Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Turner prototype  (Read 2908 times)

0 Members and 1 Guest are viewing this topic.

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Turner prototype
« on: May 11, 2026, 01:03:57 PM »

Has anyone here tried the prototype Turner melodeon from Squeezebox Marketplace folks.  Just interested to hear about a 'new' maker brand.
Logged

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: Turner prototype
« Reply #1 on: May 11, 2026, 03:26:24 PM »

There's nothing on his website that I could see.
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Re: Turner prototype
« Reply #2 on: May 11, 2026, 04:32:45 PM »

Apparently there were 2 instruments at Upton for folks to try for feedback purposes, and Rees Wesson has a vid. on his website.
Logged

Helena Handcart

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2452
  • Saltarelle Nell
Re: Turner prototype
« Reply #3 on: May 11, 2026, 06:16:27 PM »

Apparently there were 2 instruments at Upton for folks to try for feedback purposes, and Rees Wesson has a vid. on his website.

No doubt they will also be on the stall at Chippenham.
Logged
Saltarelle Le Romané  | Saltarelle Nuage | Oakwood | various elderly Hohners

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Turner prototype
« Reply #4 on: May 11, 2026, 07:45:48 PM »

Apparently there were 2 instruments at Upton for folks to try for feedback purposes, and Rees Wesson has a vid. on his website.


It's not on my website, it's on Facebook.

https://www.facebook.com/reel/1657888905526758
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Turner prototype
« Reply #5 on: May 12, 2026, 10:30:38 AM »

This is another incarnation of Oakwood, isn't it? I looked at the Squeezebox Marketplace web site and found a picture of the same John Turner who ran The Music Room, once the main retail outlet for Oakwood. The instrument looks similar, and the comments about it being loud and a perfect morris box are like the description of the Dino Baffetti/Oakwood Binci box.

I'll be watching with interest...
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Turner prototype
« Reply #6 on: May 12, 2026, 12:09:29 PM »

This is another incarnation of Oakwood, isn't it? I looked at the Squeezebox Marketplace web site and found a picture of the same John Turner who ran The Music Room, once the main retail outlet for Oakwood. The instrument looks similar, and the comments about it being loud and a perfect morris box are like the description of the Dino Baffetti/Oakwood Binci box.

I'll be watching with interest...

Yes, the same John Turner.
The box is a copy of the Oakwood, made in Italy.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Turner prototype
« Reply #7 on: May 12, 2026, 03:37:43 PM »

Does this prototype signify the DB Binci ( that followed the DB Oakwood special ) ceased production?
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Turner prototype
« Reply #8 on: May 12, 2026, 03:43:36 PM »

Does this prototype signify the DB Binci ( that followed the DB Oakwood special ) ceased production?

I doubt it as the new Turner model is not made by Dino Baffetti.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Turner prototype
« Reply #9 on: May 12, 2026, 04:02:41 PM »

Thanks Rees. Sorry, am a bit rusty on who made what in that neck of the woods.
Is there any details about where it's made, i.e. in house or by a continental factory?
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Turner prototype
« Reply #10 on: May 12, 2026, 04:11:33 PM »

Thanks Rees. Sorry, am a bit rusty on who made what in that neck of the woods.
Is there any details about where it's made, i.e. in house or by a continental factory?

All I know is that it's made in Italy. Mr Turner is not revealing where.
Here's another Facebook link.
https://www.facebook.com/reel/1722617055571835
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Turner prototype
« Reply #11 on: May 12, 2026, 04:13:29 PM »

This from John Turner:

"They are not yet on sale. The one you see it’s a sample we managed to get to show to people. They are certainly turning heads, keep an eye on the website for announcements."
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Turner prototype
« Reply #12 on: May 13, 2026, 12:47:04 AM »

Hmmm ... from that video they definitely have the Oakwood grille pattern.  Interesting for many reasons!!!  I don't like the idea of makers deliberately confusing the consumer as to who have made the instruments they are buying with methods like this ... I understand how complicated the relationship between John Turner (squeezebox marketplace) and Martyn Banks (Oakwood) is, but I don't think it's necessary for their conflicts to be used to complicate buying musical instruments for the consumer.

The box sounds nice in the video though.

Edit: If the Turner prototype box is good enough then it would sell well based on its playing qualities and aesthetics without copying the Oakwood grille ... I can't see any good reason for doing that other than either to confuse the buyer or for personal reasons ... neither of which are valid.
« Last Edit: May 13, 2026, 12:58:37 AM by squeezy »
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Turner prototype
« Reply #13 on: May 13, 2026, 01:18:46 AM »

Well said John.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Turner prototype
« Reply #14 on: May 13, 2026, 07:44:49 AM »

Thanks John.
I'd noticed the grill and yes, 'confused' sums it up.
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Helena Handcart

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2452
  • Saltarelle Nell
Re: Turner prototype
« Reply #15 on: May 14, 2026, 10:29:04 AM »

I must admit, at first glance I thought it looked so much like an Oakwood that Martyn must be involved - unlikely though that is. Equally, the last batches of Oakwoods that Martyn made have a very different design and grille pattern - I am lucky enough to have number 1 of 10 2-voice models and it is a joy.

I'll be interested to see, and try, the new model but agree with previous posters that making a thing which is not an Oakwood look too much like an Oakwood is not a good thing for multiple reasons.
Logged
Saltarelle Le Romané  | Saltarelle Nuage | Oakwood | various elderly Hohners

Mark Rogers

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Turner prototype
« Reply #16 on: May 23, 2026, 05:16:34 PM »

Tried them today at Chippenham. Gorgeous. I could see the Tipo a Mano being better for Morris than the handmade reeds.  Much nicer playing than my Binchi II, lighter, prettier and good volume.

Obviously not an Oakwood thanks to the large raised ‘Turner’ on the front.
Logged
Lilly / Binchi II / Tommy

Musician for The Outside Capering Crew & Stroud Morris.  Morris musician tart, and very former dancing tart.  Also play percussion/timpani & recorder.

nigelr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 526
Re: Turner prototype
« Reply #17 on: May 24, 2026, 07:52:22 PM »

Likewise, I tried one at Chippenham today.  Loud, punchy and light. Certainly a good box.

The two big minuses for me were (a) the bass reed layout means there isn't a third stop option and (b) the eye-watering price tag.

Not enough to coax me away from my DB Oakwood Super 2.
Logged
DB Oakwood Super 2 (D/G), Club II (D/G Will Allen layout), Erika (Bb/Eb) and an HA114 in C

CAB

  • Mass Debater
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1147
    • Somerset Russets Village Band
Re: Turner prototype
« Reply #18 on: May 25, 2026, 10:23:46 AM »

I too tried both the TAM and hand-made reed options at Chippenham yesterday.  Both impressed me.  I was reminded of the power and projection of my Wheatstone model 22 EC with its shallow reed pans and they confirmed the Turner has the same characteristic for similar reasons.

The action is very fast, apparently owing to using metal in place of wood.  What struck me was the ease with which I could do the trick of hitting a button three times in quick succession with consecutive fingers, which is always a bit hit and miss on my existing boxes but proved very reliable on the Turner because the action returns so quickly after each strike.  I suggested they should think about a BC model for the Irish market, where that rapidity would go down very well.

I confirm both of Nigel's minuses.  You'd have to either have one without left-hand thirds or tape 'em off.  No room for a stop mechanism, apparently.  And yes, they won't come cheap!  I was told the difference between TAM and hand-made might be around £200 or so, not much difference in the context of around 4000.
« Last Edit: May 25, 2026, 10:27:31 AM by CAB »
Logged
Pas de lieu Rhone que nous

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144
Re: Turner prototype
« Reply #19 on: May 25, 2026, 08:07:39 PM »

...The action is very fast, apparently owing to using metal in place of wood.  What struck me was the ease with which I could do the trick of hitting a button three times in quick succession with consecutive fingers, which is always a bit hit and miss on my existing boxes but proved very reliable on the Turner because the action returns so quickly after each strike.  I suggested they should think about a BC model for the Irish market, where that rapidity would go down very well.

I confirm both of Nigel's minuses.  You'd have to either have one without left-hand thirds or tape 'em off.  No room for a stop mechanism, apparently.  And yes, they won't come cheap!  I was told the difference between TAM and hand-made might be around £200 or so, not much difference in the context of around 4000.

I also mentioned to Mr. Turner that a compact box like that in B/C or C#/D would be quite nice and he argued that because there are only 19 buttons it would probably not happen, as he believes most semitone players wouldn't like the missing notes. I'd argue that, there are still a great many tunes I can play with 19 buttons and the old D/C# boxes were often 19 buttons and you can really get a lot out of those.

Also, regarding treble mechanism, I reckon that speed increase is also just overall down to design and spring tension as I've played a good many traditional wood action stepped keyboards with great speed. Sharon Shannon comes to mind as someone who whips around on a tommy just fine in that respect, and there's also some prodigious Italian organetto players that are just wildly fast. But if you're saying that it's just a super quick action in general, id also buy that for a dollar.

Speaking of dollars, without knowing the provenance of the instrument, I'm not sure I'd be super keen to spend £4,000 quid. I get protecting your perception of value and overhead, but for that much money I really want to know who's made my instrument
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal