Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: How to add a reed for a three reed bass?  (Read 553 times)

0 Members and 1 Guest are viewing this topic.

Torsten Feurstein

  • Member
  • *
  • Offline Offline
  • Posts: 9
How to add a reed for a three reed bass?
« on: March 19, 2026, 01:50:10 PM »

I have old Hohner 21/8 project box with the standard bass mechanism. I'm thinking of adding one reed per bass note e.g adding a C4 to the existing C2 and C3 basses. I find three reed basses to sounds nicer than two.
My plan is to add a row of reeds above the chords reed block, with their own reed block, levers and pallets and then link the levers with the existing mechanism. Similar to how a box would look where there is reed sharing between basses and chords.  Maybe would it be easier to modify the chords pallets and set up reed sharing? There are no thirds reeds, so there is some extra space for modification on the chord reed block or pallets.

Has anyone done something similar? Any suggestions?
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: How to add a reed for a three reed bass?
« Reply #1 on: March 20, 2026, 08:10:41 AM »

Even if there is enough space in the box (which might not be the case, once you start modding), I'd say this is a major surgery and very high difficulty project, unless somebody has done this exact mod before and can confirm that it works & is straightforward for the given box.
Logged

Torsten Feurstein

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: How to add a reed for a three reed bass?
« Reply #2 on: March 22, 2026, 01:40:37 AM »

I've found where I must have gotten the idea from. An Albrecht Hohner modification.
https://youtu.be/HYdsQfLyan0?is=zoIwtOUEqcJfKzT3

To answer my own question: New reed block for the bass notes.
Not having seen inside the Albrecht conversion, I'm guessing low basses on top, like Pariselle.
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: How to add a reed for a three reed bass?
« Reply #3 on: March 22, 2026, 09:30:53 AM »

Yes, that's right but you'll need chimney blocks to supply the air to the top reeds.
This is how I did it. You can also see the slides for the stops to take out the low reeds and the chord thirds.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Torsten Feurstein

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: How to add a reed for a three reed bass?
« Reply #4 on: March 25, 2026, 12:22:40 PM »

Thank's a lot for the picture!
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: How to add a reed for a three reed bass?
« Reply #5 on: March 25, 2026, 01:56:34 PM »

That block arrangement is as pretty as a picture, and a great solution to the height restriction. But aren't those inside reeds a bit muted?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: How to add a reed for a three reed bass?
« Reply #6 on: March 25, 2026, 04:36:50 PM »

They don't seem to be.
I have the same arrangement in my Pariselle and it has a pretty powerful bass, though it's full on all the time as there is no stop.
You might need to enlarge the holes, maybe squaring them as ideally you want 50% more air available.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal