Hello everyone,
I am currently restoring an older red Hohner Corso and I have a question about the original front decoration/logo.
On the red celluloid front, the “HOHNER”, “CORSO” lettering and the decorative pattern are partly worn away. I would like to restore or reproduce it as close to the original appearance as possible.
From looking closely at the remaining lettering, it does not seem to be raised lettering or a normal sticker. There is no obvious edge. My guess is that it may have been screen printed, transfer printed, or possibly printed in layers.
One thing I noticed is that the HOHNER lettering appears to have a gold/copper-gold outline with red inside the letters. I am wondering if the original process may have been something like:
gold/copper-gold lettering printed first
red infill printed over it afterwards
leaving the gold outline visible
Or perhaps it was simply an outline print, with the red celluloid showing through.
Does anyone know how Hohner originally applied these logos/decorations on the red Corso models?
I would also be interested to hear if anyone has successfully restored this type of logo. For example:
screen printing
waterslide transfers
dry rub-on transfers
thin vinyl
hand painting/stencilling
custom decals
I am not planning to clear coat just the logo area, as I think that would probably leave a visible patch. Ideally, I would like a very thin and flat result, close to the original look.
Any information, photos of original examples, or advice from restorers would be greatly appreciated.
Thanks in advance!