Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Changing reed pitch  (Read 993 times)

0 Members and 1 Guest are viewing this topic.

Steve M48K

  • Member
  • *
  • Offline Offline
  • Posts: 9
Changing reed pitch
« on: March 29, 2026, 07:33:51 PM »

I've had a frustrating time finding a cheaper DG melodeon. If they are so popular for UK folk music why are so many melodeons available in the UK in different keys?
I've done some repair work to my piano accordions and a little fine tuning so I'm considering getting a cheap box in CF, perhaps and altering it to a DG. I'm guessing it is easier to move the reeds and replace the 'wrong' ones than retune the whole lot(?) but it put the question in my head about how much you can move a reeds pitch? A whole tone would seem excessive, but would a semitone work?
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Changing reed pitch
« Reply #1 on: March 29, 2026, 07:54:36 PM »

The DG has only been popular since the 1970s, and then only within a niche market (English Morris/trad). Most random melodeons  that turn up for sale predate this, from an era when accordions in general were more popular, including semitone (or ‘British Chromatic’) boxes in BC or CC#, hence their abundance… It’s a fairly big job retuning from CF to DG and probably costs a £few hundred to get done professionally… Lower reeds can be tuned more than higher. I just tuned a D bass reed up to G but I don’t think this is generally advised!..
« Last Edit: March 29, 2026, 08:20:13 PM by Arnold »
Logged
Dancing about architecture since 1997

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Changing reed pitch
« Reply #2 on: March 30, 2026, 08:37:07 AM »

Why not get a decent CF box for not too many spondoolicks, and just enjoy playing a CF box? :||:
There's also EB and AD that tend to be underrepresented in the UK, but are great fun to play.

The only time re-tuning is justified, imho, is if you have a set of unique, and/or very high quality reeds + you really know what you're doing so you're confident you're not going to ruin them. Amount of labour involved in a re-tune is huge and most reeds are not worth the hassle.
« Last Edit: March 30, 2026, 08:40:07 AM by mChavez »
Logged

Steve M48K

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Changing reed pitch
« Reply #3 on: March 30, 2026, 09:43:31 AM »

I play mostly Morris/ folk tunes which are usually in G or D - I guess I'm in that niche!

I usually play piano accordion, but I'm trying to see if I can do the tunes on melodeon. The Weltmeister is playable but its sound isn't that appealing so I'd like to get something a bit better. The Chinese or Czech boxes are available but advice seems to be to go for a second hand Hohner. You can pick up CF boxes cheap, but DG ones are often 3x the price.  A lot of the older DG boxes may well need valves replacing etc. So it's going to cost more to sort them out.

I'm possibly looking at a Sandpiper or Delicia DG but the forum says to go for Hohner, so the other option is maybe go for a ADG which seem more affordable.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Changing reed pitch
« Reply #4 on: March 30, 2026, 10:39:17 AM »

Sandpiper can be ok, but can vary in playability between individual instruments so best to try before you buy.  Delicia bed avoided in my experience.

There is usually a reason why cheap instruments are cheap.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Changing reed pitch
« Reply #5 on: March 30, 2026, 01:14:37 PM »

I think if you want DG then get a DG…CFs are not that much cheaper if they are properly fettled… Have you played the Welty side by side with a Hohner? If it has steel reeds on aluminium plates I wouldn’t expect it to be all all that different in sound and response. I have an early 90s Welty D ‘Cajun’ and the equivalent reeds sound fine. I once had a random junk Welty in GG# with brass reeds sharing reedplates, which was not so good!..
Logged
Dancing about architecture since 1997

Steve M48K

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Changing reed pitch
« Reply #6 on: March 30, 2026, 05:38:32 PM »

Thanks for the replies.
I haven't compared mine side by side with anything. I play alongside a Castagnari which obviously sound miles better and listen a lot to Spiers and Boldon with John playing a lot on Hohners before using Saltarelles, I think and others.

Most of the time I'm looking at mail ordering something, so I can't try it first. I guess if I went via Hobogoblin or an accordion shop they'd have a return policy.

There's usually plenty of CF Hohner Ericas on ebay, with some dent looking ones around £250 and a few more at £300ish. The few that show the insides look like the valves need replacing.
There's one DG at the moment at £750 which is more than the one Theo sold recently and I doubt is in as good a state. It's really a bit more than I want to spend just now.

I was just curious about how much reed pitch can be shifted, having watched lots of Lester repair vids and done a bit of work on my own PAs.
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Changing reed pitch
« Reply #7 on: March 30, 2026, 06:56:41 PM »

Decent looking doesn’t really count for much without seeing the reedplates inside…

Hobgoblin had a really nice DG Pokerwork recently for £550, but it had low notes instead of accidentals which would rule it out for me personally… They currently have a lovely looking ADG Corona, which at £350 appears to offer very good value for money (I’m a little  tempted myself…), however any reedwork etc is likely to cost 50% extra…

The Casta will of course sound very different due to the dry tuning, which might be part of the appeal to you (my taste goes the other way).

Can you confirm whether your Welty has steel on aluminium reeds? If so and if it were my box, I would isolate the banks of reeds and gap them for maximum responsiveness before fine tuning them. To decrease the tremolo, the M+ reeds would be scraped towards the rivet end. I have done this with several boxes now, although I’ve come to prefer Hohner tremolo (around 18 cents at A440Hz)
 
Logged
Dancing about architecture since 1997

Blenchy

  • Blenchy
  • Good talker
  • **
  • Offline Offline
  • Posts: 74
  • What do you mean it's upside down?
Re: Changing reed pitch
« Reply #8 on: March 31, 2026, 11:38:58 AM »

I've done a couple of CF to DG conversions now, it can definitely be done without buying new reeds if you fancy a fair bit of tuning. Time consuming, not difficult and possibly even fun! I've also done CC# to DG before. Less fun and with only about 90% of the original reeds. All doable but it just depends how committed you are to doing it yourself.

That being said, I do have a DG pokerwork I'm about to put up for sale. Aesthetically I'd describe it as rough and ready but it plays quite lovely. A bit off topic but what's your budget? Or feel free to send me a PM and we can discuss  ;D
Logged
David Blench - Sheffield

Hohner Pokerwork and Laurel D/G, 3 Voice Galotta D/G, Old 12 bass Hohner Bb/Eb, 4 Voice "Foreign" C one row. Some concertinas and many more boxes in bits

Part of Handsworth Sword and Rumworth Morris

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Changing reed pitch
« Reply #9 on: March 31, 2026, 12:32:17 PM »

These are my maps for C?f to 4th button D/G. May be of help

Steve M48K

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Changing reed pitch
« Reply #10 on: April 12, 2026, 08:34:34 PM »

Thanks for the tips Arnold. The Casta has a better tone. I think the owner doesn't like wet tuning - he said he didn't like Hohners. I think it is one with one set of reeds.

My Welty has steel reeds on aluminium plates. It likes quite clean an new inside. I was expecting it to need new pallets, but it looks good. It's one without the name on it. I'm not sure if that dates it? I'd guess 90s.

The current vibrato sounds a little too fast to my ear. It was tuned so isn't too bad but it's a little uneven so certain notes stand out.

My budget? I don't want to pay a lot. I got given a PA then bought a cheap small one from ebay. I did a few repairs to it myself. Then bought a 72 bass Hohner again cheap on ebay. under £200 each time. I did replace bellows tape, bellows gasket tape and treble pallets. I've replace bass valves and any in the treble that needed it. After it was tuned some notes were left a bit wild so I've tuned it myself. The Welty was under £200.

So I'm willing to get a cheap box and spend some time repairing it. It's more interesting/ fun than just buying a brand new box. You can pick up C/F etc boxes for around £200. D/G seem to be around £400 occasionally with more at £650-£750 for something like an Erica. It's a bit more than I'd want to pay.
It's tempting to go for a Sandpiper or Delicia that can be under £500 on ebay, but the forum seems to say not to .

The PA will probably be my main box, so this is just a side project for now.
« Last Edit: April 12, 2026, 08:55:20 PM by Steve M48K »
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Changing reed pitch
« Reply #11 on: April 13, 2026, 05:03:53 PM »

By the sounds of it, given that you have some experience, you could focus on optimising the performance of the Welty… This means gapping the reeds for optimum response (pushing into or pulling through slots to decrease gaps), and then tuning them to your preference (using file, scraper, reed support, Italian hook…) Tutorials can be found on YouTube of course. I would go easy on tremolo reduction at first (maybe try 4 beats per second at A4 ie 4Hz/16 cents).

I am part way through a similar process on a Chinese Hohner Double Ray BC, and it is now responding as well as any other box, whereas before it was sluggish (I hope to demonstrate when I have done permanent conversion to Joe Burke layout and fine tuning) … I have worked on my Welty one-row before (altering Cajun tuning and tremolo), and I think the reeds may be a little softer than Hohner…
Logged
Dancing about architecture since 1997

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Changing reed pitch
« Reply #12 on: April 14, 2026, 11:49:58 AM »

Maybe and maybe not to the point of the OP, the solution to pitch and D/G is bandoneon tuning.
The bandoneon tuned D/G is Gods Gift to the melodeon.
Not to exaggerate but I no longer have my AD Laura or CF Erica for their lower pitch. 
IMHO.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Changing reed pitch
« Reply #13 on: April 16, 2026, 06:57:35 AM »

These are my maps for C?f to 4th button D/G. May be of help

Thanks for this Lester. I've got a 'solution' somewhere but not like this. Fab.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal