Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: old hohner with student 1 type bass buttons  (Read 540 times)

0 Members and 1 Guest are viewing this topic.

Marien Lina

  • Member
  • *
  • Offline Offline
  • Posts: 20
old hohner with student 1 type bass buttons
« on: April 08, 2026, 09:20:05 PM »

Lately I picked up this project of an old Hohner, dimensions are the same as a pokerwork. I liked the colours of it, it has an orange/goldy glittering appearance, so I think I am going to refurbish it. I guess the glittering orange is an early Hohner experiment with kind of plastic. I am guessing this one may date from the thirties, or even the twenties?? It appears to be in AD tuning, and the body needs a lot of work, as it is warped a bit...

As for the bass buttons: you can see it on the photo, the bass buttons on the outer row are placed higher than the ones on the inner row, whereas a pokerwork has both bass rows the same height. So I am thinking about filling the holes of the outer bass row and drilling new holes on the same height as the inner row. So I am asking advice about this, should it be corrected or would you leave the button positions as is?

Thanks for any comment,
Marien
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: old hohner with student 1 type bass buttons
« Reply #1 on: April 08, 2026, 10:41:42 PM »

The metal action was introduced in 1929/30 so I would estimate that is from the early 1930s.  Hohner were prolific in producing new finishes at that time, both celluloid and painted.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: old hohner with student 1 type bass buttons
« Reply #2 on: April 09, 2026, 10:05:54 AM »

A better idea would be to make a new wooden plinth for the inboard buttons then you can put it whare you want. Make it slightly oversized then if there's a shadow line created by the original piece you can fit it symmetrically and still cover the original telltale edge.
Depends on how original you want it to look.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

penn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
Re: old hohner with student 1 type bass buttons
« Reply #3 on: April 09, 2026, 02:53:49 PM »

I have a similar age, model 3515, pokerwork size 8bass 2 row, that has the offset bass. From what I’ve seen they offered both in those days and the offsets aren’t terribly unusual. I don’t have any trouble adjusting to playing it, i perhaps tilt the box slightly differently, but it feels comfortable very quickly.
Gren
Logged
Hohners, Dino Baffetti, Lilly, Benny + a lot of junk.

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: old hohner with student 1 type bass buttons
« Reply #4 on: April 09, 2026, 04:01:49 PM »

I would tend to take the lazy approach: leave the buttons as they are for now and see how it works for you. If it -really, really- bothers you after a while, then yes, reposition them. I mean, the buttons have been that way for almost a century and no one felt a need to 'correct' their position, so no rush.

Just my 2 cents.

Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: old hohner with student 1 type bass buttons
« Reply #5 on: April 10, 2026, 08:04:27 AM »

What Tirpous says.

Marien Lina

  • Member
  • *
  • Offline Offline
  • Posts: 20
Re: old hohner with student 1 type bass buttons
« Reply #6 on: April 10, 2026, 02:04:32 PM »

Thanks all for the comments, I think my favorit approach is the lazy one... Changing button positions also would ask for changing some metal strips between the button and the action board.       
Thanks again...
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal