Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: German made Champion 1 row Melodeon  (Read 707 times)

0 Members and 1 Guest are viewing this topic.

mbnaegle

  • Member
  • *
  • Offline Offline
  • Posts: 42
German made Champion 1 row Melodeon
« on: April 28, 2026, 01:25:40 AM »

This is another project Melodeon I'm getting into. I know it's an old economy grade instrument and not very valuable monetarily, but It's sentimental and I think it's age gives it a little respect. I had inquired with a professional melodeon shop to get it repaired and their initial response was that it was possible but wouldn't be cheap. I'm waiting to hear back from them again, but I'm getting the impression that it's only hope will be for me to put the time into it myself, which I'm ok with. I'm still learning to play accordion/melodeon, but have a lot of experience with general antique restoration, wood and leather work, metal work, etc. and enjoy a good project.

I'd be happy if anyone can tell me any technical or historical information about it, as I can't find anything about "Champion" melodeons online. I've found some very very similar units that have other names on them, leading me to believe it was made by a company to be sold in catalogs or department stores under those various names, but I would be interested if "Champion" was a line sold by Montgomery Wards, or someone else.

It plays well enough to force some notes out of it and I've tried learning some songs by ear with it, but I'm not certain what key its in and I need to open it up and fix some things. I started by getting some new hand straps made, but next I need to work on the base and button valves, replacing the seals and giving it a general tune up. The bellows work, but have some holes and leaks to address.

I'm focusing more on getting my 2 row Millano Organetto back to playing again, but I'll post some progress on this one too as it gets fixed up. I'm still very new to these instruments and it would likely be good for me to get a fully functioning one to start with now, but even then I'm looking forward to having these working again.
« Last Edit: April 30, 2026, 09:14:27 PM by mbnaegle »
Logged
"Beware of permanent solutions to temporary problems"

"We do this not because it is easy, but because we thought it would be easy!"

mbnaegle

  • Member
  • *
  • Offline Offline
  • Posts: 42
Re: German made Champion 1 row Melodeon
« Reply #1 on: April 28, 2026, 01:32:56 AM »

I keep getting errors when posting pictures, even after scaling them down, but I'll keep working on it.
« Last Edit: April 30, 2026, 09:17:11 PM by mbnaegle »
Logged
"Beware of permanent solutions to temporary problems"

"We do this not because it is easy, but because we thought it would be easy!"

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: German made Champion 1 row Melodeon
« Reply #2 on: April 28, 2026, 08:29:38 AM »

I keep getting errors when posting pictures, even after scaling them down, but I'll keep working on it.

If you have numbers of photos to post it’s often better to upload them to a photo hosting site and link to them in your posts.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mbnaegle

  • Member
  • *
  • Offline Offline
  • Posts: 42
Re: German made Champion 1 row Melodeon
« Reply #3 on: April 28, 2026, 06:50:00 PM »

I keep getting errors when posting pictures, even after scaling them down, but I'll keep working on it.

If you have numbers of photos to post it’s often better to upload them to a photo hosting site and link to them in your posts.
Thank you. I'll try that. It's odd as I'm also getting errors when I'm only posting text with no pictures and I have to try 5 or 6 times before it posts. I'm 80% certain its a problem on my end.

The etiquette is different on other forums I'm on. Others prefer to post pictures directly so the forum always has an archive saved, but I know it depends on how much server storage is available. I used to post stuff with Photobucket until they changed their account policy and all the photos I had linked across different forums disappeared.
Logged
"Beware of permanent solutions to temporary problems"

"We do this not because it is easy, but because we thought it would be easy!"

mbnaegle

  • Member
  • *
  • Offline Offline
  • Posts: 42
Re: German made Champion 1 row Melodeon
« Reply #4 on: May 07, 2026, 11:13:14 PM »

I reattached the new hand and thumb straps. I think they turned out Ok, at least good enough to practice with.

I drove out of state this week on business and decided to take along the Champion to work on at night in the hotel, and I brought along some materials to start patching the corners and replacing the tape. The bellows have always felt a bit stiff, and after watching some videos online, I stretched them out over my knee and it's much more supple now. Doing this however made all of the stiff dry pieces of tape start to fall off. The leather corners don't feel brittle, but some have torn and punctured. With the way the corners are attached to the cardboard, I don't think I can remove the old leather to replace it without damaging the cardboard, so I'm gluing the new corners over the damaged ones, inside or outside depending on which location works better plugging the hole, reinforcing the corner, and not inhibiting movement. This bellows has never had metal corner aglets, so I'm trying to cut the tape to meet right at the corners. I see this work as just a repair to get it playing again, and the long term solution would be to have new bellows made.

I remember the last time I was playing with this melodeon, it sounded like there was always a chord faintly playing, but taking it apart I learned why. Half the leather valves are missing! I didn't realize it as they're all on the high side that I haven't played yet. Fortunately I've got lots of leather to make new valves. I also found that one of the voice selection knobs doesn't seem to be connected to anything. The other seems to work and slides a wooden panel behind one plate of reeds, but the other has a wood block and no sliding wood panel. I need to take the reed plate off to further investigate if it's just become disconnected from something, or if it's actually a "dummy".
Logged
"Beware of permanent solutions to temporary problems"

"We do this not because it is easy, but because we thought it would be easy!"

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: German made Champion 1 row Melodeon
« Reply #5 on: May 08, 2026, 12:16:55 AM »

It is a dummy stop. They are very common on this type of melodeon.

The faint notes that you hear will not be due to missing leather valves. It is because one or more of the pallets (flappers) is not seating properly on the soundboard (fondo). This applies to the right hand.
If the faint notes are coming from the left hand you will need to remove the growl box in order to seat the flappers.

By the way, those high notes should not be fitted with valves - it's as it should be, with no valves.
This is standard practice on the high reeds in any box.
« Last Edit: May 08, 2026, 12:24:28 AM by rees »
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: German made Champion 1 row Melodeon
« Reply #6 on: May 08, 2026, 12:58:00 AM »

I notice the reed bank with a dummy stop has an extra low reed that is left out in the 'really-stoppable' reed bank, to make room for the wood block linking the stop to the slider. So by design there is only 1 reed speaking on the first button.
Logged

mbnaegle

  • Member
  • *
  • Offline Offline
  • Posts: 42
Re: German made Champion 1 row Melodeon
« Reply #7 on: May 08, 2026, 02:50:37 PM »

Thanks for the replies. I'll get some more pictures as I dig deeper into this side (the right hand end). It would be unfortunate if the knob was a dummy, but looking closer at it I don't see how it would attach to anything under the reed plate. Perhaps there was something on top of the reeds that is now missing? If not that, it could just be an opportunity for some custom work in the future. Perhaps adding a sliding plate that blocks or quiets that bank of reeds?

The other side (left hand growl box) spoon valves will need some work to seal better. The way they pivot makes it hard to get a perfect seal, so I think the sealing discs will be served better by some slightly thicker and softer material. The joints are really loose too so I'm going to replace the pins and see what kind of condition the holes that the pins fit into are in. Worst case, I'll either TIG weld up the holes and re-drill them at the proper size, or just fabricate new pieces. Metal work is my specialty!

The button valves on the right side similarly leak if they are not perfectly aligned. I think most are just loose where they attach to the button levers, but getting better material to seal them against their respective holes should help.
Logged
"Beware of permanent solutions to temporary problems"

"We do this not because it is easy, but because we thought it would be easy!"

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: German made Champion 1 row Melodeon
« Reply #8 on: May 08, 2026, 04:11:51 PM »

Regarding the dummy stop on the right side this is pretty much standard on older German melodeons.  External features were added to make the product look more sophisticated.  Many were sold mail order so a picture in a catalogue was often all the buyer had to go on to make their choice. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mbnaegle

  • Member
  • *
  • Offline Offline
  • Posts: 42
Re: German made Champion 1 row Melodeon
« Reply #9 on: May 11, 2026, 08:08:55 PM »

Regarding the dummy stop on the right side this is pretty much standard on older German melodeons.  External features were added to make the product look more sophisticated.  Many were sold mail order so a picture in a catalogue was often all the buyer had to go on to make their choice.
This made me think of a story I heard about a guitarist, Lee Sklar I think, who added a dummy "producer" switch to his electric guitar.
******
"And how about your “Producer Switch”?

Ah, the Producer Switch! That was inspired by incompetent producers ignorant of music terminology, who would make nebulous statements like, “Can you make it shimmer?” Or, “Can you make it more mauve-y?” I had done a TV session where Tommy Tedesco—out of sight of the producer, except for his head—kept bending over and picking up the same acoustic guitar when asked to try mandolin and other stringed instruments. He would simply play in a different position on the neck, and it worked! So I immediately went home and drilled a hole in my bass and put in a dummy Switchcraft switch. Then when I would get one of these tenuous requests, I would make sure the producer could see me hit the switch, and I’d just play higher up on the neck or pluck closer to the bridge, and they’d say, “Perfect!” On my Warwick Star Basses there was an extra hole from a change in the electronics, so I had them put a Producer Switch on them."
Logged
"Beware of permanent solutions to temporary problems"

"We do this not because it is easy, but because we thought it would be easy!"

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: German made Champion 1 row Melodeon
« Reply #10 on: May 11, 2026, 10:14:01 PM »

My old Hohner has a couple of small filled holes in the case where something was once attached to it.

I'm definitely screwing a 'more mauve-y' switch to it.
Logged
Vintage Double Ray C#/D
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal