Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Casta Dinn B/c button height  (Read 416 times)

0 Members and 1 Guest are viewing this topic.

Gromit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 588
Casta Dinn B/c button height
« on: March 11, 2026, 10:12:53 AM »

I'm thinking of buying a Dinn B/c. I tried one before but found the button height too high compared to my Salterelle Boube. Almost unplayable for me as I sllde between buttons quite a bit. Can I get the height reduced?
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Casta Dinn B/c button height
« Reply #1 on: March 11, 2026, 12:16:26 PM »

Yes, button height can certainly be reduced. Keep in mind that reducing button height also reduces pallet lift, and at a certain point reduced pallet lift can have an impact sound/volume (mostly for the inner row of buttons on most instruments). I’ve reduced button height on many instruments without issue, but I’ve not yet seen or worked on a Castagnari Dinn.
Logged
C#/D player

Gromit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 588
Re: Casta Dinn B/c button height
« Reply #2 on: March 11, 2026, 04:09:11 PM »

Thanks mselic, the button height did seem quite a bit more. I don't want to get a Dinn and then find the volume is affected, might stick with what I've got.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Casta Dinn B/c button height
« Reply #3 on: March 11, 2026, 05:22:49 PM »

Googling for the Dinn brings in a few 'end pictures' where one can get a feel for the button height. It does not seem particularly high. Maybe the one you tried was not representative ??

Sample picture from O'Neills Music Facebook page attached.
Logged

Gromit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 588
Re: Casta Dinn B/c button height
« Reply #4 on: March 11, 2026, 06:57:57 PM »

Yes, doesn't look too high there but it is higher and also what I forgot about is the hard edge on the casta button. Makes it impossible (for me) to sllde between buttons, the salterelle button has a curved edge. Thanks for the pic, I'd forgotten about that, so just lowering the buttons is not going to do it.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal