Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Weltmeister D/G spring replacement  (Read 477 times)

0 Members and 1 Guest are viewing this topic.

JohnJ

  • Member
  • *
  • Offline Offline
  • Posts: 26
    • JJ's Stuff
Weltmeister D/G spring replacement
« on: February 04, 2026, 10:42:14 AM »

I'm struggling to replace a spring on the treble side of my D/G Weltmeister, the button board seems to be impossible to disassemble.

Any ideas on how I can progress with this without risking irreparable damage? 
Logged
Hohner B/C, D/G, & A/D/G, & Maestro D/G

Blenchy

  • Blenchy
  • Good talker
  • **
  • Offline Offline
  • Posts: 74
  • What do you mean it's upside down?
Re: Weltmeister D/G spring replacement
« Reply #1 on: February 04, 2026, 12:08:22 PM »

Could you send a picture? I've not had this issue before but I might not've come across this model before!

I know on some you have to unscrew the keyboard/button board from the body via the screws/bolts on the inside of the box which then reveals the slots the springs are sat in for each button. Hope that makes sense!
Logged
David Blench - Sheffield

Hohner Pokerwork and Laurel D/G, 3 Voice Galotta D/G, Old 12 bass Hohner Bb/Eb, 4 Voice "Foreign" C one row. Some concertinas and many more boxes in bits

Part of Handsworth Sword and Rumworth Morris

JohnJ

  • Member
  • *
  • Offline Offline
  • Posts: 26
    • JJ's Stuff
Re: Weltmeister D/G spring replacement
« Reply #2 on: February 04, 2026, 01:28:46 PM »

Here you go.
I can't see any way of getting into the guts to be able to fettle the linkage / springs.
I've been trying to figure out how it was all put together in the first place, but can't begin to guess.
The wire pivot pin looks fairly straightforward enough to remove (although it's a snug fit), but I suspect putting it back in place would be a nightmare!
I'd be grateful for any help or advice.
Thanks.
Logged
Hohner B/C, D/G, & A/D/G, & Maestro D/G

Blenchy

  • Blenchy
  • Good talker
  • **
  • Offline Offline
  • Posts: 74
  • What do you mean it's upside down?
Re: Weltmeister D/G spring replacement
« Reply #3 on: February 04, 2026, 04:16:57 PM »

Ah! yes, I hope you're ready to practise your brain surgeon precision!

I've had to do this before and it's a little fiddly. I've attached a diagram that hopefully helps. What you have to do is get some very thin forceps or pliers in there, pull the top of the spring down, out of the lever then out of the keyboard.

Now for the reverse it's the tricky bit. There's sometimes a groove along the bottom of the channel that keeps the spring aligned. If not, I've filed one in before, it definitely helps! With some good long pointy grippy things (I use some surgical/dentistry ones) you have to guide your new spring to the hole. Tricky and fiddly! I push the spring into the channel first and then struggle with pushing the pointed up bit in. Sometimes with enough frustration you find yourself pushing it into the wood making a new hole... There's a lot of back and fourth and getting it wrong an annoying amount! Or, I'm just a bit daft and it'll be really easy for you to do haha!

I've done this spring replacement before where they needed it in action ASAP so I didn't have the bent top of the spring sticking up into the lever. It works but I wouldn't recommend it for a long term fix!

Hope that helps and sorry if I've over explained.
Logged
David Blench - Sheffield

Hohner Pokerwork and Laurel D/G, 3 Voice Galotta D/G, Old 12 bass Hohner Bb/Eb, 4 Voice "Foreign" C one row. Some concertinas and many more boxes in bits

Part of Handsworth Sword and Rumworth Morris

Blenchy

  • Blenchy
  • Good talker
  • **
  • Offline Offline
  • Posts: 74
  • What do you mean it's upside down?
Re: Weltmeister D/G spring replacement
« Reply #4 on: February 04, 2026, 04:23:59 PM »

I've just realised my diagram might be back to front but I think the principals the same!
Logged
David Blench - Sheffield

Hohner Pokerwork and Laurel D/G, 3 Voice Galotta D/G, Old 12 bass Hohner Bb/Eb, 4 Voice "Foreign" C one row. Some concertinas and many more boxes in bits

Part of Handsworth Sword and Rumworth Morris

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: Weltmeister D/G spring replacement
« Reply #5 on: February 04, 2026, 05:02:34 PM »

i'd probably take out a good one too so you can make a new spring to match (same thickness wire / same number of coils/ same size coils / same angles)....after all that fiddling it would be frustrating if its stronger or weaker than all the rest...take one from the very end of the keyboard and use the good one in the middle. that way if tension is slightly different its not so noticeable. also dont go weaker or the pallet may not be as airtight. plenty of light and long nose pliers.
Logged

JohnJ

  • Member
  • *
  • Offline Offline
  • Posts: 26
    • JJ's Stuff
Re: Weltmeister D/G spring replacement
« Reply #6 on: February 04, 2026, 08:53:26 PM »

Ah! yes, I hope you're ready to practise your brain surgeon precision!

I've had to do this before and it's a little fiddly. I've attached a diagram that hopefully helps. What you have to do is get some very thin forceps or pliers in there, pull the top of the spring down, out of the lever then out of the keyboard.

Now for the reverse it's the tricky bit. There's sometimes a groove along the bottom of the channel that keeps the spring aligned. If not, I've filed one in before, it definitely helps! With some good long pointy grippy things (I use some surgical/dentistry ones) you have to guide your new spring to the hole. Tricky and fiddly! I push the spring into the channel first and then struggle with pushing the pointed up bit in. Sometimes with enough frustration you find yourself pushing it into the wood making a new hole... There's a lot of back and fourth and getting it wrong an annoying amount! Or, I'm just a bit daft and it'll be really easy for you to do haha!

I've done this spring replacement before where they needed it in action ASAP so I didn't have the bent top of the spring sticking up into the lever. It works but I wouldn't recommend it for a long term fix!

Hope that helps and sorry if I've over explained.

Thanks Blenchy, that really has helped me.....I just need to source some springs now,....oh,and some some good long pointy grippy things!
Logged
Hohner B/C, D/G, & A/D/G, & Maestro D/G

JohnJ

  • Member
  • *
  • Offline Offline
  • Posts: 26
    • JJ's Stuff
Re: Weltmeister D/G spring replacement
« Reply #7 on: February 04, 2026, 08:58:16 PM »

i'd probably take out a good one too so you can make a new spring to match (same thickness wire / same number of coils/ same size coils / same angles)....after all that fiddling it would be frustrating if its stronger or weaker than all the rest...take one from the very end of the keyboard and use the good one in the middle. that way if tension is slightly different its not so noticeable. also dont go weaker or the pallet may not be as airtight. plenty of light and long nose pliers.

Thanks Chris - good idea!
I'll try to source some suitable springs - and I'll be sure to hold a few in stock for when the next spring fails!
Logged
Hohner B/C, D/G, & A/D/G, & Maestro D/G

JohnJ

  • Member
  • *
  • Offline Offline
  • Posts: 26
    • JJ's Stuff
Re: Weltmeister D/G spring replacement
« Reply #8 on: February 05, 2026, 01:28:47 PM »

Thanks again for your help.

I can't find a direct replacement for the broken spring so I've ordered 0.6mm dia spring steel wire from
https://www.cousinsuk.com/search?searchTerm=Spring%20wire

With the aid of this video I'm going to (attempt to!) make my own.
https://youtu.be/6yx7PwepbBk?si=YEMCT1WK6vUh3h8H

Logged
Hohner B/C, D/G, & A/D/G, & Maestro D/G
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal