A problem I've often encountered, but have rarely had an easy solution for, is a bass reed metallic 'rattle' that ONLY occurs for a brief, split second after the note has stopped playing. There is no rattle while the bass reed is playing, only for a moment when it stops. In the past, I've checked/replaced valves (although it's clearly a metallic ringing noise and not regular valve noise), filed down the profile of the reed edges (in case something was striking the side of the reed tongue opening), tightened rivets, adjusted gap and so on. Sometimes I've been able to mitigate the sound but not eliminate it completely. The frustrating thing is not knowing exactly what the issue is in the first place. It's not the sound of the reed tongue hitting the back of the chamber (that always results in a sharp increase in pitch as well). If the reed tongue was striking something else, surely it would also be heard during the height of the reed's swing, rather than only at the end. I'm certain you've all encountered this before...ideas?