Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Restoring Pre-War Hohner Club II  (Read 17835 times)

0 Members and 1 Guest are viewing this topic.

Andrew Culwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 620
Re: Restoring Pre-War Hohner Club II
« Reply #20 on: December 28, 2009, 10:40:35 PM »

With respect, always get a second opinion about any major repairs.  If you have ever seen celluloid/acetone application (new manufacturing) you would know that what you did would be suicide.

For a glimpse of the process, here's a video presented by Kimric Smythe who toured the Weltmeister factory. The bit on celluloid is about 53 sec. in........... :-X

                         http://www.youtube.com/watch?v=rYsSifiDapo


Kimric is an Old School mate of mine, He and I two young middle school Nerds who hung about at lunchtime talking about nerdy things like accordions.  He is quite the Weltmeister booster now!
« Last Edit: December 28, 2009, 10:44:08 PM by ajay38 »
Logged
Hohner's, Paolo Soprani red 4 voice, Paddy Clancy Celtic

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Restoring Pre-War Hohner Club II
« Reply #21 on: December 29, 2009, 11:54:04 AM »

What about covering the naked melodon with something like that  ;D
https://secure.aspects-supplies.co.uk/products/showproduct/470

Wow,  a melodeon that can double as a greengrocers stall!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Bill the Farmer

  • Not quite so
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 497
  • Hohner Club, Liliput...
    • Bill Farmer
Re: Restoring Pre-War Hohner Club II
« Reply #22 on: December 29, 2009, 04:29:39 PM »

I'm also not going with the de-clubbing as I'm a relatively new player so I figure the club system might turn out to be something that I can try out!
Not de-clubbing is a good idea, I think, as you can have it both ways. If you want to play it like a melodeon, you just need to learn to get the pull note for the gleichton off the other row with your pinkie, or other spare digit, plus you can get some lovely harmonic runs on the pull using the gleichton. I've now got two club boxes, and I love both of them.
Logged
Bill of Old Radipole Village

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Restoring Pre-War Hohner Club II
« Reply #23 on: December 30, 2009, 12:51:59 AM »

Celluloid (and any other suicide):

Please don't follow the shop practices you are seeing on the Weltmeister clip. 
At least, please, eye protection, even if you don't care about sawing/planing into your fingers, dissolving your skin or destroying (dear) brain cells.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Restoring Pre-War Hohner Club II
« Reply #24 on: December 30, 2009, 01:05:34 AM »

Celluloid (and any other suicide):

Please don't follow the shop practices you are seeing on the Weltmeister clip. 
At least, please, eye protection, even if you don't care about sawing/planing into your fingers, dissolving your skin or destroying (dear) brain cells.

I heartily agree! Seems like workplace safety is not on the top of the list at this facility!  :o
Logged

Andrew Culwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 620
Re: Restoring Pre-War Hohner Club II
« Reply #25 on: December 30, 2009, 01:17:56 AM »

Well I don't plan on losing any fingers or brain cells in the restoration process.  However a few brain cells might go with the celebrations on New Years Eve
Logged
Hohner's, Paolo Soprani red 4 voice, Paddy Clancy Celtic

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Restoring Pre-War Hohner Club II
« Reply #26 on: December 30, 2009, 10:25:14 PM »

Ajay, my friend, you are right, brain cells highly over-rated. Plus my favorite Father Martin re-quote:  The gift of God that gladdens the hearts of men.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Andrew Culwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 620
Re: Restoring Pre-War Hohner Club II
« Reply #27 on: January 02, 2010, 04:01:14 AM »

So now further questions about removing the pallets so I can remove the pallet liner. 

1.Do I remove the complete Bass and treble mechanisms then remove the pallets, this would seem to be the correct way to reface the pallets.  However a problem I'm trying to figure out is the Bass buttons keep me from removing the complete mechanism.

2. Do the bass buttons come off and on with ease or are they glued to the levers?  If they are glued how do I pull them off without damaging or bending the rods and levers or damaging the buttons?

Ideas?
Logged
Hohner's, Paolo Soprani red 4 voice, Paddy Clancy Celtic

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Restoring Pre-War Hohner Club II
« Reply #28 on: January 02, 2010, 10:34:55 AM »

It is usually easy enough to remove the pallets without removing the complete mechanism.  And when it comes to replacing the pallets the mechanism must be in place first, place the pallets into their positions under the levers, with the springs holding them there, then apply the hot-melt glue, or wax that fixes them to the levers.

The mechanism only needs to be removed if there are broken springs to replace.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: Restoring Pre-War Hohner Club II
« Reply #29 on: January 05, 2010, 01:37:05 PM »

What would be the best stuff for refacing pallets on an ordinary melodeon (ie Hohner pokerwork or similar)?   CGM Musical offer some ready-made felt and leather stuff, but they have at least two types "Felt glued on Special Leather" and "Felt glued on Persian Leather", and also choice of total thickness.

Any specific recommendations from anyone who's done the job recently?

I guess if its too thick then the buttons will be set too low ... or maybe the slots in the pallets could be cut a bit deeper.   I'm not sure how much thickness can be accommodated before it becomes a problem.
Logged
Tony S

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Restoring Pre-War Hohner Club II
« Reply #30 on: January 05, 2010, 08:29:56 PM »

I would assume that buying the stuff from CGM is safe bet considering that it is a specialized product for accordions.  It's a pretty simple job, though, so a good eye not unlike judging how much salt to put in the soup should suffice in determining the thickness of the felt. 

I replaced the felt and leather on the pallets of an old German rattletrap box that I bought on Ebay.  The reeds are out of tune (though not corroded or rusty, so it has a chance yet!) and leave a lot to be desired but at least the pallet fix has stopped the leaking which was very bad upon arrival.  I used a working Pokerwork as an example guide.  The pallets on the old German box are comparable in size and shape to the pallets on the Pokerwork. 

I bought some leather (shiny one side, soft the other) and two sheets of stiff felt from a craft store, sold in 8.5" x 11" cards.  The store had just one thickness so I didn't have a choice.  But after gluing and pressing the felt and leather together, the new materials were approximately the same thickness as what I had under the pallets in my old Pokerwork which was perfectly functional.  The hardest part was replacing the bass felts because navigating the mechanism was more involved.   

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: Restoring Pre-War Hohner Club II
« Reply #31 on: January 06, 2010, 08:20:36 AM »

Cheers.  I think on my Pokerwork there's just thin leather on the pallets, so any form of felt+leather is going to be thicker.   Possibly the best thing might be for me to take off just one pallet and have a good look - see how much could be accommodated with the lever right at the bottom of the slot.
Logged
Tony S

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Restoring Pre-War Hohner Club II
« Reply #32 on: January 06, 2010, 08:45:33 AM »

It's probably not worth doing if you only put on the same thickness of new material, and the old material can vary in thickness, so you must assume that you will have to adjust the height of at least some of the buttons.   It is simple enough to adjust the button height by gently bending the levers - that is the 'official' method.  deepening the cuts in the pallets is likely to result in some pallets splitting, so just clean out all traces of old glue, but don't remove any wood.

2 to 2.5 mm total thickness of felt and leather works for me. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Andrew Culwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 620
Re: Restoring Pre-War Hohner Club II
« Reply #33 on: January 28, 2010, 07:56:12 PM »

So what kind of glue should be used to glue the new Leather/felt to the pallets also what surface should be facing the pallet head when glued.  I'm assuming that the felt should be glued facing the pallet and the leather should be facing out from the pallet?  Also are the round fabric pieces that go ver the glue on the top of the pallet lever need to be replaced or can simple hot glue suffice, also where do I get these round fabric pieces if they are necessary?
« Last Edit: January 28, 2010, 08:07:41 PM by ajay38 »
Logged
Hohner's, Paolo Soprani red 4 voice, Paddy Clancy Celtic

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Restoring Pre-War Hohner Club II
« Reply #34 on: January 29, 2010, 12:10:46 AM »

General PVA has worked fine for me when gluing leather to felt. Sometimes you need quite a lot if the felt is very absorbent. Glue the felt to the wood so that the leather is facing the holes to create a good airtight seal.

No need for fabric discs, a line of PVA or hot wax will suffice to hold the pallet firm to the arm.

Screw all of the treble mechanism into place before gluing the pallets on so that you can adjust the position relative to the holes and each other.
Logged

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Restoring Pre-War Hohner Club II
« Reply #35 on: January 29, 2010, 01:05:09 AM »

General PVA has worked fine for me when gluing leather to felt. Sometimes you need quite a lot if the felt is very absorbent.

Alternative is to apply the adhesive to the leather (and pallets) simply because the felt is absorbent.
If saturated with glue, when dry, it will have lost the resilience that it was put there to provide.
« Last Edit: January 29, 2010, 01:11:55 AM by an bosca ceoil »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Restoring Pre-War Hohner Club II
« Reply #36 on: January 29, 2010, 08:30:30 AM »

General PVA has worked fine for me when gluing leather to felt. Sometimes you need quite a lot if the felt is very absorbent.

No, no, no!   Use the minimum amount of glue so it does not soak into the felt and harden it.  Apply the glue as a thin smear to the pallet then press on to the felt side of the lining material. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Restoring Pre-War Hohner Club II
« Reply #37 on: January 29, 2010, 12:24:24 PM »

I'm just saying that for gluing the felt to the leather you need enough so that the felt doesn't peel away at the contact surfaces because it's all soaked in. I can certainly see if you put too much onto the felt so that it hardens it's going to completely defeat the purpose of having a soft material there in the first place to shape to the holes and absorb the impacts.
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Restoring Pre-War Hohner Club II
« Reply #38 on: January 29, 2010, 12:54:00 PM »

Reading this page from an old thread might be helpful.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Restoring Pre-War Hohner Club II
« Reply #39 on: January 29, 2010, 12:58:22 PM »

Latex based glue eh? I shall give that a go next time.
Logged
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal