Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Restoring an old 2 row Milano Organetto Melodeon  (Read 1950 times)

0 Members and 1 Guest are viewing this topic.

mbnaegle

  • Member
  • *
  • Offline Offline
  • Posts: 42
Restoring an old 2 row Milano Organetto Melodeon
« on: April 22, 2026, 03:18:50 PM »

New member here from southeast Texas USA. First off, I'm still learning to play. I come from a brass background playing trumpet and euphonium, but am still getting the hang of playing a button board and squeezing a box, so like many of my other interests I figured I'll find an online resource to learn from and hopefully eventually offer some meaningful contribution. I inherited my interest in accordions from my late father, who gathered a few instruments but never got too far learning them. I've got a piano type accordion that's fully working, and a couple button type melodions that need a lot of work.

One of the melodeons is a single row Champion made in Germany. It's complete and can put out some notes, but the button don't seal well and the bellows are stiff. I'll start a separate thread about it, but I'm considering sending it to a professional.

The other melodeon I'll cover here. It's an old two row Millano Organetto made in Germany. It's in rougher condition and from my discussions with melodeon shops in the past, it might be hard to find someone to work on it. Both of these melodeon's fall into the category of needing more work/money than they are worth. I'm not wealthy, but for me they are worth the investment due to sentiment, principal, and my general interest in restoring things. My family manufactures and services leatherworking machinery, and as such I have gathered a lot of tools and skills in working with metal, wood, leather, etc. and in finding ways for old technology to stay relevant and work together with new technology. I know my limits though and while I know enough to figure out a lot of skills and crafts, I try to take my time and do things right. I enjoy doing things traditionally, gaining skills, and putting in some work to get things done.

This Milano is mostly complete and working. It's bellows move easily, but it has leaks. It's biggest issue I see is that one of the reed plates is missing. I'm planning to find another donor Milano to use the plate from, as well as some other less critical missing or damaged parts. The other things like repairing and refinishing the wood, replacing seals, getting the buttons moving well, etc. I think I know enough to jump into, but I'm more than grateful for any advise and critique anyone could offer. Pictures to come!
Logged
"Beware of permanent solutions to temporary problems"

"We do this not because it is easy, but because we thought it would be easy!"

mbnaegle

  • Member
  • *
  • Offline Offline
  • Posts: 42
Re: Restoring an old 2 row Milano Organetto Melodeon
« Reply #1 on: April 22, 2026, 05:30:44 PM »

Here are some pictures.
« Last Edit: April 30, 2026, 09:04:41 PM by mbnaegle »
Logged
"Beware of permanent solutions to temporary problems"

"We do this not because it is easy, but because we thought it would be easy!"

mbnaegle

  • Member
  • *
  • Offline Offline
  • Posts: 42
Re: Restoring an old 2 row Milano Organetto Melodeon
« Reply #2 on: April 22, 2026, 05:31:24 PM »

More pictures
« Last Edit: April 30, 2026, 09:05:33 PM by mbnaegle »
Logged
"Beware of permanent solutions to temporary problems"

"We do this not because it is easy, but because we thought it would be easy!"

mbnaegle

  • Member
  • *
  • Offline Offline
  • Posts: 42
Re: Restoring an old 2 row Milano Organetto Melodeon
« Reply #3 on: April 22, 2026, 05:44:39 PM »

And one more (getting the hang of this forums mechanics)

You'll see that the bellows are very worn, but fortunately the cardboard, corner aglets, and leather diamonds all look to be in good shape, so I'm optimistic that a good cleaning and new edge tape will save it.

The boxes that the ends of the bellows attach too originally were covered in black paper with the manufacturers info stamped in silver. Unfortunately it's almost completely worn away. I have the equipment to re-stamp it, but custom dies will be very very expensive so I think I'll leave it blank after the paper is replaced. I want it to be as close to original as possible, but in this case I might supplement the original stampings with some painted detail customization.

The clamps that hold the button boards to the bellow boxes will need some work. There's a couple missing pieces and one of the "lyre's" is broken, having been soldered in the past. I'm hoping to get these pieces from a donor unit, but if not can machine replacement parts and do a better job fixing the solder.

You can see the missing reed plate in one picture. Someone did some work on this unit in the past using light blue felt to reseal the button boards and replace a lot of the reed flaps. It seems way to flimsy, so I plan to replace those with thin leather like I believe it was.

The buttons all work and the springs are all intact, but some buttons get stuck easily. I think when I take it apart to replace the seals, cleaning out the button slots will help. One of the mother-of-pearl buttons is broken, but not sure yet if I'll attempt to replace it or just leave it for character. I've got an old cornet that needs a mother-of-pearl insert replaced on a button, so it might be good to learn how to work with that material.
Logged
"Beware of permanent solutions to temporary problems"

"We do this not because it is easy, but because we thought it would be easy!"

mbnaegle

  • Member
  • *
  • Offline Offline
  • Posts: 42
Re: Restoring an old 2 row Milano Organetto Melodeon
« Reply #4 on: April 22, 2026, 09:26:15 PM »

If anyone knows, I'd be interested in determining the age of this piece. I've seen similar ones online said to be from the 1880's up to the 1920's with no clear evidence of the stated age.

Most all of the reeds I've seen online look to be made of steel and these are brass. Is there a reason for the material used? If I can't find a donor unit, I'm confident I can fabricate a replacement. Cutting the pieces and riveting them together would be the easy part, but it'll take some trial and error to get the right note/tone. Hopefully it doesn't come to that.

I've started sourcing materials and so far have a new can of Pliobond glue coming. I plan to use it for the seals, reeds, and other semi-flexible parts, then I'll use PLA glue for the rigid parts. I'm also getting a can or red mahogany stain/varnish to touch up where the wood has worn. Over that I'll give give it a coat of clear polyurethane varnish to blend the new and old wood finishes together.

Bellows tape, reed wax, and grill fabric are also getting ordered shortly.

For the valves and button seals I plan to use leather. I've looked at a couple of sources selling kits, and haven't found the exact dimensions or quantities I'm seeing on this piece, so I'm planning to make my own. I already have a hide put aside that I'll cut into workable sheets and I have a band-knife splitting machine to cut the sheets to the desired thickness (using the original seals for reference). I considered going with plastic seals, but the odd dimensions gave that idea pause. In addition to keeping the construction authentic with the leather, I don't mind the prospect of servicing the seals again in the future.

For the black paper on the bellows end boxes, I'm going to pick something out at the local craft store, preferably black but something with an embossed design isn't out of the question. I don't want it to stick out too much, but since it won't be original I'd rather it be clearly custom. My family emigrated from Bavaria in the 1830's and they grew grapes and made wine before moving on to other agricultural endeavors here in America. The family had been in the wine business for centuries before then and to pay some homage to them I was thinking about painting something along the lines of grape clusters on the black paper. Part of my interest in these old German melodions is to learn to play traditional European folk music to reconnect with my ancestry. I also have English, Scottish, and Danish ancestry, so lots of musical research to do!

I'm also planning on making a case for this melodeon, either out of solid leather, or canvas over plywood. My dad had a business restoring and reproducing vintage travel trunks for a time and we still have a lot of old hardware for them, so I think a micro-steamer trunk just big enough for this melodeon and some sheet music would be a fun and fitting project (latter though. Got to get it working first!)
Logged
"Beware of permanent solutions to temporary problems"

"We do this not because it is easy, but because we thought it would be easy!"

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Restoring an old 2 row Milano Organetto Melodeon
« Reply #5 on: April 23, 2026, 01:11:05 PM »

Hello mb:
someone needs to jump in and make sure you have taken a reality check.
you do realize that you are dumping a lot of money into a bottomless pit of love?
your end product will be marginal at best and have no value except to you (?)
but if you want a labor of love, you have entered melodeon madness, no question.
-- Steve
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Restoring an old 2 row Milano Organetto Melodeon
« Reply #6 on: April 23, 2026, 01:27:34 PM »

Most all of the reeds I've seen online look to be made of steel and these are brass. Is there a reason for the material used?

Brass was used because at the time it was easier to work than steel, and helped to keep price low. Other things being equal steel reeds are louder than brass, and are more durable.

Hello mb:
someone needs to jump in and make sure you have taken a reality check.
you do realize that you are dumping a lot of money into a bottomless pit of love?
your end product will be marginal at best and have no value except to you (?)
but if you want a labor of love, you have entered melodeon madness, no question.
-- Steve

True, but it's all a good learning experience for someone who enjoys fixing things.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mbnaegle

  • Member
  • *
  • Offline Offline
  • Posts: 42
Re: Restoring an old 2 row Milano Organetto Melodeon
« Reply #7 on: April 23, 2026, 03:24:17 PM »

Thanks for the input. That makes sense with the brass being cheaper/easier to make while steel being more durable.

Yes, I realize the time/money/resources it'll take to make this instrument work again outweigh it's monetary value, but that's not an issue to me. I do enjoy the process of repairing and restoring things and often find it gives me a better understanding of how they work, what they are capable of, etc. I'm probably a little bit OCD as I enjoy seeing things that were once broken or in disarray come together again, particularly if they are old and of US or European origin, as for me it gives a connection with my ancestry. Like keeping pieces of the past alive.

I've got more projects than I can count, but my track record has been pretty good. I try not to put deadlines on stuff If I can as that helps me to spread my resources out to a manageable level. I'm still young (about to turn 38) and I've got a wife and kids to take care of, so If something is going to cost more than is in the budget, it just slows down until I can afford it or learn to DIY things. There have been very few projects I had to give up on or stop indefinitely. Years ago I found a pair of garden clippers that were rusted solid, jaws bent, heavily pitted, all the bad stuff, and I decided I'll just stick them in the flower bed for yard art. That was a mistake as they were staring at me every time I turned on the faucet and they eventually wore me down. Earlier this week I pulled them out and it seems like everything just aligned perfectly to bring them back. They came apart a lot easier than expected after a bath in rust remover. The bends straightened out with the help of a torch. I welded up the worst of the pitting on the blades and ground it smooth, and now they're a decent pair of clippers! Still heavily pitted, but they're sharp and do what they're meant to (picture attached, though I have a bad habit of not always getting "before" pictures). I looked on eBay and found a pair exactly like them for around $25 with shipping, but the repair only utilized tools and materials I already had so only cost a couple hours of time. I don't need to have all the toys, but want to be a good steward to the ones that come my way.

I certainly could strike-out with this melodeon. Even a successful repair could leave me with one that doesn't sound quite right, but If it "works" and can play some music, I'll enjoy it just knowing I had a hand in keeping it alive, and I can always get something that works better later. The education it gives could just end up as entertainment, or it could help more important projects down the road.
Logged
"Beware of permanent solutions to temporary problems"

"We do this not because it is easy, but because we thought it would be easy!"

mbnaegle

  • Member
  • *
  • Offline Offline
  • Posts: 42
Re: Restoring an old 2 row Milano Organetto Melodeon
« Reply #8 on: April 23, 2026, 07:09:40 PM »

Doing some research I've found a little more information. On another thread on here, it was brought up that these Melodeons were sold through Sears and Roebuck, and they posted a clip from a 1912 catalog (attached). I also found that the German "D.R.G.M. 362041" trademark registration that is stamped on all of these Milano Organetto's was only in use up till 1952. After that it would have read D.B.G.M.

I also found a couple of pictures of customized Milano Organetto's for inspiration. The painted one is a little more than I like, but it shows the contrast the paint can offer.

I also just bought another Milano Organetto to use as a donor! I'll post pictures when it arrives. It's rougher than mine, but it has the external pieces I need, and I'm taking a gamble it'll have my missing reed plate. The bellows appear to be in worse shape, but the manufacturer stamping on the bellows end boxes is more intact, so I might see if there's a way to transfer them over to mine.
« Last Edit: April 23, 2026, 07:14:30 PM by mbnaegle »
Logged
"Beware of permanent solutions to temporary problems"

"We do this not because it is easy, but because we thought it would be easy!"

mbnaegle

  • Member
  • *
  • Offline Offline
  • Posts: 42
Re: Restoring an old 2 row Milano Organetto Melodeon
« Reply #9 on: April 23, 2026, 07:59:22 PM »

Something else I just learned, is that this Melodeon is tuned as a D/G scale. It has a tag on the side that I assumed was an owners initials, music shop name, or something like that, but others had the same tag and I realized what it meant. It does have something else scratched into the tag, but I haven't made it out yet.
Logged
"Beware of permanent solutions to temporary problems"

"We do this not because it is easy, but because we thought it would be easy!"

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Restoring an old 2 row Milano Organetto Melodeon
« Reply #10 on: April 23, 2026, 09:10:01 PM »

I'd be surprised if that D&G tag is related to the key of the instrument. It's more likely to denote the importer or retailer of the instrument.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

mbnaegle

  • Member
  • *
  • Offline Offline
  • Posts: 42
Re: Restoring an old 2 row Milano Organetto Melodeon
« Reply #11 on: April 23, 2026, 09:43:35 PM »

Here's a cleaner clip from the 1912 Sears Catalog. It reads:
******
Milano Organetto Accordions

Are the product of one of the best manufacturers in Germany. In the past years the Italians
were the only ones capable of producing these instruments with that peculiar organlike tone,
clear melody and deep bass which is sought by all accordion players. However, their methods
of manufacturing, being slow and expensive, would not permit the instrument to be sold at a
price within the reach of the average accordion player. The maker of the instrument we are
offering, after spending several years in Italy studying their methods of tuning and voicing,
has succeeded in producing an instrument equal in tone to the instrument produced by the
Italians, with brilliant melodious notes and deep sonorous basses, and resembling an organ

In tone to such an extent that the name "Milano Organetto," or "Little Organ of Milan"
has been adopted by the manufacturer as his trade mark. By employing modern methods
and machinery the cost of production has been reduced to a minimum, and by a special
contact we are able to offer to our customers these superb accordions at prices far below
what is ordinarily charged by dealers for accordions of inferior grade with no (?)
whatever. We recommend these accordions very highly, as they are made according to
best principles of construction and we will take back any instrument that may play
unsatisfactory for any reason whatsoever. Complete with instruction book.

******

The four options given include a single row with four basses, double row with 8 basses, double row with 12 basses, and triple row with 12 basses. The description for my double row 8 bass reads:

******
Size, 6x11x9 1/2 inches (Keyboard excluded.)
Body, imitation rosewood, beautifully pol-
ished. Bellows, fourteen folds of fine leath-
erette cloth with metal corner protectors.
Panels cut with fancy scrollwork backed with
colored cloth. Twenty-one keys, eight bases.
Mother or pearl buttons screwed to the bars
(not nailed as in low grade accordions). and
the bars covered with white celluloid. Fitted
with new patent lyre shaped clasps with
thumbscrews, permitting the instant removal
of the frame from the bellows for repairs or
cleaning purpouses. Highly nickel plated
trimmings. Leather straps, flannel lined.
This is a first class instrument
in every respect. Weight boxed
for shipment, 12 pounds.

No. 12H1093 Price........... $6.40

******

Some fun information! Lot of salesmanship going on, but still neat to read the original details. I like how at one point in the next model it claims "German silver," and at another "nickel plated." Could be both on different parts, a little tarnish polish may reveal, but I'm expecting it to all be nickel. The grill was apparently lined in green cloth, at least on the next model, and mine has faded to dirty tan, but that's a detail I can fix with the new cloth. It's interesting how much effort they put into selling the appearance of the piece, without giving more useful details like the chord it's built/tuned in.

In the same catalog, they also sold Beaver and Hohner accordions, and as I understand how many of these old supply companies used to run, they probably sold them as a "good, better, best" in the order of Beaver, Milano Organetto, Hohner, but in the end they were all coming out of the Sears Robuck catalog.
« Last Edit: April 23, 2026, 10:40:09 PM by mbnaegle »
Logged
"Beware of permanent solutions to temporary problems"

"We do this not because it is easy, but because we thought it would be easy!"

mbnaegle

  • Member
  • *
  • Offline Offline
  • Posts: 42
Re: Restoring an old 2 row Milano Organetto Melodeon
« Reply #12 on: April 23, 2026, 09:48:47 PM »

I'd be surprised if that D&G tag is related to the key of the instrument. It's more likely to denote the importer or retailer of the instrument.
That's what I thought too, but other Millano Organetto's I've seen had the same tag reading D&G, with a few marked C&F and A&D, which is why I think it's related to the key.
Logged
"Beware of permanent solutions to temporary problems"

"We do this not because it is easy, but because we thought it would be easy!"

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Restoring an old 2 row Milano Organetto Melodeon
« Reply #13 on: April 23, 2026, 11:43:37 PM »

Well blow me down wiv a fevah!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: Restoring an old 2 row Milano Organetto Melodeon
« Reply #14 on: April 24, 2026, 12:47:05 AM »

I like how at one point in the next model it claims "German silver," and at another "nickel plated." Could be both on different parts, a little tarnish polish may reveal, but I'm expecting it to all be nickel.

It's probably some form of cupronickel alloy. 'German silver' is the name of a decorative finish – it doesn't contain any silver, it's just made to resemble it. Analogous to Pinchbeck, I guess, an alloy that resembles gold.

Logged
Vintage Double Ray C#/D

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Restoring an old 2 row Milano Organetto Melodeon
« Reply #15 on: April 24, 2026, 09:47:47 AM »

Donor box is a great idea for sources of parts.  Especially from that vintage.
OP has gone from 0-60 in melodeon-madness in record time.  :Ph
(forgot to recognize the fun value, absolutely)
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Restoring an old 2 row Milano Organetto Melodeon
« Reply #16 on: April 24, 2026, 11:48:09 AM »

I've come across many of these key signature plates. The design seems invariably the same, so I conclude that they all come from the same supplier. C/F and A/D are common, whereas D/G not so. Perhaps Rees and others haven't seen them because they're usually attached to the rubbishy things which they haven't much dealt with?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mbnaegle

  • Member
  • *
  • Offline Offline
  • Posts: 42
Re: Restoring an old 2 row Milano Organetto Melodeon
« Reply #17 on: April 24, 2026, 02:49:10 PM »

Donor box is a great idea for sources of parts.  Especially from that vintage.
OP has gone from 0-60 in melodeon-madness in record time.  :Ph
(forgot to recognize the fun value, absolutely)
Thanks for humoring me, lol. I'll be honest, there's a part of me that wants to save them both, if only due to the age and they can't be getting any more plentiful. Despite what the Sears salesmen wrote above, they're not a high end unit and don't command any value in that regard, but for someone like me who's just getting started or is more casual in their skill, I think there's a place for antique commodity grade instruments that are in good condition. I think after a certain age, all antiques deserve some care and respect.

So far, between my investment in the donor unit and what I'm pricing materials at, I'll have about $250 invested in this project, but that doesn't include time or utilizing the tools and resources I already have. If I were to make a career out of restoring Milano Organetto's, I'd go broke really fast, but I think it's a worthwhile hobby if I balance the checkbook with my own entertainment. The practical/logical side of me says to just focus on mine and "don't be a hero" trying to save them all, but there's a good chance this won't be my last Melodeon project, and it looks like almost all of the materials and skills used will transfer over to better instruments.
Logged
"Beware of permanent solutions to temporary problems"

"We do this not because it is easy, but because we thought it would be easy!"

mbnaegle

  • Member
  • *
  • Offline Offline
  • Posts: 42
Re: Restoring an old 2 row Milano Organetto Melodeon
« Reply #18 on: April 24, 2026, 03:29:05 PM »

I like how at one point in the next model it claims "German silver," and at another "nickel plated." Could be both on different parts, a little tarnish polish may reveal, but I'm expecting it to all be nickel.

It's probably some form of cupronickel alloy. 'German silver' is the name of a decorative finish – it doesn't contain any silver, it's just made to resemble it. Analogous to Pinchbeck, I guess, an alloy that resembles gold.
Thanks that makes sense. Researching a little more, it looks like nobody electroplates "true" German silver any more, at least not the same alloy that would have been done 100 years ago. Since they look to have some corrosion, I think the plan for my pieces will be to give them a decent rouge polish and seal them with clear varnish, but if anyone was wanting to restore hardware like this, I think a common nickel plating would be the closest to 'German silver' you can do, and it's one of the more economical plating's anyway. I read somewhere too that one process used for things like cheap cutlery would be to nickel plate and then give that a very thin silver plating. Essentially making the cheapest "silver" plating possible.
Logged
"Beware of permanent solutions to temporary problems"

"We do this not because it is easy, but because we thought it would be easy!"

mbnaegle

  • Member
  • *
  • Offline Offline
  • Posts: 42
Re: Restoring an old 2 row Milano Organetto Melodeon
« Reply #19 on: April 29, 2026, 04:00:27 PM »

I picked up some materials from the local craft store and started working on the bellows. For the end boxes of the bellows, I found some black paper that has the same faux-fabric embossed pattern as the old material, but it was a little stiffer than I liked, so I also bought some thin but tightly woven black fabric and that's what I ended up using as it will form to the wood better and be more durable.

I removed the hardware first, and with the corner brackets off found that a couple of joints needed to be glued back together. I decided to leave the original paper in place and glued the fabric over the top of it with PVC glue. I cleaned the paper lightly with lacquer thinner to remove some old tape residue and ensure there was no oil present. After that, I reattached the corner brackets and key plate and I will give the ends a coat of clear varnish next (not on the bellows itself). Because it's going to be sealed, I decided to go ahead and paint the custom detailing so it will also be sealed. It was done in acrylic paints, and I think I could keep adding detail, but it might be good to stop where it's at now. The "German silver" corner brackets and key tag I soaked in some vinegar, which brightened them up without being too harsh on the thin plating. Whatever was hand written on the key tag washed off. I thought it was lightly etched but it must have been pencil.
« Last Edit: April 30, 2026, 09:07:15 PM by mbnaegle »
Logged
"Beware of permanent solutions to temporary problems"

"We do this not because it is easy, but because we thought it would be easy!"
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal