Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: C#d Corso stiff to play  (Read 1218 times)

0 Members and 1 Guest are viewing this topic.

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
C#d Corso stiff to play
« on: May 25, 2026, 11:20:58 PM »

Hi. I had my c/c# Hohner Corso converted to C#D. New Hohner reeds used fo D row.  The response of the is ok but it seems much stiffer and heavier than before. Any ideas please.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: C#d Corso stiff to play
« Reply #1 on: May 26, 2026, 09:01:01 AM »

New Chinese made reeds are a little different from older ones, that might be what you are feeling. The difference is not great but it is there.  The main thing I’ve noticed is that the tone is a little softer,  but response might be different too.
I’m assuming that the person who did the tuning chooses good valves and is handy at waxing.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: C#d Corso stiff to play
« Reply #2 on: May 26, 2026, 10:34:10 AM »

IME, new or "new to me" instruments often require a break on period.  This can mean mechanical maturation of the box and /or muscular familiarization with the instrument itself.  Both  can require significant time on target.
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: C#d Corso stiff to play
« Reply #3 on: May 26, 2026, 11:58:07 AM »

Thank you for replies. Possibly needs getting used to. It is as if the air flow is restricted. As if the air holes aren't big enough. The response is fine as is the volume. The reeds are from the Hohner shop and then removed from the blocks and transferred to the Corso blocks. The  reeds were already valved. The tuning was done by a very competent person and sounds great. Tuned +/- 15 .
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: C#d Corso stiff to play
« Reply #4 on: May 26, 2026, 12:17:14 PM »

Has the button travel been changed?  Very short button travel does restrict air flow.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: C#d Corso stiff to play
« Reply #5 on: May 26, 2026, 02:14:01 PM »

Just curious: do you experience the stiff-and-heavy feeling on all reeds including the old C# ones, or only on the D row where the new reeds are ??

Could it be that the box air-tightness has been improved (new bellows gasket, say), along with the reed work ?



Logged

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: C#d Corso stiff to play
« Reply #6 on: May 26, 2026, 02:56:10 PM »

Hi Theo. Yes indeed. The treble buttons have been lowered and the pallet pads replaced with thicker felt. Maybe this is the price to pay for quiet pallets and a very comfortable keyboard.

Hi Tirpous. Thank you for your question. Yes I would say that the C# row is slightly better. I have found playing any Corso on the outside row feels freer. Probably due to the pallet lift. Also, the original older C# reeds are now fitted on the outside row with the modern Chinese reeds on the  inside row. New gaskets were fitted.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: C#d Corso stiff to play
« Reply #7 on: May 28, 2026, 08:33:43 AM »

Given that the reeds came from the c shop I'd guess the keyboard mods are the culprit. If not done right it can seriously mess up the 'go' of an instrument. In general I am reluctant to make these kinds of mods for this very reason.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: C#d Corso stiff to play
« Reply #8 on: May 28, 2026, 04:49:06 PM »

I've done a fair number of Corso conversions to C#/D, often using new tip-a-mano reeds from Voci Armoniche.  I've often been surprised to find that the new TAM VA reeds actually felt stiffer than the original Hohner reeds!  I believe part of this comes down to the reeds being new and needing some time to get 'worked/broken-in', so it wouldn't surprise me if the new Hohner reeds felt a little stiffer than the older ones from the C# row which presumably have already had years of playing time in them. 

Another thing that hasn't been mentioned here is the setting of reed gap.  A tight reed gap can give a the reeds a wonderful and immediate response with low bellows pressure but can also result in the box feeling a little stiff if those gaps are set too low.  I find it can be a bit of a compromise, depending on the type and quality of reeds, the box itself, and the player.

I'm doubtful that the keyboard adjustments have resulted in the response of the box feeling stiffer.  I regularly modify Hohner keyboards to limit button travel, lower button height, etc and I find most Hohners have a fair bit of leeway before the volume or tone (and tuning) is affected.  Corsos in particular have plenty of pallet lift on even the inside row and so can take adjustments without issue.  Also, as Paul Groff has mentioned on here before, the sound difference one gets between the rows has more to do with the position of the sound holes in relation to the surrounding components and less to do with pallet lift itself.  I have also found this to be true.

Michael, in regards to you mentioning that you find Corsos generally play easier on the outside row, I'd suggest this is due to the longer button levers.  Generally speaking, the longer the button lever, the nicer and easier the action.
Logged
C#/D player

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: C#d Corso stiff to play
« Reply #9 on: May 28, 2026, 07:24:06 PM »

Thank you to Rog and mselic  for your contributions. Today, I acquired an original 1950's Corso (flush grill) similar to my offending C#D. No modifications to pallets, button travel or reeds. Key of C on inside row and apart from the discomfort of the button height and travel it has plenty  "GO". (Thanks for the word Rog. Describes perfectly what I was trying to articulate) I will swap the reed blocks between the two instruments and report back the outcome. If it is simply the reeds and reed gap as suggested by Matt Selic and others I should see little or no improvement.  Likewise, if I experience an ease in the playing effort then maybe it is the pallet felt thickness and button travel. Anyway, that's the theory!  On the subject of the longer arms for the outside row, has anybody modified the levers to reverse the action.  It would be pointless for diatonic players but very interesting for C#D player. I once had a Salterelle Boube with reverse setup and it was a joy to play but alas did not have the same vibe as a well bred Corso. Also, does the size of the holes in the soundboard and reed blocks affect the behaviour of the box? Thanks to all. 
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: C#d Corso stiff to play
« Reply #10 on: May 29, 2026, 08:36:37 AM »

When you say "stiff", what exactly do you mean?

"Stiff" is a characteristic of the keyboard and relates to spring tension. It's when it takes too much effort to depress the key.
If the air flow wasn't enough, the reeds wouldn't hold their pitch at different dynamics.
Poor gapping would instantly kill response. But you say response is fine. If response is fine, then what's the problem?

Reeds from Hohner shop - is that T plates or H plates? They are *cough* quite far from being the world's best reeds, to put it politely, so I wouldn't expect much dynamic range from them.
« Last Edit: May 29, 2026, 08:40:58 AM by mChavez »
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: C#d Corso stiff to play
« Reply #11 on: May 29, 2026, 11:51:32 AM »

If this was my instrument, I would closely inspect the blocks on a tuning table and observe how it sounds and feels. It is possible the valves need adjusting (if they are glued too far up the slot..this can affect the go considerably) or the reeds need setting properly. If the problem persists, I might even consider fitting two or three of the old reeds back on the block to see if there’s any difference. This way you can eliminate the reeds and focus on the keyboard mods, or conclude that it is the new reeds that are causing the problem.
« Last Edit: May 29, 2026, 11:54:35 AM by Rog »
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: C#d Corso stiff to play
« Reply #12 on: May 29, 2026, 01:17:51 PM »

It would be interesting to compare the reed gaps on the new D reeds to the old C# reeds. I’m suspecting the new ones will be visibly wider. Would the person who fitted them have voiced the reeds?.. My most recent purchase was a BC double ray from China with fairly poor response, but with some time spent voicing the reeds (reducing the gaps by pushing/pulling reeds through slots with moderate pressure), it’s now as good as any other Hohner box in that regard…
Logged
Dancing about architecture since 1997

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: C#d Corso stiff to play
« Reply #13 on: May 29, 2026, 06:10:24 PM »

Thank you mchavez for your interest: Stiff may not be the correct word. Since fitting the new reed blocks, new pallet pads and button height the push/ pull  action of the bellows seems heavier. The reeds do respond ok at low pressure. The compression is good, no leaks.

Thank you Arnold for advice. I will check and compare. 
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: C#d Corso stiff to play
« Reply #14 on: May 29, 2026, 10:32:38 PM »

Pallet lift issue is easy to diagnose - on a strong push your lowest notes will "bend" the pitch down if there's not enough lift.

Could it be that the new reeds are noticeably better than the originals, so there's more air resistance when you play?
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: C#d Corso stiff to play
« Reply #15 on: June 01, 2026, 05:19:01 AM »

Thank you mchavez for your interest: Stiff may not be the correct word. Since fitting the new reed blocks, new pallet pads and button height the push/ pull  action of the bellows seems heavier. The reeds do respond ok at low pressure. The compression is good, no leaks.

Thank you Arnold for advice. I will check and compare.

The push-pull action that you're describing relates directly to the performance of the reeds more so than any other factors.  It's not pallet lift that would cause this (your pallets would have to be barely lifting off the fondo at all for the reeds to feel stifled).  Given that you have a new set of reeds installed for your D row, it's most likely the reeds themselves, how they're set up, or a combination of both that is causing the box to now feel stiffer in that push-pull dynamic than it did before.  I've been in the situation myself many times when a different set of reeds completely transforms how a box feels, all other factors remaining the same.
Logged
C#/D player

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: C#d Corso stiff to play
« Reply #16 on: June 02, 2026, 08:12:02 PM »

Thanks to all for your interest. I moved the new reed blocks from the modified box
 to an umodified Corso of similar vintage. They still felt stiffer in the unmodifed box.
The reeds were tuned and set up by a competent tuner. The reed gap looks ok and the reeds
Respond well outside the box. The reed valves operate normally.
I conclude that reed quality is the problem. (T Reeds supplied on blocks from Hohner)
I would appreciate any suggestion as to what brand of reed I might use should I decide to replace them.
 
Logged

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: C#d Corso stiff to play
« Reply #17 on: June 02, 2026, 09:17:37 PM »


New eeds need breaking in! You can't count on them matching all the parameters of existing reeds that have been played in. Given enough playing time, I would say differences between the new and old reeds
will diminish and they'll start to "agree" with one another as much as material and workmanship allow.

Everything takes time...
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: C#d Corso stiff to play
« Reply #18 on: June 03, 2026, 11:51:24 AM »

Thank you Dick Rees. I will put it through it's paces over the next few months and see what happens.
Maybe increase left arm strength. An interesting range of views and very informative. Thanks all.
Logged

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: C#d Corso stiff to play
« Reply #19 on: June 03, 2026, 12:05:17 PM »

Thank you Dick Rees. I will put it through it's paces over the next few months and see what happens.
Maybe increase left arm strength. An interesting range of views and very informative. Thanks all.

Sometimes it takes a year or two to really settle in...
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal