Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Erica Keyboard on an old pokerwork?  (Read 425 times)

0 Members and 1 Guest are viewing this topic.

MikeSchway

  • Member
  • *
  • Offline Offline
  • Posts: 11
Erica Keyboard on an old pokerwork?
« on: February 01, 2026, 07:43:45 PM »

Hello.  First-time poster, so please be gentle.  (:)

I recently acquired a rough c.1940s pokerwork-shaped faux-tortoise laminate-clad GC with a broken stepped keyboard.  It seems to be a common failure; material is completely missing between buttons 4-7 on the outer row.  It’s still somewhat playable as-is, but not for long. I’m assuming that a direct repair isn't practical and replacement would be the least complicated way forward.  I understand that the favored wooden replacement from Acorn is unfortunately no longer available, but a plastic replacement specific to the Erica can be obtained through Hohner’s C-shop and other vendors for under 50 euro.

Will the modern Erica replacement fit on on older stepped-keyboard box with only minimal cabinet modifications? 

Thanks.

—Mike Schway
Bellingham, WA (US)

(once I figure out how to compose a proper sig file I'll include the obligatory list of my arsenal)
Logged
--Mike Schway
Bellingham, WA US

Personal arsenal:  Marc Savoy Acadian (C,D, wet D), Corona II (60s GCF, newer GCF and FBE), Far, FAR too-many pokerworks (GC, AD, DG), Erica GC, Castagnari Dinn3 C#D, Merlin DG, Lisheen C#D

Squeezebox Of Delights

  • Good talker
  • **
  • Offline Offline
  • Posts: 81
Re: Erica Keyboard on an old pokerwork?
« Reply #1 on: February 01, 2026, 09:13:47 PM »

I tried to replace my pokerwork's plastic keyboard with a wooden Erica one and it didn't quite fit to the body of the box properly, so from my experience no. You might be able to alter one or both of the pieces to get them to fit, but I feel like it might be more sensible to buy a second hand replacement, or even replace the top of the keyboard entirely!
Logged
Oops! All Hohners

Blenchy

  • Blenchy
  • Good talker
  • **
  • Offline Offline
  • Posts: 74
  • What do you mean it's upside down?
Re: Erica Keyboard on an old pokerwork?
« Reply #2 on: February 02, 2026, 10:51:14 AM »

Similar to what Squeezebox of Delights said, Modern ones don't really fit. A mix of bolt/screw holes not lining up and the general shape being different enough for it to be a less than ideal fit.

A direct repair is doable! I've had to do it before, but yes it's a more complicated fix than finding a replacement. Just depends how much time you want to spend on it...
Logged
David Blench - Sheffield

Hohner Pokerwork and Laurel D/G, 3 Voice Galotta D/G, Old 12 bass Hohner Bb/Eb, 4 Voice "Foreign" C one row. Some concertinas and many more boxes in bits

Part of Handsworth Sword and Rumworth Morris

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Erica Keyboard on an old pokerwork?
« Reply #3 on: February 02, 2026, 11:36:47 AM »

The main difference between keyboards for pokerwork and its variants and Erica is that the Erica has a notch cut out at each end to clear the slightly more bulky case on the Erica.  It is possible to make spacers to fill the gaps.  The screw holes should line up well enough.  The screws are different.  Modern plastic keyboards use a M2.5 machine screw, wood keyboards on older models use wood screws.
As Blenchy says it is possible to repair a wood keyboards by grafting in additional wood, or even making a complete new top. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

jarviw

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 156
Re: Erica Keyboard on an old pokerwork?
« Reply #4 on: February 02, 2026, 01:27:27 PM »

When I was under MAD and looking at ebay all the time, I often saw boxes with damaged keyboard cover like this. I always did woodworking in my head  ;D

No, I have not actually tried to repair one, but I imagine it wouldn't be too difficult to patch it and drill some new holes. That said I do have a garage full of woodworking tools. I'd think a decent woodworker can get it repaired for you in the time of two pints of beer.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal