Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Serenellini no-stopper  (Read 945 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Serenellini no-stopper
« on: February 18, 2026, 04:55:47 AM »

I acquired this box last year in an EBay auction. It’s a Serenellini Deluxe 3-voice (MMM) model in C#/D, same as the Serenellini Cloud/233 only it has no stops! I asked Stephen Chambers about this model and he had mentioned that Serenellini had sent a few examples like this one (with no stops) to his shop for the Irish market. I’ve not seen any other examples like this and wondering if anyone else has seen one? Or maybe even has one?

One thing that I really like about this particular example is that the outer row of pallets is operated by the inner row of buttons, which is ideal for a C#/D player. I know that Saltarelle did this on their Irish models for many years, but I hadn’t known that Serenellini had done the same (or at the very least, they had done it here). I’m actually on the lookout for a Saltarelle Nuage or Serenellini 3-stop (or no-stop) with that reversed pallet arrangement, so if you have one you might part with (regardless of key), let me know!

Logged
C#/D player

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Serenellini no-stopper
« Reply #1 on: February 18, 2026, 01:17:35 PM »

 mselic,

I know that Serenellini made some LMM two-row boxes (with stops) that have that reversed-pallet arrangement. They may have made a lot of them, not sure about that. But I remember one in particular because it was ordered and made in D/C# (D on the outside row) and I thought it was somewhat ironic that the somewhat unusual action designed to bring out the clarity of the inside row was favoring the C# row on this box (the row which was not much used by the player except for ornaments and reversals in the keys he played the most).  It's a good box as these Serenellinis made in the 80s or 90s were, but might be better yet if converted to C#D or DD# .  Sort of like the "McComiskey Bass" layout for the BC that Salterelle transposed up, wholesale, on C#D and DD# boxes where a somewhat different layout might suit those players.  Sometimes the makers seem to get one construction idea and apply it more generally than would be ideal.

PG
« Last Edit: February 18, 2026, 01:19:22 PM by pgroff »
Logged

kenakordeon

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 264
Re: Serenellini no-stopper
« Reply #2 on: February 18, 2026, 06:58:22 PM »

 but might be better yet if converted to C#D or DD# . 
PG
[/quote]


Paul,

Why do you think it "might be better" than the D/C#? I have played both D/C# and C#/D and since I had already learned the basics of the diatonic accordion on a one-row D melodeon I thought it was a natural progression to go to the D/C#. Now that I have had a few years playing the C#/D, although no longer owning one, and I can see and feel a few advantages but I'm not sure if there might be more than enough to choose one over the other. Almost everything I play is either Quebecois or Irish but I did work up a nice version of "Bistro Fada" by Stephane Wrembel on the C#/D.

Thanks for your thoughts.

Ken
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Serenellini no-stopper
« Reply #3 on: February 18, 2026, 08:22:53 PM »

I believe Paul was referring to the pallet arrangement being more suitable for C#/D (over D/C#) because the pallets with the greater lift - and clearer tone - would be operated by the inner row of buttons. On conventional models, it would be the other way around: the D//C# would benefit. What we’re discussing is entirely technical and has nothing to do with playing styles or benefits of one system over another.
Logged
C#/D player

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Serenellini no-stopper
« Reply #4 on: February 18, 2026, 09:04:29 PM »

I believe Paul was referring to the pallet arrangement being more suitable for C#/D (over D/C#) because the pallets with the greater lift - and clearer tone - would be operated by the inner row of buttons. On conventional models, it would be the other way around: the D//C# would benefit. What we’re discussing is entirely technical and has nothing to do with playing styles or benefits of one system over another.

exactly, thanks for clarifying that for Ken.  In fact, around the time I saw my friend's DC# Serenellini with reversed action, another friend of mine ordered a Beltuna Sara LMM in C#D which has the more "typical" action found in most two row boxes generally, with the outside-row pallets opening close to the front of the box and thus favoring clarity and brightness of the outside row --  & I thought that each of them had a box intrinsically more suitable (in this one aspect, of pallet location) for the other's fingering system. Each of them ended up playing a box that favored the clarity and brightness of their C# row, and each of them had a somewhat muted D row.

However, I should say that the reason for this muting effect is not necessarily "greater pallet lift" but that the actual location of the airways, whether close to the keyboard or close to the front of the box, seems more influential based on my observations. Sometimes that location effect can be mitigated or even overcome by gluing the reedblocks in the "near keyboard" location directly to the soundboard so they have shorter airways and couple more directly. There are discussion threads about this here on melnet.
« Last Edit: February 19, 2026, 10:13:48 PM by pgroff »
Logged

kenakordeon

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 264
Re: Serenellini no-stopper
« Reply #5 on: February 19, 2026, 09:47:21 PM »

Thanks to both of you for your clarification. I re-read the earlier posts and see how I misunderstood.

After a little more thought about this I think that might be one reason why I have preferred the D/C# system: the notes for most of the Irish and Quebecois melodies are most often the "louder" notes from the outside row. I did own a Mengascini LMMM C#/D on which the inner D row notes were close in volume to the outer C# notes but there was, to my ears, a slightly less bright tone of the D row notes.

To both Matt and Paul: any thoughts or suggestions on which brand of two-row accordions might have reeds from both rows sounding as equal as possible in both volume and tonal quality? Or, based on this thread and others is that just not possible?

Thanks for this discussion.
« Last Edit: February 20, 2026, 02:00:06 PM by kenakordeon »
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Serenellini no-stopper
« Reply #6 on: February 20, 2026, 04:59:25 PM »

Thanks to both of you for your clarification. I re-read the earlier posts and see how I misunderstood.

After a little more thought about this I think that might be one reason why I have preferred the D/C# system: the notes for most of the Irish and Quebecois melodies are most often the "louder" notes from the outside row. I did own a Mengascini LMMM C#/D on which the inner D row notes were close in volume to the outer C# notes but there was, to my ears, a slightly less bright tone of the D row notes.

To both Matt and Paul: any thoughts or suggestions on which brand of two-row accordions might have reeds from both rows sounding as equal as possible in both volume and tonal quality? Or, based on this thread and others is that just not possible?

Thanks for this discussion.

Hi Ken,

Since you play DC# now, you can enjoy that less muted (or alternatively, more raw) tone from the outside row in most traditionally-constructed 2 row boxes.

Let's leave aside boxes that have 2.5 or 3 rows of buttons or more; those complicate the discussion.

The difference in tone quality (timbre) between inside row and outside row of a 2 row box, when there are 2 rows or more of pallets on the soundboard, with one row of pallets closest to the keyboard and another row of pallets closest to the front of the accordion (facing the public),  has been discussed here on melnet before. It's less noticeable with 2 voice boxes, where both rows of relatively short pallets can be relatively similarly situated in the middle of the soundboard. The difference in timbre is not too bad with many 3 voice boxes if they aren't too compact -- especially if they don't have couplers in front of the grille. The difference is most noticeable when there are 4 voices (and up) and when there are couplers in front of the grille or not much ventilation of the grille near the keyboard.

Some boxes have ventilation (holes / fretwork) added to the keyboard plate to let more sound out from those pallets down near the keyboard.

One solution is to have all the pallets in a single line on the soundboard. You'll see this in boxes with a single row of buttons, but also in many of the Irish-American boxes with 11, 13, 15, buttons in one and a half rows. In this case you can have 3, 4, 6, 8 voices and still every button from the keyboard will give a similar timbre. A few Irish American DC# boxes were made with 17 or 19 buttons that kept all those pallets in a single row; this keeps the tone quality consistent but can make the box rather tall.

Since you're a DC# player, you might find you'd be happy with a vintage 15 key box built this way, or one of the modern boxes made in Quebec with 1.5 rows of buttons and the pallets all in a single line.

I've already mentioned my opinions, that the source of the tone difference is mainly location of the reedblocks rather than pallet lift. But in some boxes, pad lift may contribute.

I've also mentioned that one solution is to glue down one or more reedblocks directly to the soundboard. This construction gives a brighter, clearer tone even from reedblocks that are located near the keyboard side of the soundboard. If you leave the other reedblock(s) (that are located further from the keyboard) removeable with clamps and gasket, that can facilitate access to all the reeds and may balance the timbre between the two rows of buttons. I have examples here of almost identical 2v accordions where two of them were built differently (both reedblocks removeable vs one reedblock glued down) and you can really hear the difference.

There are some thoughts for you. Matt or others may have more to add. But look up those old discussions.

PG
Logged

kenakordeon

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 264
Re: Serenellini no-stopper
« Reply #7 on: March 02, 2026, 06:56:31 PM »

Hi Paul,

Thanks for your detailed explanation. I'll search the forums for any more discussions  but I doubt I'll need any more information than you have presented.

Ken
Logged

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Serenellini no-stopper
« Reply #8 on: March 02, 2026, 08:50:08 PM »

A very interesting post and replies, thanks to all.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Serenellini no-stopper
« Reply #9 on: March 03, 2026, 05:51:02 AM »

Quote
However, I should say that the reason for this muting effect is not necessarily "greater pallet lift" but that the actual location of the airways, whether close to the keyboard or close to the front of the box, seems more influential based on my observations.

I completely agree, Paul.  My experiences have been that while pallet lift can be a contributing factor, the tonal differences between the rows has more to do with the location of the air holes and how sound travels from there (and proximity to keyboard, etc).  I've tested this by removing the back keyboard plate, allowing the buttons to travel as far as they want with more than enough pallet lift, and the tonal differences are still just as present.  This is also why I find that the cantilevered pallet system can actually result in a *greater* tonal difference (and less clear tone), since the pallets open up towards the enclosed space closest to the keyboard and away from the rest of the box.
Logged
C#/D player

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Serenellini no-stopper
« Reply #10 on: March 03, 2026, 01:49:47 PM »

Having spent an hour or two working under the grille of my Nuage that looks very similar, even with the same sort of foil facing on the fondo. Ditto the keyboard and pallet arrangement, and the colouring on the casing. My Nuage has a brilliant fast keyboard.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Serenellini no-stopper
« Reply #11 on: March 03, 2026, 02:46:58 PM »

Having spent an hour or two working under the grille of my Nuage that looks very similar, even with the same sort of foil facing on the fondo. Ditto the keyboard and pallet arrangement, and the colouring on the casing. My Nuage has a brilliant fast keyboard.

Would love to see photos of yours, Rog!
Logged
C#/D player
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal