Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed Block Mounting Gaskets  (Read 496 times)

0 Members and 1 Guest are viewing this topic.

MikeSchway

  • Member
  • *
  • Offline Offline
  • Posts: 11
Reed Block Mounting Gaskets
« on: March 12, 2026, 07:58:15 PM »

First time poster here (from the US).  Forgive me if this topic has already been beaten to a pulp.

I'm trying to restore several pre-60s pokerworks, a couple will receive new Erica blocksets (BC, C#D).  The original blocks all have a somewhat thick felt gasket on their soles and the mating surface on the soundboard is bare wood.  Apparently the newer Ericas, Coronas, etc have the gasket material on the soundboard and the sole of the blocks are bare wood.  I'm going to attempt to retrofit the box with the gasket on the soundboard which should facilitate future block changes.

From what I've gleaned from reading posts here on Melodeon.net that the gasket material of choice is called "Olovisc" which apparently is a synthetic chamois-type material with pressure sensitive adhesive backing. When I try to Google "olovisc", the only hits come from right here on melodeon.net.  One post from maybe 5 years ago (sorry, don't have it on hand) gave a link to an accordion supplies vendor in the UK, but that link was dead.

Does anyone have a source for Olovisc in N. America, and what other names would it go by?  If anybody has a better material in mind, by all means please chime in.

Thanks in advance,
--Mike Schway
Bellingham, WA

Obligatory arsenal disclosure:  "Acadian" (Marc Savoy) x 3, Corona II x3, Merlin II DG, Lisheen C#D, 2915 gold foil GC, several presswood pokerworks in need of deep restoration.
Logged
--Mike Schway
Bellingham, WA US

Personal arsenal:  Marc Savoy Acadian (C,D, wet D), Corona II (60s GCF, newer GCF and FBE), Far, FAR too-many pokerworks (GC, AD, DG), Erica GC, Castagnari Dinn3 C#D, Merlin DG, Lisheen C#D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed Block Mounting Gaskets
« Reply #2 on: March 12, 2026, 10:05:43 PM »

Yes to the comment above. My understanding is that olovisk just refers to the colour.  It is some sort of industrial gasket material.
There is another material which you find on most modern Italian boxes which is a woven fabric with a felted surface.  You could try asking accordion repairers in your part of the world.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeezebox Of Delights

  • Good talker
  • **
  • Offline Offline
  • Posts: 81
Re: Reed Block Mounting Gaskets
« Reply #3 on: March 12, 2026, 10:32:33 PM »

I've used this on old gasket replacements for reed blocks & worked fine,you need to glue it yourself as it isn't self adhesive.
I think olovisc was a made up mane for marketing  ;D

https://www.ebay.co.uk/itm/225971974267?chn=ps&_ul=GB&var=525069531614&norover=1&mkevt=1&mkrid=710-166974-033325-9&mkcid=2&mkscid=101&itemid=525069531614_225971974267&targetid=2274951440814&device=c&mktype=pla&googleloc=9045989&poi=&campaignid=22689575662&mkgroupid=184880692767&rlsatarget=pla-2274951440814&abcId=10356319&merchantid=114903095&geoid=9045989&gad_source=1&gad_campaignid=22689575662&gclid=EAIaIQobChMIsPmI8aObkwMV-IlQBh3K9x3VEAQYAiABEgI0mPD_BwE
Funnily enough, I was just about to ask this same question. I need to add gaskets to one of my boxes, and was confused by the seemingly mythical olovisc, so it's great to know that there's a readily available alternative. What thickness would you recommend?
Logged
Oops! All Hohners

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Reed Block Mounting Gaskets
« Reply #4 on: March 13, 2026, 08:14:58 AM »

Car wash chamois. Buy full hide and use the back, where it's thicker and denser. Check it against a light source & avoid deep scars.

Simples!
Logged

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Reed Block Mounting Gaskets
« Reply #5 on: March 13, 2026, 10:17:48 PM »

I've used this on old gasket replacements for reed blocks & worked fine,you need to glue it yourself as it isn't self adhesive.
I think olovisc was a made up mane for marketing  ;D

https://www.ebay.co.uk/itm/225971974267?chn=ps&_ul=GB&var=525069531614&norover=1&mkevt=1&mkrid=710-166974-033325-9&mkcid=2&mkscid=101&itemid=525069531614_225971974267&targetid=2274951440814&device=c&mktype=pla&googleloc=9045989&poi=&campaignid=22689575662&mkgroupid=184880692767&rlsatarget=pla-2274951440814&abcId=10356319&merchantid=114903095&geoid=9045989&gad_source=1&gad_campaignid=22689575662&gclid=EAIaIQobChMIsPmI8aObkwMV-IlQBh3K9x3VEAQYAiABEgI0mPD_BwE
Funnily enough, I was just about to ask this same question. I need to add gaskets to one of my boxes, and was confused by the seemingly mythical olovisc, so it's great to know that there's a readily available alternative. What thickness would you recommend?
anything up to 1mm will be fine for hohner boxes, if not thick enough you can always add on top of the block to stop wobbling.  mine is 0.07mm.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reed Block Mounting Gaskets
« Reply #6 on: March 14, 2026, 11:13:10 AM »

I suppose that gaskets in between the blocks and the fondo soften the sound of the reed. Do we think that that is why manufacturers use them, as well as being cheaper than making the blocks a good fit? Has anyone done away with the treble side gaskets and could tell us if the change in sound was appreciable?
I'm aware that my 114's (on MM) sound quite differently to my 1040's, even though they both have glued in blocks. (Yes, I know that the reeds are mounted differently too.) But, to me, they both sound differently again to my boxes with gaskets!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal