.php?ID=GX4244

3 voice musette tuned - but not too wet - the box was well constructed, very nice fit and finish. The stepped keyboard was not a problem for me. If anything it encouraged more precise technique because you feel just the buttons.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal